A Pacifica wrapped in orange starts with choosing the finish for the color change. Matte and satin films make the minivan look flat and calm, while gloss films give it a shiny, paint-like shine. The newest body from 2016 has sliding side doors, so the film on each side is cut along the bare door tracks. For a first generation from 2003–2007, the tailgate film ends at the edge of the rear glass.

The factory paint on the Pacifica must be clean and smooth before the wrap film goes on. The newest body from 2016 has parking sensors and cameras, so the installer cuts the film around each sensor and lens. The wrap will have seams where the film panels meet, and these seams follow the body lines of the van. On every trim with roof rails, the rails come off before the roof is wrapped or the film is cut along them.

An orange wrap on the Pacifica is removable with heat and the right tools. The installer can remove it without leaving adhesive on the factory paint when the paint was in good condition. The wrap needs hand washing with a soft sponge and a mild cleaner after the job. The plug-in and electric versions have a charge port door that is wrapped as a small piece of its own.