Wraps by car

Chery FX EV wrap

The Chery FX EV is a five-door electric SUV with one generation in production since 2022. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Owners who choose chrome or patterned film should allow about 67 ft (20.5 m).

1generations18 mof film for a full wrap

Chery FX EV, first generation, factory photo
Chery FX EV, first generation. Factory color shown.

Chery FX EV wrap colors and ideas

  • FX EV black wrap
  • FX EV white wrap
  • FX EV gray wrap
  • FX EV silver wrap
  • FX EV red wrap
  • FX EV blue wrap
  • FX EV green wrap
  • FX EV yellow wrap
  • FX EV orange wrap
  • FX EV purple wrap
  • FX EV pink wrap
  • FX EV teal wrap
  • FX EV brown wrap
  • FX EV gold wrap
  • FX EV chrome wrap
  • FX EV color shift wrap
  • FX EV carbon fiber wrap
  • FX EV camo and patterned wrap

How much vinyl to wrap a Chery FX EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)174.2 in (4,424 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

FX EV wrap cost factors

FX EV wrap cost depends on the area of film, the film type, and how many parts the installer removes. The body is 174.2 in (4,424 mm) long, and a plain wrap takes about 59 ft (18 m) of 60-inch (1.52 m) film. Chrome or patterned film uses about 67 ft (20.5 m), which changes the material cost. The tailgate glass, sensors, cameras, and roof rails all add cutting time to the job.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has a rear spoiler: it is wrapped as a piece of its own.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

FX EV wraps by generation

Swipe sideways. Tap a card for the full description.

Chery FX EV, first generation, factory photo
Factory color shown

2022–now FX EV SUV (first generation)

2022–nowSUV (5 doors)174.2 in (4,424 mm)

The first generation Chery FX EV from 2022 onward can have a two-tone body from the factory. The wrap either keeps the second color of the roof or covers it completely. If the owner keeps the split, the installer masks the line and wraps only one section. Covering the second color takes a little more film and labor.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has a rear spoiler: it is wrapped as a piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an FX EV

The FX EV can be partially wrapped in several ways, including a roof, hood, mirror caps, or rear spoiler wrap. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done on their own.

  • Partial wrap: roof, hood, mirror caps, rear spoiler.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chery FX EV: body, cut-outs and film

A Chery FX EV vinyl wrap covers a body that is 174.2 in (4,424 mm) long. The five-door SUV shape means the tailgate and all four doors are wrapped as separate panels. The roof is large enough that a color change wrap uses a noticeable share of the film. The rear spoiler and roof rails add small panels that are cut and wrapped on their own.

FX EV wrap ideas include cut-outs for the tailgate glass, parking sensors, and cameras. Every trim has roof rails that either come off before the roof is wrapped or are cut along their edges. Some trims have a sunroof, and the roof film is cut around its opening. The charge port door is wrapped as a small piece of its own because this is an electric car.

How much vinyl to wrap an FX EV depends on the film and the trim, but one generation makes counting simple. A plain cast film takes about 59 ft (18 m) on any FX EV from 2022 onward. Chrome or patterned film adds about 8 ft (2.5 m) because matching the pattern takes extra material. The body has not changed size since the first FX EV, so the same estimate covers every year.

Questions about wrapping a Chery FX EV

How much vinyl does it take to wrap a Chery FX EV?

A full wrap of a Chery FX EV takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. If the film is chrome or patterned, the estimate rises to about 67 ft (20.5 m). These figures cover the whole exterior of the newest body.

Can the roof of an FX EV be wrapped?

Yes, the roof of an FX EV can be wrapped. Roof rails are removed or cut around, and a sunroof opening is trimmed out if the trim has one. Some two-tone trims keep the factory roof color as part of the design.

Can I wrap only the hood or the roof of an FX EV?

Yes, you can wrap only the hood or the roof of an FX EV. The partial wrap options include the roof, hood, mirror caps, and rear spoiler. These are separate panels that can be done in any combination.

Is an FX EV hard to wrap?

Yes, an FX EV has a few details that add work for the installer. The tailgate glass, parking sensors, cameras, and charge port door all need cut-outs. Roof rails and a sunroof on some trims also add time, but the body size is manageable at 174.2 in (4,424 mm) long.