Wraps by car

Chery Tiggo 4 Pro wrap

This page covers the Chery Tiggo 4 Pro wrap from the first generation produced between 2022 and now. A full vinyl wrap of this five-door SUV takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 66 ft (20 m) because the pattern must be matched.

1generations18 mof film for a full wrap

Chery Tiggo 4 Pro, first generation, factory photo
Chery Tiggo 4 Pro, first generation. Factory color shown.

Chery Tiggo 4 Pro wrap colors and ideas

  • Tiggo 4 Pro black wrap
  • Tiggo 4 Pro white wrap
  • Tiggo 4 Pro gray wrap
  • Tiggo 4 Pro silver wrap
  • Tiggo 4 Pro red wrap
  • Tiggo 4 Pro blue wrap
  • Tiggo 4 Pro green wrap
  • Tiggo 4 Pro yellow wrap
  • Tiggo 4 Pro orange wrap
  • Tiggo 4 Pro purple wrap
  • Tiggo 4 Pro pink wrap
  • Tiggo 4 Pro teal wrap
  • Tiggo 4 Pro brown wrap
  • Tiggo 4 Pro gold wrap
  • Tiggo 4 Pro chrome wrap
  • Tiggo 4 Pro color shift wrap
  • Tiggo 4 Pro carbon fiber wrap
  • Tiggo 4 Pro camo and patterned wrap

How much vinyl to wrap a Chery Tiggo 4 Pro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)170.0 in (4,318 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Tiggo 4 Pro wrap cost factors

Tiggo 4 Pro wrap cost depends most on the film type, with cast film taking about 59 ft (18 m) and chrome or patterned film about 66 ft (20 m). The labor is driven by the roof details because every trim has a sunroof, roof rails, and often a two-tone roof. Removing the roof rails before wrapping the roof adds time, and cutting around the sunroof opening adds care.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Tiggo 4 Pro wraps by generation

Swipe sideways. Tap a card for the full description.

Chery Tiggo 4 Pro, first generation, factory photo
Factory color shown

2022–now Tiggo 4 Pro SUV (first generation)

2022–nowSUV (5 doors)170.0 in (4,318 mm)

The first generation Chery Tiggo 4 Pro from 2022 to now has a two-tone body from the factory on some trims. The wrap either keeps the second color of the roof or covers it with the new film. Keeping the split means the roof film starts at the color break line, while covering it uses a little more film from the 59 ft (18 m) estimate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Tiggo 4 Pro

The Tiggo 4 Pro works well for a partial wrap of the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard the painted surfaces.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chery Tiggo 4 Pro: body, cut-outs and film

The Chery Tiggo 4 Pro vinyl wrap has one SUV body with five doors and a length of 170.0 in (4,318 mm). The size means an installer uses the full width of a 60-inch (1.52 m) roll on the roof and hood with little waste. The tall sides and rear bumper are cut from separate pieces joined at the panel edges.

Tiggo 4 Pro wrap ideas start with the tailgate where the rear glass sits inside the panel, so the film ends at the edge of the glass. Every trim has a sunroof and the roof film is cut around its opening. Every trim also has roof rails that come off before the roof is wrapped, or the film is cut along them.

If you want to know how much vinyl to wrap a Tiggo 4 Pro there is only one generation from 2022 to now in the catalog. The body length is the same at 170.0 in (4,318 mm) for the whole run, so the film estimate stays the same. Factory two-tone trims may need extra film only if the owner wants to cover the second roof color.

Questions about wrapping a Chery Tiggo 4 Pro

How much vinyl does it take to wrap a Chery Tiggo 4 Pro?

A Chery Tiggo 4 Pro needs about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. That figure is for the first generation body from 2022 to now. If the film is chrome or patterned the amount rises to about 66 ft (20 m) to match the pattern.

Can the roof of a Tiggo 4 Pro be wrapped?

Yes, the roof of a Tiggo 4 Pro can be wrapped. Every trim has roof rails that are removed first or the film is cut along them. If the car has a two-tone body the wrap can keep the second roof color or cover it.

Can I wrap only the hood or the roof of a Tiggo 4 Pro?

Yes, you can wrap only the hood or the roof of a Tiggo 4 Pro. A partial wrap of the roof, hood, and mirror caps is a smaller job than a full wrap. The roof film is cut around the sunroof opening on every trim.

Is a Tiggo 4 Pro hard to wrap?

A Tiggo 4 Pro is not especially hard to wrap but it has details that add work. The tailgate has the rear glass inside the panel so the film must end at the edge of the glass. Every trim has a sunroof, roof rails, parking sensors, cameras, and fog lamps that need cut-outs or removal.