Wraps by car

Eagle Vista wrap

The Eagle Vista wrap is a vinyl wrap project for the 1988–1992 minivan. This catalog covers the sole generation of the Vista and its five-door van body. A full wrap of the Vista uses about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises that estimate to about 72 ft (22 m).

1generations19 mof film for a full wrap

Eagle Vista, first generation, factory photo
Eagle Vista, first generation. Factory color shown.

Eagle Vista wrap colors and ideas

  • Vista black wrap
  • Vista white wrap
  • Vista gray wrap
  • Vista silver wrap
  • Vista red wrap
  • Vista blue wrap
  • Vista green wrap
  • Vista yellow wrap
  • Vista orange wrap
  • Vista purple wrap
  • Vista pink wrap
  • Vista teal wrap
  • Vista brown wrap
  • Vista gold wrap
  • Vista chrome wrap
  • Vista color shift wrap
  • Vista carbon fiber wrap
  • Vista camo and patterned wrap

How much vinyl to wrap an Eagle Vista

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1988–1992van (5 doors)176.8 in (4,490 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Vista wrap cost factors

Vista wrap cost depends on the film type, the shop's labor rate, and how much of the van is covered. A full wrap uses about 62 ft (19 m) of cast film, and chrome or patterned film pushes that to 72 ft (22 m). The sliding door tracks require careful cutting, which can add labor time compared to a fixed-door van. Partial wraps and paint protection film use less material but still involve precise work around the door tracks.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Vista wraps by generation

Swipe sideways. Tap a card for the full description.

Eagle Vista, first generation, factory photo
Factory color shown

1988–1992 Vista van (first generation)

1988–1992van (5 doors)176.8 in (4,490 mm)

The first generation Eagle Vista (1988–1992) is the only body a wrapper will encounter. Its sliding side doors define the install: the tracks stay bare, and the film is cut along them. This single van style keeps film estimates consistent across every production year. No alternate bodies or facelifts exist for the Vista, so a template from one year fits all.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Vista

A partial wrap on an Eagle Vista covers the roof, hood, or mirror caps without the full 62 ft (19 m) of film. Vista chrome delete replaces bright window trim and badges with black vinyl for a color change wrap look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs suit the Vista's flat panels and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Eagle Vista: body, cut-outs and film

The Eagle Vista vinyl wrap is shaped by the vehicle's 176.8 in (4,490 mm) length and single body style. As a five-door van, the Vista has large flat side panels that simplify film application. The tall roofline and expansive rear hatch add surface area but remain straightforward to cover. Installers can work the side panels in sections without fighting complex curves.

Vista wrap ideas must account for the sliding side doors, whose tracks stay bare. The film is cut along the door tracks, and the glass on all five doors requires clean cut-outs. Door handles, mirrors, and badges come off for a neater edge and faster install. The front and rear bumpers wrap in place with relief cuts at the corners.

When calculating how much vinyl to wrap a Vista, the single generation keeps the math simple. Every 1988–1992 Vista shares the same van body, so film estimates do not change from year to year. Chrome or patterned film adds about 10 ft (3 m) due to pattern matching and overlap on the sliding doors. A first-time installer should order the full 72 ft (22 m) to allow for waste.

Questions about wrapping an Eagle Vista

How much vinyl does it take to wrap an Eagle Vista?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap an Eagle Vista. Chrome or patterned film raises the estimate to about 72 ft (22 m) because of pattern matching on the sliding doors. These figures cover the entire 1988–1992 van body including the roof and hatch.

Are the sliding doors of a Vista wrapped?

Yes, the sliding doors of a Vista are wrapped, but the door tracks stay bare. The vinyl is cut along the tracks so the doors can open and close without binding. This leaves the metal track exposed as a design line on each side.

Can I wrap only the hood or the roof of a Vista?

Yes, you can wrap only the hood or the roof of a Vista as a partial wrap. These panels are flat and use less film than a full wrap, so they are a practical first project. Mirror caps and a chrome delete on the window trim are other partial options for this van.

Is a Vista hard to wrap?

The Vista is not hard to wrap, but the sliding door tracks add one extra step. You must cut the film along the tracks and keep them clear, which takes care and a sharp blade. The van's 176.8 in (4,490 mm) length means more material to manage, but the flat sides make squeegeeing straightforward.