Wraps by car

Cupra Ateca wrap

The Cupra Ateca wrap page covers this compact SUV from 2018 to the present in one generation. A full vinyl wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Photos of finished cars and the list of cut-outs help you plan the job.

1generations18 mof film for a full wrap

Cupra Ateca, first generation, factory photo
Cupra Ateca, first generation. Factory color shown.

Cupra Ateca wrap colors and ideas

  • Ateca black wrap
  • Ateca white wrap
  • Ateca gray wrap
  • Ateca silver wrap
  • Ateca red wrap
  • Ateca blue wrap
  • Ateca green wrap
  • Ateca yellow wrap
  • Ateca orange wrap
  • Ateca purple wrap
  • Ateca pink wrap
  • Ateca teal wrap
  • Ateca brown wrap
  • Ateca gold wrap
  • Ateca chrome wrap
  • Ateca color shift wrap
  • Ateca carbon fiber wrap
  • Ateca camo and patterned wrap

How much vinyl to wrap a Cupra Ateca

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowSUV (5 doors)172.7 in (4,386 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Ateca wrap cost factors

Ateca wrap cost depends on the size of the job and the film you choose, not on a fixed price. A full color change uses about 59 ft (18 m) of 60-inch (1.52 m) cast film or about 67 ft (20.5 m) of chrome or patterned film. Extra cut-outs for sensors, cameras, and the sunroof add labor time.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2020: bumpers and lights differ between the versions, and so do the film cuts.

Ateca wraps by generation

Swipe sideways. Tap a card for the full description.

Cupra Ateca, first generation, factory photo
Factory color shown

2018–now Ateca SUV (first generation)

2018–nowSUV (5 doors)172.7 in (4,386 mm)

The first generation Cupra Ateca ran from 2018 to now with a restyling in 2020. The 2020 change altered the bumpers and lights, so film cut for one version does not fit the other. A wrapper measures the front and rear ends before cutting any pre-cut kit.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an Ateca

A partial wrap on the Cupra Ateca can cover just the roof, hood, or mirror caps. An Ateca chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cupra Ateca: body, cut-outs and film

The Cupra Ateca vinyl wrap has to cover a five-door SUV body 172.7 in (4,386 mm) long. The tall roof and large tailgate use more film than a sedan but the flat sides are easy to work on. A full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

Ateca wrap ideas start with the parts that need cut-outs: the sunroof, parking sensors, cameras, and fog lamps. The roof rails come off before the roof is wrapped or the film is cut along them. The tailgate film ends at the edge of the rear glass.

How much vinyl to wrap an Ateca stays at about 59 ft (18 m) of 60-inch (1.52 m) film for this one generation. The 2020 restyling changed the bumpers and lights, so pre-cut film from before does not fit the later cars. You measure the same body length of 172.7 in (4,386 mm) either way.

Questions about wrapping a Cupra Ateca

How much vinyl does it take to wrap a Cupra Ateca?

A Cupra Ateca takes about 59 ft (18 m) of 60-inch (1.52 m) vinyl for a full wrap. If you choose chrome or patterned film, plan for about 67 ft (20.5 m). The estimate covers the newest body style of this five-door SUV.

Can the roof of an Ateca be wrapped?

Yes, the roof of an Ateca can be wrapped on its own or as part of a full wrap. Every trim has a sunroof, so the film is cut around its opening. Some trims have roof rails that come off before the roof is wrapped or the film is cut along them.

Which years of the Ateca take the same film cuts?

The Cupra Ateca has one generation from 2018 to now, so most body panels are the same. The 2020 restyling changed the bumpers and lights, so those parts need different film cuts before and after 2020.

Can I wrap only the hood or the roof of an Ateca?

Yes, you can wrap only the hood or the roof of an Ateca. A partial wrap can also cover the mirror caps. A chrome delete covers the window trim and badges, and clear paint protection film (PPF) goes on the front end.