Wraps by car

Dacia Solenza wrap

The Dacia Solenza wrap page covers the single generation of the Solenza, produced from 2003 to 2005. A full vinyl wrap of its liftback body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 59 ft (18 m).

1generations14.5 mof film for a full wrap

Dacia Solenza, first generation, factory photo
Dacia Solenza, first generation. Factory color shown.

Dacia Solenza wrap colors and ideas

  • Solenza black wrap
  • Solenza white wrap
  • Solenza gray wrap
  • Solenza silver wrap
  • Solenza red wrap
  • Solenza blue wrap
  • Solenza green wrap
  • Solenza yellow wrap
  • Solenza orange wrap
  • Solenza purple wrap
  • Solenza pink wrap
  • Solenza teal wrap
  • Solenza brown wrap
  • Solenza gold wrap
  • Solenza chrome wrap
  • Solenza color shift wrap
  • Solenza carbon fiber wrap
  • Solenza camo and patterned wrap

How much vinyl to wrap a Dacia Solenza

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2005liftback (5 doors)160.6 in (4,080 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Solenza wrap cost factors

Solenza wrap cost depends on the film area, the film type, and the shop's labor. The car's small liftback body takes about 48 ft (14.5 m) of cast film, while chrome or patterned film needs about 59 ft (18 m). Paint condition also matters because panels of these years may be original or repainted.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Solenza wraps by generation

Swipe sideways. Tap a card for the full description.

Dacia Solenza, first generation, factory photo
Factory color shown

2003–2005 Solenza liftback (first generation)

2003–2005liftback (5 doors)160.6 in (4,080 mm)

Paint age is a factor on a first-generation Solenza from 2003 to 2005. Panels may be original or repainted after years of use. A test spot comes before a full wrap to check adhesion on each surface.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Solenza

A partial wrap on a Solenza can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end is another option.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dacia Solenza: body, cut-outs and film

The Dacia Solenza vinyl wrap fits a subcompact liftback with five doors and a length of 160.6 in (4,080 mm). Its small body and few flat panels keep film use modest. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

Solenza wrap ideas should account for the tailgate with its integrated rear glass. The film stops at the glass edge, leaving a clean line without a cut-out. Door handles, mirrors, and badges need removal or careful trimming for a smooth finish.

How much vinyl to wrap a Solenza stays the same across its single generation from 2003 to 2005. The body was not redesigned in those years. Anyone counting film for a full wrap uses the one estimate of about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Dacia Solenza

How much vinyl does it take to wrap a Dacia Solenza?

A full wrap of a Dacia Solenza takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 59 ft (18 m). The liftback body is a subcompact, so film use is modest.

Can I wrap only the hood or the roof of a Solenza?

Yes, you can wrap only the hood or the roof of a Solenza. A partial wrap on this car often covers the roof, hood, or mirror caps. Film is bought by the area needed, so small panels cost less material.

Is a Solenza hard to wrap?

Yes, a Solenza is somewhat hard to wrap because of its tailgate with the rear glass in it. The film must end at the edge of the glass, which takes careful cutting. The car's small size means fewer square feet, but the glass area adds time.

How many generations of the Solenza does this page cover?

This page covers one generation of the Solenza, produced from 2003 to 2005. The body is a liftback with five doors. No other generation exists.