Wraps by car

BYD Atto 3 wrap

The BYD Atto 3 wrap is a vinyl wrap made for one generation of this electric SUV, produced from 2022 to now. The newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full color change wrap. The car is a five-door SUV, 175.4 in (4,455 mm) long, which is a useful number when you plan film. We focus on the first generation, the only one in our catalog.

1generations18.5 mof film for a full wrap

BYD Atto 3, first generation, factory photo
BYD Atto 3, first generation. Factory color shown.

BYD Atto 3 wrap colors and ideas

  • Atto 3 black wrap
  • Atto 3 white wrap
  • Atto 3 gray wrap
  • Atto 3 silver wrap
  • Atto 3 red wrap
  • Atto 3 blue wrap
  • Atto 3 green wrap
  • Atto 3 yellow wrap
  • Atto 3 orange wrap
  • Atto 3 purple wrap
  • Atto 3 pink wrap
  • Atto 3 teal wrap
  • Atto 3 brown wrap
  • Atto 3 gold wrap
  • Atto 3 chrome wrap
  • Atto 3 color shift wrap
  • Atto 3 carbon fiber wrap
  • Atto 3 camo and patterned wrap

How much vinyl to wrap a BYD Atto 3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)175.4 in (4,455 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Atto 3 wrap cost factors

The Atto 3 wrap cost depends on film choice, the number of panels, and how much disassembly the car needs. A full wrap of this 175.4 in (4,455 mm) SUV takes about 61 ft (18.5 m) of cast film, or 69 ft (21 m) for chrome or patterned film. The price of a wrap also changes with the shop's labor: cutting around sensors and cameras adds hours. Since this is an electric car, the charge port door adds one more small wrapped piece.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2024, 2026: bumpers and lights differ between the versions, and so do the film cuts.

Atto 3 wraps by generation

Swipe sideways. Tap a card for the full description.

BYD Atto 3, first generation, factory photo
Factory color shown

2022–now Atto 3 SUV (first generation)

2022–nowSUV (5 doors)175.4 in (4,455 mm)

The first generation BYD Atto 3, produced from 2022 to now, offers a glass roof on some trims. The glass roof is not wrapped, so the roof stays dark whatever the color of the film. On those cars, the film ends at the roof rails, or the rails are removed before the wrap. This generation was restyled in 2024 and 2026, and a wrap shop checks the glass roof pattern for each restyle.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Atto 3

An Atto 3 chrome delete covers the window trim and badges with black film, a smaller job than a full wrap. A partial wrap can be the hood, mirror caps, or roof on cars without the glass panel. Paint protection film (PPF) is clear film on the front end, and it is also a partial job on this 175.4 in (4,455 mm) SUV. These smaller wraps use less film and take fewer hours than a full color change.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BYD Atto 3: body, cut-outs and film

The BYD Atto 3 vinyl wrap fits a five-door SUV body that is 175.4 in (4,455 mm) long, so a full wrap means large doors, fenders, and a tailgate. The tailgate includes the rear glass, and the film ends at the edge of that glass. Some trims have a panoramic glass roof and roof rails, and these parts change how the roof is covered. The wrap installer measures every panel and adds a few extra feet for mistakes and deep edges.

Atto 3 wrap ideas start with a full color change, but some parts need extra care. Every trim has parking sensors in the bumpers, and the film is cut around each sensor. Every trim also has cameras in the body, and the film is cut around each lens. The charge port door is wrapped as a small piece of its own. On trims with roof rails, they come off before the roof is wrapped, or the film is cut along them.

How much vinyl to wrap an Atto 3 depends on the roof style and the finish, but the base figure is about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes more, about 69 ft (21 m), because the pattern must be matched. The first generation started in 2022 and was restyled in 2024 and 2026, but the body length stayed at 175.4 in (4,455 mm). After a restyle, a wrap shop still measures the car because bumpers and trims may have changed.

Questions about wrapping a BYD Atto 3

How much vinyl does it take to wrap a BYD Atto 3?

A BYD Atto 3 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full color change wrap. For chrome or patterned film, the estimate is about 69 ft (21 m). These figures are for the newest body, the first generation, which has been produced from 2022 to now.

Can the roof of an Atto 3 be wrapped?

Yes, the roof of an Atto 3 can be wrapped if the car does not have the panoramic glass roof. On trims with the glass roof, the glass is not wrapped, and the film ends at the roof rails. If the car has roof rails, they come off before the roof is wrapped, or the film is cut along them.

Which years of the Atto 3 take the same film cuts?

All years of the Atto 3 first generation, from 2022 to now, take the same film cuts for the main body because the length is unchanged at 175.4 in (4,455 mm). The car was restyled in 2024 and 2026, so bumpers and trims may differ slightly. A wrap shop still measures before cutting because of those restyle changes.

Can I wrap only the hood or the roof of an Atto 3?

Yes, you can wrap only the hood or the roof of an Atto 3. A partial wrap can cover the hood, mirror caps, or roof on cars without the glass panel. A chrome delete covers the window trim and badges, and paint protection film (PPF) goes on the front end. These smaller jobs use less film than a full wrap.