Wraps by car

BYD Dolphin wrap

The BYD Dolphin wrap page covers the subcompact hatchback from 2021 to the present, with one generation in the catalog. A full wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap. The page gives the film estimate, the body details that affect the job, and answers to common questions.

1generations16.5 mof film for a full wrap

BYD Dolphin, first generation, factory photo
BYD Dolphin, first generation. Factory color shown.

BYD Dolphin wrap colors and ideas

  • Dolphin black wrap
  • Dolphin white wrap
  • Dolphin gray wrap
  • Dolphin silver wrap
  • Dolphin red wrap
  • Dolphin blue wrap
  • Dolphin green wrap
  • Dolphin yellow wrap
  • Dolphin orange wrap
  • Dolphin purple wrap
  • Dolphin pink wrap
  • Dolphin teal wrap
  • Dolphin brown wrap
  • Dolphin gold wrap
  • Dolphin chrome wrap
  • Dolphin color shift wrap
  • Dolphin carbon fiber wrap
  • Dolphin camo and patterned wrap

How much vinyl to wrap a BYD Dolphin

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowhatchback (5 doors)160.2 in (4,070 mm) to 168.9 in (4,290 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Dolphin wrap cost factors

Dolphin wrap cost depends on the body size of 160.2 in (4,070 mm) to 168.9 in (4,290 mm) and the film estimate of about 54 ft (16.5 m). The amount of labor changes with the number of cutouts for parking sensors, cameras, and the charge port door. A panoramic glass roof is not wrapped, so the cost may be lower on those trims. The shop's hourly rate and film choice also affect the final cost.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2022: bumpers and lights differ between the versions, and so do the film cuts.

Dolphin wraps by generation

Swipe sideways. Tap a card for the full description.

BYD Dolphin, first generation, factory photo
Factory color shown

2021–now Dolphin hatchback (first generation)

2021–nowhatchback (5 doors)160.2 in (4,070 mm) to 168.9 in (4,290 mm)

The first generation BYD Dolphin has a panoramic glass roof on some trims that is not wrapped, so the roof stays dark whatever the color of the film. That reduces the amount of vinyl needed for a full wrap. The film ends at the roof rails, and the glass is left exposed. The roof rails themselves can be wrapped with the body panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Dolphin

A partial wrap on the Dolphin can cover the hood, mirror caps, and the roof on cars without the glass panel. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BYD Dolphin: body, cut-outs and film

The BYD Dolphin vinyl wrap depends on the hatchback body style and its length of 160.2 in (4,070 mm) to 168.9 in (4,290 mm). The five-door body has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a color change. These dimensions set the size of the panels and the amount of film to order.

Dolphin wrap ideas must account for the parking sensors in the bumpers on every trim, so the film is cut around each sensor. Every trim also has cameras in the body, and the film is cut around each lens. The charge port door is wrapped as a small piece of its own. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

How much vinyl to wrap a Dolphin stays the same because the catalog has one generation from 2021 to now. The body was restyled in 2022, but the wrap film estimate remains about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Some trims have a panoramic glass roof, which is not wrapped so it reduces the amount of film needed. The length changed from 160.2 in (4,070 mm) to 168.9 in (4,290 mm), but the panel count is the same.

Questions about wrapping a BYD Dolphin

How much vinyl does it take to wrap a BYD Dolphin?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a BYD Dolphin. That estimate covers the newest body with a standard color change wrap. A chrome or patterned film needs about 64 ft (19.5 m) because of the extra material for alignment.

Can the roof of a Dolphin be wrapped?

Yes, the roof of a Dolphin can be wrapped if the car does not have the panoramic glass roof. The glass roof itself is not wrapped, so the roof stays dark. On cars with the glass roof, the film ends at the roof rails.

Which years of the Dolphin take the same film cuts?

The 2021 to now BYD Dolphin generation takes the same film cuts, with the body restyled in 2022. The wrap film estimate is the same for all years in the catalog. The panel shapes may differ slightly after the restyle, but the overall amount of film is unchanged.

Can I wrap only the hood or the roof of a Dolphin?

Yes, you can wrap only the hood or the roof of a Dolphin with a partial wrap. The hood and mirror caps are common partial wrap choices. The roof can be wrapped on cars without the glass panel. A chrome delete and paint protection film are other partial options.