Wraps by car

Cupra Formentor wrap

The Cupra Formentor wrap page covers the first generation SUV produced from 2020 onward. A full vinyl wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 67 ft (20.5 m). This guide explains what a wrap on this car involves.

1generations18.5 mof film for a full wrap

Cupra Formentor, first generation, factory photo
Cupra Formentor, first generation. Factory color shown.

Cupra Formentor wrap colors and ideas

  • Formentor black wrap
  • Formentor white wrap
  • Formentor gray wrap
  • Formentor silver wrap
  • Formentor red wrap
  • Formentor blue wrap
  • Formentor green wrap
  • Formentor yellow wrap
  • Formentor orange wrap
  • Formentor purple wrap
  • Formentor pink wrap
  • Formentor teal wrap
  • Formentor brown wrap
  • Formentor gold wrap
  • Formentor chrome wrap
  • Formentor color shift wrap
  • Formentor carbon fiber wrap
  • Formentor camo and patterned wrap

How much vinyl to wrap a Cupra Formentor

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)175.2 in (4,450 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Formentor wrap cost factors

Formentor wrap cost depends on the film type, the number of panels, and the labor for the car's details. A full wrap uses about 61 ft (18.5 m) of cast film, while chrome or patterned film needs about 67 ft (20.5 m). Work on sensors, cameras, fog lamps, and the tailgate glass adds time for cutting and fitting. Removing the roof rails also adds to the labor.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Formentor wraps by generation

Swipe sideways. Tap a card for the full description.

Cupra Formentor, first generation, factory photo
Factory color shown

2020–now Formentor SUV (first generation)

2020–nowSUV (5 doors)175.2 in (4,450 mm)

The first generation Cupra Formentor runs from 2020 to now and was restyled in 2024. That restyling changed the bumpers and lights, so film cut for one version does not fit the other. The body length stays at 175.2 in (4,450 mm) for all years. Installers keep separate patterns for pre-2024 and post-2024 cars.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Formentor

A partial wrap on a Formentor covers the roof, hood, or mirror caps as separate jobs. Formentor chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as clear film on the front end. These options wrap only the parts you choose instead of the whole body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Cupra Formentor: body, cut-outs and film

The Cupra Formentor vinyl wrap is sized around a five-door SUV body measuring 175.2 in (4,450 mm) long. Its length and high roofline mean more film than a small hatchback but less than a large van. The tailgate includes the rear glass, so the film ends at the edge of the glass. The roof rails on every trim must come off before wrapping the roof or the film is cut along them.

Formentor wrap ideas start with the parts that need extra work. Every trim has parking sensors in the bumpers and cameras in the body, so the film is cut around each sensor and lens. The front bumper also has fog lamps that require cut-outs in the film. Plug-in and electric versions have a charge port door wrapped as a small piece of its own.

How much vinyl to wrap a Formentor stays the same across the first generation from 2020 to now. The body was restyled in 2024 with new bumpers and lights, so film cut for one version does not fit the other. The overall panel sizes did not change enough to alter the total film needed. Anyone counting film uses the same estimate for all years.

Questions about wrapping a Cupra Formentor

How much vinyl does it take to wrap a Cupra Formentor?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Cupra Formentor. Chrome or patterned film raises the amount to about 67 ft (20.5 m). This estimate covers the full body including the tailgate with the rear glass in it.

Which years of the Formentor take the same film cuts?

The Formentor years from 2020 to 2023 take the same film cuts, and the 2024 and later years take the same cuts. The 2024 restyling changed the bumpers and lights, so pre-2024 film does not fit post-2024 cars. Within each of those two groups the cuts are the same.

Can I wrap only the hood or the roof of a Formentor?

Yes, you can wrap only the hood or the roof of a Formentor. A partial wrap covers the roof, hood, or mirror caps as separate jobs. For the roof, the roof rails need to come off or the film is cut along them.

Is a Formentor hard to wrap?

A Formentor is not hard to wrap but it has details that add work. The tailgate includes the rear glass, so the film ends at the edge of the glass. Every trim has roof rails, parking sensors, cameras, and fog lamps that require cuts or removal. The body length of 175.2 in (4,450 mm) is typical for an SUV.