Wraps by car

BYD D1 wrap

The BYD D1 wrap page covers the single-generation BYD D1, a compact electric hatchback produced from 2020 onward. A full vinyl wrap of this car uses about 97 ft (29.5 m) of 60-inch (1.52 m) cast film. The same job with chrome or patterned film needs about 107 ft (32.5 m).

1generations29.5 mof film for a full wrap

BYD D1, first generation, factory photo
BYD D1, first generation. Factory color shown.

BYD D1 wrap colors and ideas

  • BYD D1 black wrap
  • BYD D1 white wrap
  • BYD D1 gray wrap
  • BYD D1 silver wrap
  • BYD D1 red wrap
  • BYD D1 blue wrap
  • BYD D1 green wrap
  • BYD D1 yellow wrap
  • BYD D1 orange wrap
  • BYD D1 purple wrap
  • BYD D1 pink wrap
  • BYD D1 teal wrap
  • BYD D1 brown wrap
  • BYD D1 gold wrap
  • BYD D1 chrome wrap
  • BYD D1 color shift wrap
  • BYD D1 carbon fiber wrap
  • BYD D1 camo and patterned wrap

How much vinyl to wrap a BYD D1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowhatchback (5 doors)172.8 in (4,390 mm)about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 107 ft (32.5 m)

BYD D1 wrap cost factors

BYD D1 wrap cost depends on the film type and the amount of material. A full wrap needs about 97 ft (29.5 m) of 60-inch cast film, while chrome or patterned film raises the requirement to about 107 ft (32.5 m). Labor changes with body details like the charge port door and the glass-in tailgate.

  • Film for a full wrap: about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 107 ft (32.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

BYD D1 wraps by generation

Swipe sideways. Tap a card for the full description.

BYD D1, first generation, factory photo
Factory color shown

2020–now BYD D1 hatchback (first generation)

2020–nowhatchback (5 doors)172.8 in (4,390 mm)

The first-generation BYD D1 is a compact five-door hatchback at 172.8 in (4,390 mm) long. Its size keeps panel count low and the roof easy to reach. The tailgate with the glass in it cuts film need around the rear window.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 97 ft (29.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 107 ft (32.5 m).

Roof, hood, chrome delete and PPF on a BYD D1

Partial wrap jobs on a BYD D1 include the roof, hood, and mirror caps. A BYD D1 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BYD D1: body, cut-outs and film

A BYD D1 vinyl wrap fits a five-door hatchback body that is 172.8 in (4,390 mm) long. This compact size means fewer panels and less material than a mid-size car. The upright rear end keeps the tailgate area straightforward for film layout.

BYD D1 wrap ideas include covering the charge port door as a small piece of its own. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Wrapping the door handles and mirrors can be done separately or as part of the main job.

To know how much vinyl to wrap a BYD D1, use 97 ft (29.5 m) of 60-inch film for a standard color change. If you choose chrome or patterned film, plan for about 107 ft (32.5 m). The car has one generation, so the figure stays the same for all 2020–now models.

Questions about wrapping a BYD D1

How much vinyl does it take to wrap a BYD D1?

It takes about 97 ft (29.5 m) of 60-inch (1.52 m) cast film to wrap a BYD D1. With chrome or patterned film, the figure rises to about 107 ft (32.5 m). These numbers come from the film estimate for the current hatchback body.

Can I wrap only the hood or the roof of a BYD D1?

Yes, you can wrap only the hood or the roof of a BYD D1. These panels are offered as a partial wrap along with mirror caps. A chrome delete on the window trim and badges is another smaller job.

Is a BYD D1 hard to wrap?

A BYD D1 is not especially hard to wrap, but two details add work. The charge port door must be wrapped as a small piece of its own. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

How many generations of the BYD D1 does this page cover?

This page covers one generation of the BYD D1. It is the first and only generation, produced from 2020 to now. All wrap figures refer to that body.