Wraps by car

BYD E6 wrap

The BYD E6 wrap page covers the first generation of this electric hatchback, produced from 2011 to now. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

BYD E6, first generation, factory photo
BYD E6, first generation. Factory color shown.

BYD E6 wrap colors and ideas

  • BYD E6 black wrap
  • BYD E6 white wrap
  • BYD E6 gray wrap
  • BYD E6 silver wrap
  • BYD E6 red wrap
  • BYD E6 blue wrap
  • BYD E6 green wrap
  • BYD E6 yellow wrap
  • BYD E6 orange wrap
  • BYD E6 purple wrap
  • BYD E6 pink wrap
  • BYD E6 teal wrap
  • BYD E6 brown wrap
  • BYD E6 gold wrap
  • BYD E6 chrome wrap
  • BYD E6 color shift wrap
  • BYD E6 carbon fiber wrap
  • BYD E6 camo and patterned wrap

How much vinyl to wrap a BYD E6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–nowhatchback (5 doors)179.3 in (4,554 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

BYD E6 wrap cost factors

BYD E6 wrap cost depends on the size of the car, the film type, and how much of the body is wrapped. The hatchback is 179.3 in (4,554 mm) long and needs about 61 ft (18.5 m) of cast film for a full wrap. Chrome or patterned film adds about 6 ft (1.8 m) to the film estimate, and cut-outs around the tailgate glass and charge port door add labor.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

BYD E6 wraps by generation

Swipe sideways. Tap a card for the full description.

BYD E6, first generation, factory photo
Factory color shown

2011–now BYD E6 hatchback (first generation)

2011–nowhatchback (5 doors)179.3 in (4,554 mm)

The first generation BYD E6 has been produced since 2011, so paint age varies from fresh to well weathered. A test spot on the paint shows whether the surface is sound enough for vinyl before a full wrap. Panels may be original or repainted, and a repainted panel can lift film if the paint was not cured properly.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a BYD E6

A BYD E6 partial wrap can cover the roof, hood, or mirror caps as a single accent. A chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BYD E6: body, cut-outs and film

The BYD E6 vinyl wrap starts with a compact hatchback body with five doors and a length of 179.3 in (4,554 mm). The film needs to follow the roof into the tailgate and wrap around the pillars cleanly. A single body style means the vinyl estimate stays the same for every trim of this generation.

The tailgate has the rear glass built into it, so the film ends at the edge of the glass rather than covering the whole panel. The charge port door is an electric car detail that gets wrapped as a small separate piece to keep the lines clean. BYD E6 wrap ideas often include a full color change with cut-outs around the glass and port.

To work out how much vinyl to wrap a BYD E6, compare the film estimates for the first generation. A plain color wrap needs about 61 ft (18.5 m) of 60-inch film, while chrome or patterned film needs about 67 ft (20.5 m). The extra film allows the installer to match pattern direction on panels.

Questions about wrapping a BYD E6

How much vinyl does it take to wrap a BYD E6?

A full wrap of a BYD E6 takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 67 ft (20.5 m). The estimate covers the first generation hatchback body.

Can I wrap only the hood or the roof of a BYD E6?

Yes, you can wrap only the hood or the roof of a BYD E6. Partial wrap jobs on this car include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges, and clear paint protection film goes on the front end.

Is a BYD E6 hard to wrap?

A BYD E6 has two details that add work for a wrapper. The tailgate has the rear glass in it, so the film ends at the edge of the glass instead of wrapping the whole panel. The electric charge port door needs to be wrapped as a small piece of its own, and the car is 179.3 in (4,554 mm) long, which adds surface area.

How many generations of the BYD E6 does this page cover?

This page covers one generation of the BYD E6, the first generation built from 2011 to now.