A Mustang Mach-E wrapped in purple begins with choosing the finish before the film. Matte and satin mute the reflections on the large doors, while gloss deepens the factory curves. The color change wrap then depends on the amount of film and the installer's work. A full wrap uses about 62 ft (19 m), and the charge port door is wrapped as a small piece of its own.
Factory paint condition decides how much preparation the Mustang Mach-E needs before the purple film goes on. Stone chips and scratches must be filled and sanded, because the film can show them through the color. Seams are planned along the tailgate, the bumpers and the door edges. Every trim has parking sensors in the bumpers, so the film is cut around each sensor.
A removable purple wrap on the Mustang Mach-E is cleaned with a gentle hand wash. No high-pressure spray should be aimed at the edges of the film. The charge port door is a small piece of its own, so its edges need the same care. A soft brush and mild soap keep the matte or gloss finish clean without damage.