Wraps by car

Dacia 1410 wrap

The Dacia 1410 wrap page covers the single generation produced from 1984 to 2004, a compact coupe with two doors. A full vinyl wrap of this body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 57 ft (17.5 m).

1generations14 mof film for a full wrap

Dacia 1410, first generation, factory photo
Dacia 1410, first generation. Factory color shown.

Dacia 1410 wrap colors and ideas

  • Dacia 1410 black wrap
  • Dacia 1410 white wrap
  • Dacia 1410 gray wrap
  • Dacia 1410 silver wrap
  • Dacia 1410 red wrap
  • Dacia 1410 blue wrap
  • Dacia 1410 green wrap
  • Dacia 1410 yellow wrap
  • Dacia 1410 orange wrap
  • Dacia 1410 purple wrap
  • Dacia 1410 pink wrap
  • Dacia 1410 teal wrap
  • Dacia 1410 brown wrap
  • Dacia 1410 gold wrap
  • Dacia 1410 chrome wrap
  • Dacia 1410 color shift wrap
  • Dacia 1410 carbon fiber wrap
  • Dacia 1410 camo and patterned wrap

How much vinyl to wrap a Dacia 1410

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–2004coupe (2 doors)170.9 in (4,340 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Dacia 1410 wrap cost factors

The Dacia 1410 wrap cost depends on the amount of film the coupe body uses and the condition of the paint on a car from 1984 to 2004. A full wrap needs about 46 ft (14 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) for chrome or patterned film. Labor varies with the two long side doors, which each take one large piece of film. No price is set here because the site is an international guide, not a shop.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Dacia 1410 wraps by generation

Swipe sideways. Tap a card for the full description.

Dacia 1410, first generation, factory photo
Factory color shown

1984–2004 Dacia 1410 coupe (first generation)

1984–2004coupe (2 doors)170.9 in (4,340 mm)

The first generation Dacia 1410, built from 1984 to 2004, is a compact coupe with two long side doors. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A full wrap of this body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film, or about 57 ft (17.5 m) for chrome or patterned film.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Dacia 1410

A partial wrap on a Dacia 1410 covers the roof, hood or mirror caps with vinyl film. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dacia 1410: body, cut-outs and film

The Dacia 1410 vinyl wrap job is shaped by its two-door coupe body measuring 170.9 in (4,340 mm) in length. The long side doors each take one large piece of film, which simplifies a full color change wrap. The compact size keeps the total amount of film low compared with larger cars.

Dacia 1410 wrap ideas start with the long side doors, which are each covered with one large piece of film. The coupe body has no door handles to remove, so cut-outs stay limited. Mirrors, badges and window trim are the main areas where film is trimmed or parts come off.

To know how much vinyl to wrap a Dacia 1410, use the film estimate for the newest body of the single generation. For a standard color change wrap that is about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the figure to about 57 ft (17.5 m).

Questions about wrapping a Dacia 1410

How much vinyl does it take to wrap a Dacia 1410?

Yes, a Dacia 1410 needs about 46 ft (14 m) of 60-inch (1.52 m) cast vinyl for a full wrap. That is the estimate for the newest body of the single generation. Chrome or patterned film takes about 57 ft (17.5 m).

Can I wrap only the hood or the roof of a Dacia 1410?

Yes, you can wrap only the hood or the roof of a Dacia 1410. A partial wrap also covers mirror caps, and chrome delete handles window trim and badges. Paint protection film (PPF) covers the front end with clear film.

Is a Dacia 1410 hard to wrap?

A Dacia 1410 is not hard to wrap because the two long side doors each take one large piece of film. The compact body, 170.9 in (4,340 mm) long, uses a modest amount of film. The main extra work is paint condition: panels from 1984 to 2004 may be original or repainted, so a test spot comes before a full wrap.

How many generations of the Dacia 1410 does this page cover?

This page covers one generation of the Dacia 1410, produced from 1984 to 2004. It is a compact coupe with two long side doors. A full wrap of that body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film.