Wraps by car

Byvin BD326J wrap

The Byvin BD326J wrap page covers this small electric hatchback from its first generation, produced from 2011 to 2016. A full vinyl wrap of the newest body takes about 33 ft (10 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 41 ft (12.5 m). The catalog shows the body styles, sizes, and wrap details for this single generation.

1generations10 mof film for a full wrap

Byvin BD326J, first generation, factory photo
Byvin BD326J, first generation. Factory color shown.

Byvin BD326J wrap colors and ideas

  • Byvin BD326J black wrap
  • Byvin BD326J white wrap
  • Byvin BD326J gray wrap
  • Byvin BD326J silver wrap
  • Byvin BD326J red wrap
  • Byvin BD326J blue wrap
  • Byvin BD326J green wrap
  • Byvin BD326J yellow wrap
  • Byvin BD326J orange wrap
  • Byvin BD326J purple wrap
  • Byvin BD326J pink wrap
  • Byvin BD326J teal wrap
  • Byvin BD326J brown wrap
  • Byvin BD326J gold wrap
  • Byvin BD326J chrome wrap
  • Byvin BD326J color shift wrap
  • Byvin BD326J carbon fiber wrap
  • Byvin BD326J camo and patterned wrap

How much vinyl to wrap a Byvin BD326J

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2016hatchback (3 doors)100.8 in (2,560 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)

Byvin BD326J wrap cost factors

The Byvin BD326J wrap cost depends mainly on the film type you choose, because the car is small and has a simple three-door hatchback body. A basic color change wrap needs about 33 ft (10 m) of 60-inch (1.52 m) cast film, while chrome or patterned film requires about 41 ft (12.5 m). Labor also changes with the number of cut-outs, the condition of the paint, and whether you choose partial coverage or a full wrap.

  • Film for a full wrap: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Byvin BD326J wraps by generation

Swipe sideways. Tap a card for the full description.

Byvin BD326J, first generation, factory photo
Factory color shown

2011–2016 Byvin BD326J hatchback (first generation)

2011–2016hatchback (3 doors)100.8 in (2,560 mm)

The first generation Byvin BD326J was produced from 2011 to 2016, and paint age matters for a wrap on a car of these years. Panels may be original or repainted, and a test spot comes before a full wrap to check that the film adheres and removes safely. Older, sun-damaged clear coat can lift when film is repositioned, so the surface must be inspected. The body is a three-door hatchback with a length of 100.8 in (2,560 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Roof, hood, chrome delete and PPF on a Byvin BD326J

A partial wrap on the Byvin BD326J can cover the roof, hood, and mirror caps instead of the whole body. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These jobs use less material than a full wrap and still change the look of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Byvin BD326J: body, cut-outs and film

A Byvin BD326J vinyl wrap is made simpler by the car's compact hatchback body and short overall length of 100.8 in (2,560 mm). The three-door design means only two side doors to cover, and the tall roof and large tailgate are the main flat areas. The 60-inch (1.52 m) film width suits the panel sizes well, reducing seams. Installers usually wrap the roof and hood as single pieces, then work around the curved rear corners.

Common Byvin BD326J wrap ideas must account for the tailgate with the rear glass in it, where the film ends at the edge of the glass. The two long side doors are each one large piece of film, so a second person helps with alignment. As an electric car, the charge port door is wrapped as a small piece of its own and can be left open during installation. Badges and the small grille are removed or cut around, depending on the design.

When counting how much vinyl to wrap a Byvin BD326J, there is only one generation but still differences between individual cars. The body was built from 2011 to 2016, and the shape remained the same, so the same film estimate applies. Some cars may have been repainted, but the panel sizes do not change. Extra film is always useful for mistakes, door shuts, and the charge port door.

More Byvin wraps

Questions about wrapping a Byvin BD326J

How much vinyl does it take to wrap a Byvin BD326J?

It takes about 33 ft (10 m) of 60-inch (1.52 m) cast film to wrap a Byvin BD326J in a standard color. For chrome or patterned film, the estimate is about 41 ft (12.5 m). These figures come from the film estimate for the newest body, which is also the only generation.

Can I wrap only the hood or the roof of a Byvin BD326J?

Yes, you can wrap only the hood or the roof of a Byvin BD326J. A partial wrap can cover the roof, hood, and mirror caps as separate jobs. For example, the roof alone is a common way to change the car's look without a full wrap.

Is a Byvin BD326J hard to wrap?

A Byvin BD326J is not hard to wrap because of its compact size and simple three-door shape. The tailgate with the rear glass in it means the film ends at the edge of the glass, which adds a clean cut line. The two long side doors are each one large piece of film, so a second installer is helpful. The charge port door is a small extra piece, but the overall length of 100.8 in (2,560 mm) keeps the job straightforward.

How many generations of the Byvin BD326J does this page cover?

This page covers one generation of the Byvin BD326J. The catalog lists only the first generation, produced from 2011 to 2016. No other generations are shown.