Wraps by car

BYD Qin L EV wrap

The BYD Qin L EV wrap page covers the first and only generation of this compact sedan, produced from 2025. A full vinyl wrap on this car uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. This page explains the wrap process, film amounts, and smaller jobs for the Qin L EV.

1generations18 mof film for a full wrap

BYD Qin L EV, first generation, factory photo
BYD Qin L EV, first generation. Factory color shown.

BYD Qin L EV wrap colors and ideas

  • Qin L EV black wrap
  • Qin L EV white wrap
  • Qin L EV gray wrap
  • Qin L EV silver wrap
  • Qin L EV red wrap
  • Qin L EV blue wrap
  • Qin L EV green wrap
  • Qin L EV yellow wrap
  • Qin L EV orange wrap
  • Qin L EV purple wrap
  • Qin L EV pink wrap
  • Qin L EV teal wrap
  • Qin L EV brown wrap
  • Qin L EV gold wrap
  • Qin L EV chrome wrap
  • Qin L EV color shift wrap
  • Qin L EV carbon fiber wrap
  • Qin L EV camo and patterned wrap

How much vinyl to wrap a BYD Qin L EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowsedan (4 doors)185.8 in (4,720 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Qin L EV wrap cost factors

Qin L EV wrap cost depends on the film type, the size of the job, and the amount of disassembly needed. A full wrap on this 185.8 in (4,720 mm) sedan uses more material than a partial job on the hood or roof. Chrome delete and paint protection film are smaller jobs that add to the total if combined with a full wrap.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).

Qin L EV wraps by generation

Swipe sideways. Tap a card for the full description.

BYD Qin L EV, first generation, factory photo
Factory color shown

2025–now Qin L EV sedan (first generation)

2025–nowsedan (4 doors)185.8 in (4,720 mm)

The first generation BYD Qin L EV is a compact sedan that measures 185.8 in (4,720 mm) in length. The four-door body has standard panels like the front and rear bumpers, hood, roof, and trunk. The film estimate of about 59 ft (18 m) of 60-inch (1.52 m) cast film accounts for the sedan profile and typical waste.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Qin L EV

On the Qin L EV, a partial wrap can cover the roof, hood, or mirror caps as separate jobs. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BYD Qin L EV: body, cut-outs and film

The BYD Qin L EV vinyl wrap follows the four-door sedan body that measures 185.8 in (4,720 mm) long. The smooth sides and moderate panel count make film application straightforward for an experienced installer. The roof, hood, and trunk lid are large enough to be wrapped as single pieces without seams.

Qin L EV wrap ideas include a full color change, a partial wrap, or a chrome delete on the window trim and badges. The door handles and side mirrors come off for a clean edge, and the front and rear bumpers need cut-outs around sensors. The badges are removed and reapplied after the film is laid down.

When counting how much vinyl to wrap a Qin L EV, the first generation from 2025 is the only body to measure. The sedan size is consistent across all trims, so the film estimate does not change. The length of 185.8 in (4,720 mm) is the main factor that sets the 59 ft (18 m) figure.

Questions about wrapping a BYD Qin L EV

How much vinyl does it take to wrap a BYD Qin L EV?

A BYD Qin L EV takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. That figure is for the first generation sedan produced from 2025. Chrome or patterned film adds about 8 ft (2.5 m) due to pattern matching and waste.

Can I wrap only the hood or the roof of a Qin L EV?

Yes, you can wrap only the hood or the roof of a Qin L EV. These panels are listed as partial wrap options along with the mirror caps. A partial job uses less film and less labor than a full wrap.

Is a Qin L EV hard to wrap?

The Qin L EV is not a hard car to wrap, but it has a few points that add work. The front and rear bumpers have sensors that need cut-outs, and the badges come off for a clean finish. The 185.8 in (4,720 mm) length is average for a sedan, so no special handling is required.

How many generations of the Qin L EV does this page cover?

This page covers one generation of the BYD Qin L EV, produced from 2025. The catalog includes only the first generation because no other generation exists yet.