Wraps by car

Byvin BD132J wrap

This page covers the Byvin BD132J wrap in one generation, built from 2011 to 2016. The car is a three-door hatchback with a mini body, measuring 90.6 in (2,300 mm) long. A full vinyl wrap of this body takes about 33 ft (10 m) of 60-inch (1.52 m) cast film.

1generations10 mof film for a full wrap

Byvin BD132J, first generation, factory photo
Byvin BD132J, first generation. Factory color shown.

Byvin BD132J wrap colors and ideas

  • Byvin BD132J black wrap
  • Byvin BD132J white wrap
  • Byvin BD132J gray wrap
  • Byvin BD132J silver wrap
  • Byvin BD132J red wrap
  • Byvin BD132J blue wrap
  • Byvin BD132J green wrap
  • Byvin BD132J yellow wrap
  • Byvin BD132J orange wrap
  • Byvin BD132J purple wrap
  • Byvin BD132J pink wrap
  • Byvin BD132J teal wrap
  • Byvin BD132J brown wrap
  • Byvin BD132J gold wrap
  • Byvin BD132J chrome wrap
  • Byvin BD132J color shift wrap
  • Byvin BD132J carbon fiber wrap
  • Byvin BD132J camo and patterned wrap

How much vinyl to wrap a Byvin BD132J

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2016hatchback (3 doors)90.6 in (2,300 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m)

Byvin BD132J wrap cost factors

The Byvin BD132J wrap cost depends on film type and the size of the body. A standard color change needs about 33 ft (10 m) of 60-inch (1.52 m) cast film, while chrome or patterned film runs about 39 ft (12 m). The car's age, from 2011 to 2016, may mean some panels need extra prep. Wrap shops set their own rates for labor and film.

  • Film for a full wrap: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Byvin BD132J wraps by generation

Swipe sideways. Tap a card for the full description.

Byvin BD132J, first generation, factory photo
Factory color shown

2011–2016 Byvin BD132J hatchback (first generation)

2011–2016hatchback (3 doors)90.6 in (2,300 mm)

The first generation of the Byvin BD132J was built from 2011 to 2016 as a three-door hatchback. Cars of these years may have panels that are original or repainted, so a test spot comes before a full wrap. The compact body is 90.6 in (2,300 mm) long and needs about 33 ft (10 m) of film. Long side doors and a small tailgate keep the wrap straightforward.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 39 ft (12 m).

Roof, hood, chrome delete and PPF on a Byvin BD132J

A partial wrap on the Byvin BD132J covers select panels instead of the whole car. The roof, hood, and mirror caps are typical pieces for a color change. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Byvin BD132J: body, cut-outs and film

The Byvin BD132J vinyl wrap is shaped by its compact three-door hatchback body. The car is only 90.6 in (2,300 mm) long, so the roof and rear panels are short. Two long side doors mean each door uses one large piece of film. A tailgate with the rear glass in it keeps the rear wrap simple.

Byvin BD132J wrap ideas start with the small details. The electric charge port door is wrapped as a small piece of its own. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Each long side door becomes one large piece of film, which reduces visible seams.

To estimate how much vinyl to wrap a Byvin BD132J, the single generation keeps the numbers simple. The body is 90.6 in (2,300 mm) long, and the hatchback shape has no separate trunk. A full wrap takes about 33 ft (10 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan about 39 ft (12 m).

More Byvin wraps

Questions about wrapping a Byvin BD132J

How much vinyl does it take to wrap a Byvin BD132J?

It takes about 33 ft (10 m) of 60-inch (1.52 m) cast film to wrap a Byvin BD132J. This figure covers the three-door hatchback body of 90.6 in (2,300 mm) in length. For chrome or patterned film, a full wrap needs about 39 ft (12 m).

Can I wrap only the hood or the roof of a Byvin BD132J?

Yes, you can wrap only the hood or the roof of a Byvin BD132J. A partial wrap on this car often includes the roof, hood, and mirror caps. The small panels of the three-door hatchback make individual pieces manageable.

Is a Byvin BD132J hard to wrap?

A Byvin BD132J is not hard to wrap, but a few details add work. The tailgate has the rear glass in it, so the film must be trimmed to the edge of the glass. The electric charge port door is wrapped as a small piece of its own. The two long side doors each need one large piece of film, which takes care to apply without wrinkles.

How many generations of the Byvin BD132J does this page cover?

This page covers one generation of the Byvin BD132J. The car was produced from 2011 to 2016 as a three-door hatchback. All wrap figures on this page refer to that single generation.