Wraps by car

BYD Han wrap

The BYD Han wrap page covers the first-generation Han sedan built from 2020 onward. The catalog includes one generation of this full-size electric and plug-in hybrid sedan. A complete color change wrap of the current body uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. A chrome or patterned film wrap takes about 64 ft (19.5 m) of the same width.

1generations16 mof film for a full wrap

BYD Han, first generation, factory photo
BYD Han, first generation. Factory color shown.

BYD Han wrap colors and ideas

  • Han black wrap
  • Han white wrap
  • Han gray wrap
  • Han silver wrap
  • Han red wrap
  • Han blue wrap
  • Han green wrap
  • Han yellow wrap
  • Han orange wrap
  • Han purple wrap
  • Han pink wrap
  • Han teal wrap
  • Han brown wrap
  • Han gold wrap
  • Han chrome wrap
  • Han color shift wrap
  • Han carbon fiber wrap
  • Han camo and patterned wrap

How much vinyl to wrap a BYD Han

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowsedan (4 doors)196.1 in (4,980 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Han wrap cost factors

Han wrap cost depends on the film area and the level of detail work on this full-size sedan. A full wrap uses about 52 ft (16 m) of cast film for a standard color, and chrome or patterned film takes about 64 ft (19.5 m). The labor is higher because of the flush door handles, the parking sensors and the cameras that need individual cut-outs. A partial wrap or a chrome delete costs less because it covers less area.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has flush door handles: each handle is wrapped as a small piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2022, 2024: bumpers and lights differ between the versions, and so do the film cuts.

Han wraps by generation

Swipe sideways. Tap a card for the full description.

BYD Han, first generation, factory photo
Factory color shown

2020–now Han sedan (first generation)

2020–nowsedan (4 doors)196.1 in (4,980 mm)

The first-generation BYD Han is a four-door sedan with a panoramic glass roof on every trim. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails, which gives a clean edge around the glass. This also means the roof does not add to the film area.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has flush door handles: each handle is wrapped as a small piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Han

A partial wrap on a BYD Han can cover the hood, mirror caps or trunk lid instead of the whole car. A chrome delete turns the window trim and badges black with film, which changes the look without a full wrap. Paint protection film (PPF) is a clear film on the front end to guard against stone chips. These jobs use less film and take less time than a full color change wrap.

  • Partial wrap: hood, mirror caps, trunk lid.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BYD Han: body, cut-outs and film

A BYD Han vinyl wrap has to follow the lines of a four-door sedan that is 196.1 in (4,980 mm) long. The long hood and roof sections make good use of a 60-inch (1.52 m) roll with less waste. The flush door handles are wrapped as small pieces so the film stays neat around them. A full-size sedan like this needs more film than a compact car, which is why the estimate is 52 ft (16 m).

Han wrap ideas start with the parts that need cut-outs or come off the car. Every trim has a panoramic glass roof, so the film ends at the roof rails and the glass is not wrapped. The bumpers have parking sensors that the film is cut around, and the body cameras get a cut-out around each lens. The charge port door on the plug-in and electric versions is wrapped as a small piece of its own so it can still open.

If you want to know how much vinyl to wrap a Han, check the production year and restyling years. The first generation has run from 2020 to now, with restyles in 2022 and 2024. The restyles changed some bumper and trim shapes, so film patterns may differ between early and late cars. For a current body, the film estimate is about 52 ft (16 m) of cast film.

Questions about wrapping a BYD Han

How much vinyl does it take to wrap a BYD Han?

A full wrap of a BYD Han takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, plan for about 64 ft (19.5 m) because of pattern matching. These figures are for the newest body, which is the only generation in the catalog.

Can the roof of a Han be wrapped?

No, the roof of a Han cannot be wrapped because every trim has a panoramic glass roof. Glass is not wrapped, so the film ends at the roof rails. The roof stays its original dark glass color no matter what film goes on the car.

Which years of the Han take the same film cuts?

The Han has been built from 2020 onward, with restyles in 2022 and 2024. The same film cuts fit cars within each period: 2020 to 2021, 2022 to 2023, and 2024 to now. A restyle may change the shape of bumpers or trim parts, so a pattern from before the restyle may not fit a later car.

Can I wrap only the hood or the roof of a Han?

Yes, you can wrap only the hood or the roof of a Han, but the roof is glass and is not wrapped. A partial wrap can cover the hood, mirror caps or trunk lid on their own. For the roof, a full wrap is not possible because the panoramic glass roof is left unwrapped.