Wraps by car

Eagle Summit wrap

The Eagle Summit wrap page covers every body style of the 1989–1996 compact car. This first generation includes coupe, hatchback, sedan, and van versions with two, three, or four doors. A full vinyl wrap of the newest body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film for the coupe. The van needs up to 62 ft (19 m), and chrome or patterned film can add up to about 72 ft (22 m).

1generations14 mof film for a full wrap

Eagle Summit, first generation, factory photo
Eagle Summit, first generation. Factory color shown.

Eagle Summit wrap colors and ideas

  • Summit black wrap
  • Summit white wrap
  • Summit gray wrap
  • Summit silver wrap
  • Summit red wrap
  • Summit blue wrap
  • Summit green wrap
  • Summit yellow wrap
  • Summit orange wrap
  • Summit purple wrap
  • Summit pink wrap
  • Summit teal wrap
  • Summit brown wrap
  • Summit gold wrap
  • Summit chrome wrap
  • Summit color shift wrap
  • Summit carbon fiber wrap
  • Summit camo and patterned wrap

How much vinyl to wrap an Eagle Summit

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1996coupe, hatchback, sedan, van (2 or 3 or 4 doors)158.7 in (4,031 mm) to 174.0 in (4,420 mm)about 46 ft (14 m) for the coupe to 62 ft (19 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Summit wrap cost factors

Summit wrap cost depends on the body style and the amount of film needed. The coupe uses about 46 ft (14 m), while the van takes up to 62 ft (19 m) of 60-inch cast film. A sedan or hatchback falls between those amounts, so material cost is lower than for the van. The cost also depends on custom work like chrome delete or paint protection film, which adds labor and material.

  • Film for a full wrap: about 46 ft (14 m) for the coupe to 62 ft (19 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: coupe, hatchback, sedan, van (2 or 3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Summit wraps by generation

Swipe sideways. Tap a card for the full description.

Eagle Summit, first generation, factory photo
Factory color shown

1989–1996 Summit coupe, hatchback, sedan, van (first generation)

1989–1996coupe, hatchback, sedan, van (2 or 3 or 4 doors)158.7 in (4,031 mm) to 174.0 in (4,420 mm)

The first generation Eagle Summit from 1989–1996 has sliding side doors on the van body. Those door tracks stay bare, and the film line is cut along them so the door can still open. The tracks also mean the installer must plan the panel seams around the sliding mechanism. This generation includes coupe, hatchback, sedan, and van styles, each with a different film estimate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 46 ft (14 m) for the coupe to 62 ft (19 m) for the van, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Summit

A partial wrap on an Eagle Summit can cover just the roof, hood, or mirror caps. Summit chrome delete covers window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film for the front end to guard against stone chips. These smaller jobs change the amount of film and labor compared to a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Eagle Summit: body, cut-outs and film

The Eagle Summit vinyl wrap depends on which body style and length you have. The car measures from 158.7 in (4,031 mm) for the short coupe to 174.0 in (4,420 mm) for the longer van and sedan. The coupe and hatchback use less film because they have less surface area and fewer doors. A van or sedan requires more material for the roof, pillars, and extra door skins.

Summit wrap ideas must account for the tailgate with rear glass in it. The film ends cleanly at the edge of that glass, so the installer trims along the rubber seal. On the van, the sliding side doors have tracks that stay bare and decide where the film is cut. Door handles, mirrors, and badges also come off or get cut around for a neat edge.

How much vinyl to wrap a Summit depends on the generation, but there is only one generation. Even within that generation, the body styles differ enough to change the film estimate. The coupe is the smallest, so it needs about 46 ft (14 m) of 60-inch film. The van is the largest and takes about 62 ft (19 m), while the sedan falls between those two figures.

Questions about wrapping an Eagle Summit

How much vinyl does it take to wrap an Eagle Summit?

It takes 46 to 62 ft (14 to 19 m) of 60-inch (1.52 m) cast film to wrap an Eagle Summit. The exact amount depends on the body style: the coupe is at the low end and the van at the high end. Chrome or patterned film adds material, up to about 72 ft (22 m).

Are the sliding doors of a Summit wrapped?

Yes, the sliding side doors are wrapped, but the tracks stay bare. The film is cut along the edge of the tracks so the doors open and close without hitting film. The rest of the door panel receives film up to that edge.

Which Summit body takes more film?

The van body takes more film than the coupe or hatchback. The van needs about 62 ft (19 m) of 60-inch film, while the coupe needs only about 46 ft (14 m). The sedan falls in between those two amounts.

Can I wrap only the hood or the roof of a Summit?

Yes, you can wrap only the hood or the roof of a Summit. A partial wrap can cover the hood, roof, or mirror caps. Chrome delete is another option for just the window trim and badges. Paint protection film on the front end is also a smaller job than a full wrap.