A color change wrap on the FX EV is an add-on layer over the factory paint, so the original color stays intact underneath. Choose the finish first, because matte, satin and gloss teal read very differently on this SUV's large panels. Then pick a film line for its exact shade and texture, and decide between a full wrap or partial panels like the roof and hood. The tailgate, roof rails and sensors all add small cuts that a careful installer plans from the start.
The factory paint on the FX EV can be two-tone on some trims, with a second color roof that a wrap can keep or cover. Seams are placed along panel edges, and on this SUV the tailgate glass edge and roof rail bases give natural stopping points. The rear spoiler is wrapped as its own piece, so the film tucks cleanly around its edges without pulling. Parking sensors and cameras in the bumpers mean the film is cut around each opening, not over it.
The teal wrap is removable, so the FX EV can go back to its original paint later when you want a change. Hand wash the wrapped car with mild soap and a soft mitt, and avoid automated brushes that can lift an edge. Dirt along the edges of the tailgate and around the roof rails is the main thing to rinse off. A removable film does not mean it peels by itself, but it does come off with heat and time from an installer.