Wraps by car

BYD Han L wrap

This page covers the BYD Han L wrap and what a vinyl wrap involves. The BYD Han L has one generation in this catalog, built from 2025 to now. Its newest body is a mid-size sedan, 198.8 in (5,050 mm) long with four doors. A full wrap of that body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

BYD Han L, first generation, factory photo
BYD Han L, first generation. Factory color shown.

BYD Han L wrap colors and ideas

  • Han L black wrap
  • Han L white wrap
  • Han L gray wrap
  • Han L silver wrap
  • Han L red wrap
  • Han L blue wrap
  • Han L green wrap
  • Han L yellow wrap
  • Han L orange wrap
  • Han L purple wrap
  • Han L pink wrap
  • Han L teal wrap
  • Han L brown wrap
  • Han L gold wrap
  • Han L chrome wrap
  • Han L color shift wrap
  • Han L carbon fiber wrap
  • Han L camo and patterned wrap

How much vinyl to wrap a BYD Han L

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowsedan (4 doors)198.8 in (5,050 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Han L wrap cost factors

The Han L wrap cost is set by the film length, the film type, and how much of the car is covered. The sedan body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film, and patterned film can take about 74 ft (22.5 m). A full wrap costs more than a partial wrap because the installer spends more working hours on every panel. The charge port door and the four doors add small pieces that make the job longer.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: sedan (4 doors).
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Han L wraps by generation

Swipe sideways. Tap a card for the full description.

BYD Han L, first generation, factory photo
Factory color shown

2025–now Han L sedan (first generation)

2025–nowsedan (4 doors)198.8 in (5,050 mm)

The first generation BYD Han L is a mid-size sedan built from 2025 to now. The four-door body is 198.8 in (5,050 mm) long, which is a standard size for a full vinyl wrap. A full wrap of this generation takes about 62 ft (19 m) of 60-inch (1.52 m) cast film, or about 74 ft (22.5 m) for chrome or patterned film. The charge port door is wrapped as its own small piece on plug-in and electric versions.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Han L

A partial wrap on the BYD Han L covers the roof, the hood, or the mirror caps in one color. A chrome delete on this sedan turns the window trim and the badges black. Clear paint protection film (PPF) on the front end covers the bumper, part of the hood, and the mirrors without changing the color. A partial wrap uses less film than a full body wrap and leaves the rest of the paint visible.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BYD Han L: body, cut-outs and film

The BYD Han L vinyl wrap uses one film for the whole sedan body. The car is 198.8 in (5,050 mm) long, so a full color change needs about 62 ft (19 m) of 60-inch (1.52 m) cast film. Four doors and a fixed roof mean the installer cuts and tucks film into the same panel count as other mid-size sedans. The trunk and hood are wide, and the bumpers wrap around the ends of the car.

Good Han L wrap ideas always plan the cut-outs before the film goes on. The charge port door on plug-in and electric versions is wrapped as a small piece of its own. Door handles, the front grille, sensors, and the badges are removed or cut around so the body film lies flat. The window trim stays unwrapped in a full color change unless the owner adds a separate chrome delete.

The answer to how much vinyl to wrap a Han L depends on the version and the film design. Because the catalog lists one generation, the 2025–now mid-size sedan is the only body to measure for. A full wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film on that body. If the design uses chrome or patterned film, the figure rises to about 74 ft (22.5 m) to match the pattern.

Questions about wrapping a BYD Han L

How much vinyl does it take to wrap a BYD Han L?

A full wrap of a BYD Han L takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. If the design is chrome or patterned, the figure goes up to about 74 ft (22.5 m) to match the pattern. These are the film estimates for the 2025–now mid-size sedan body with four doors.

Can I wrap only the hood or the roof of a Han L?

Yes, you can wrap only the hood or the roof of a Han L. A partial wrap on this car covers the roof, the hood, or the mirror caps as separate jobs. The installer cuts the film to those panels only, so less material is used than for a full wrap.

Is a Han L hard to wrap?

A Han L has a few points that add work for an installer. The charge port door on plug-in and electric versions is wrapped as a small piece of its own. The sedan is 198.8 in (5,050 mm) long, so a full wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Door handles, the grille, sensors, and the badges also need cut-outs or removal.

How many generations of the Han L does this page cover?

This page covers one generation of the Han L. The catalog lists the first generation, built from 2025 to now, as a mid-size sedan with four doors.