Wraps by car

BYD Shark wrap

The BYD Shark wrap page covers the first-generation pickup produced from 2024 to now. A full vinyl wrap of the newest body takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. The Shark is a four-door pickup with one generation in the catalog.

1generations21.5 mof film for a full wrap

BYD Shark, first generation, factory photo
BYD Shark, first generation. Factory color shown.

BYD Shark wrap colors and ideas

  • Shark black wrap
  • Shark white wrap
  • Shark gray wrap
  • Shark silver wrap
  • Shark red wrap
  • Shark blue wrap
  • Shark green wrap
  • Shark yellow wrap
  • Shark orange wrap
  • Shark purple wrap
  • Shark pink wrap
  • Shark teal wrap
  • Shark brown wrap
  • Shark gold wrap
  • Shark chrome wrap
  • Shark color shift wrap
  • Shark carbon fiber wrap
  • Shark camo and patterned wrap

How much vinyl to wrap a BYD Shark

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowpickup (4 doors)214.8 in (5,457 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Shark wrap cost factors

A Shark wrap cost depends on film type, coverage, and the work the body needs. A full wrap uses about 70 ft (21.5 m) of 60-inch (1.52 m) film, or 82 ft (25 m) for chrome or patterned film. The pickup bed and tall roof add labor compared with a lower vehicle.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (75.8 in (1,925 mm)): the roof is wrapped from a platform.

Shark wraps by generation

Swipe sideways. Tap a card for the full description.

BYD Shark, first generation, factory photo
Factory color shown

2024–now Shark pickup (first generation)

2024–nowpickup (4 doors)214.8 in (5,457 mm)

The first-generation BYD Shark has a pickup bed that is wrapped as a separate body from the cab. The inside of the bed stays bare. This generation is the only one in the catalog, produced from 2024 to now.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (75.8 in (1,925 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Shark

For a smaller job than a full wrap, a Shark partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied to the front end with clear film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BYD Shark: body, cut-outs and film

The BYD Shark vinyl wrap is shaped by the pickup body, which is 214.8 in (5,457 mm) long and 75.8 in (1,925 mm) tall. The cab and the bed are wrapped as two separate bodies, and the film does not go inside the bed. The tall roofline means a platform is needed to reach the roof.

Shark wrap ideas start with the pickup bed, because the cab and the bed are wrapped as two bodies. The badges and window trim can be covered with black film for a chrome delete. The roof is wrapped from a platform due to the 75.8 in (1,925 mm) height.

How much vinyl to wrap a Shark depends on the film type. A color change wrap uses about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 82 ft (25 m).

Questions about wrapping a BYD Shark

How much vinyl does it take to wrap a BYD Shark?

A BYD Shark takes about 70 ft (21.5 m) of 60-inch (1.52 m) vinyl for a full wrap. The estimate is for cast film on the newest body. Chrome or patterned film raises the amount to about 82 ft (25 m).

Is the bed of a Shark wrapped?

No, the bed of a Shark is not wrapped on the inside. The cab and the outside of the bed are wrapped as two bodies. The inside of the bed stays bare.

Can I wrap only the hood or the roof of a Shark?

Yes, you can wrap only the hood or the roof of a Shark. A partial wrap can cover the roof, hood, or mirror caps. The roof needs a platform because the truck is 75.8 in (1,925 mm) tall.

Is a Shark hard to wrap?

Yes, a Shark is harder to wrap than a lower vehicle. The pickup bed means the cab and bed are two separate bodies. The 75.8 in (1,925 mm) roof height adds work with a platform.