Wraps by car

Excalibur Series V wrap

The Excalibur Series V wrap page covers the 1985–1997 first generation, the only generation in this catalog. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) for the convertible or 69 ft (21 m) for the sedan. The film used is 60-inch (1.52 m) cast vinyl, with chrome or patterned film needing up to about 79 ft (24 m).

1generations16.5 mof film for a full wrap

Excalibur Series V, first generation, factory photo
Excalibur Series V, first generation. Factory color shown.

Excalibur Series V wrap colors and ideas

  • Series V black wrap
  • Series V white wrap
  • Series V gray wrap
  • Series V silver wrap
  • Series V red wrap
  • Series V blue wrap
  • Series V green wrap
  • Series V yellow wrap
  • Series V orange wrap
  • Series V purple wrap
  • Series V pink wrap
  • Series V teal wrap
  • Series V brown wrap
  • Series V gold wrap
  • Series V chrome wrap
  • Series V color shift wrap
  • Series V carbon fiber wrap
  • Series V camo and patterned wrap

How much vinyl to wrap an Excalibur Series V

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1997convertible, sedan (2 or 4 doors)204.0 in (5,182 mm) to 224.0 in (5,690 mm)about 54 ft (16.5 m) for the convertible to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m)

Series V wrap cost factors

Series V wrap cost depends on the body style and the film's finish. A longer sedan uses more material than the convertible, with estimates from 54 ft to 69 ft of 60-inch film. Chrome or patterned film can take up to about 79 ft, so it costs more in material. Labour also changes with the amount of cut-outs and the car's curves.

  • Film for a full wrap: about 54 ft (16.5 m) for the convertible to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).
  • Body: convertible, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Series V wraps by generation

Swipe sideways. Tap a card for the full description.

Excalibur Series V, first generation, factory photo
Factory color shown

1985–1997 Series V convertible, sedan (first generation)

1985–1997convertible, sedan (2 or 4 doors)204.0 in (5,182 mm) to 224.0 in (5,690 mm)

The Excalibur Series V first generation has an open top that is not treated like the rest of the body. A fabric top on the convertible is never wrapped, and the film ends cleanly where the top begins. If the car has a folding hard top, that top is wrapped as its own set of panels. This keeps the wrap neat and avoids stress on the fabric edges.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 54 ft (16.5 m) for the convertible to 69 ft (21 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a Series V

A partial wrap on an Excalibur Series V covers the roof, hood, or mirror caps. A Series V chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be matched to the car's shape.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Excalibur Series V: body, cut-outs and film

An Excalibur Series V vinyl wrap must follow the car's long, low body styles. The convertible and sedan bodies run from 204.0 in (5,182 mm) to 224.0 in (5,690 mm), so a wrapper works panel by panel. Curved fenders and the deep body sides need careful stretching of the film. Because the car is a sports car, every seam is planned to follow the body lines.

Series V wrap ideas start with the fixed body panels, not the fabric top. On the convertible, the film ends where the fabric top begins and the fabric is never wrapped. A folding hard top is wrapped as its own separate panels. Trim and badges on this car are removed or cut around carefully to keep the film tight.

How much vinyl to wrap a Series V depends on the body style you have. The film estimate is about 54 ft (16.5 m) for the convertible and 69 ft (21 m) for the sedan. The difference comes from the sedan's longer roof and extra doors. A wrapper measuring this car checks the actual length between 204.0 in and 224.0 in before cutting film.

More Excalibur wraps

Questions about wrapping an Excalibur Series V

How much vinyl does it take to wrap an Excalibur Series V?

It takes about 54 ft (16.5 m) for the convertible or 69 ft (21 m) for the sedan of 60-inch (1.52 m) cast film to wrap an Excalibur Series V. Chrome or patterned film can take up to about 79 ft (24 m). The estimate covers the 1985–1997 first generation body.

Is the top of a Series V wrapped?

No, a fabric top on a Series V convertible is not wrapped. The film ends where the fabric top begins. A folding hard top is wrapped as its own panels.

Which Series V body takes more film?

The sedan takes more film than the convertible. The sedan needs about 69 ft (21 m) of 60-inch film, while the convertible needs about 54 ft (16.5 m).

Can I wrap only the hood or the roof of a Series V?

Yes, you can wrap only the hood or the roof of a Series V. A partial wrap covers the roof, hood, or mirror caps. You can also choose a chrome delete for window trim and badges or clear paint protection film on the front end.