Wraps by car

Ford Mustang Mach-E wrap

This page covers a Ford Mustang Mach-E wrap in one generation, the first generation from 2020 to now. A full vinyl wrap of the newest body uses about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 20 percent and takes about 70 ft (21.5 m). The SUV body has five doors and a tailgate that includes the rear glass.

1generations19 mof film for a full wrap

Ford Mustang Mach-E, first generation, factory photo
Ford Mustang Mach-E, first generation. Factory color shown.

Ford Mustang Mach-E wrap colors and ideas

  • Mustang Mach-E black wrap
  • Mustang Mach-E white wrap
  • Mustang Mach-E gray wrap
  • Mustang Mach-E silver wrap
  • Mustang Mach-E red wrap
  • Mustang Mach-E blue wrap
  • Mustang Mach-E green wrap
  • Mustang Mach-E yellow wrap
  • Mustang Mach-E orange wrap
  • Mustang Mach-E purple wrap
  • Mustang Mach-E pink wrap
  • Mustang Mach-E teal wrap
  • Mustang Mach-E brown wrap
  • Mustang Mach-E gold wrap
  • Mustang Mach-E chrome wrap
  • Mustang Mach-E color shift wrap
  • Mustang Mach-E carbon fiber wrap
  • Mustang Mach-E camo and patterned wrap

How much vinyl to wrap a Ford Mustang Mach-E

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)185.6 in (4,713 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Mustang Mach-E wrap cost factors

Mustang Mach-E wrap cost depends on the film choice, the size of the body and the amount of disassembly. The body is 185.6 in (4,713 mm) long and a full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) film, so a larger roll means more material. The tailgate and the bumpers add labor because the film ends at the glass and is cut around each parking sensor. The charge port door is wrapped as a small piece of its own, which adds a little time to the job.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Mustang Mach-E wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Mustang Mach-E, first generation, factory photo
Factory color shown

2020–now Mustang Mach-E SUV (first generation)

2020–nowSUV (5 doors)185.6 in (4,713 mm)

The first generation of the Mustang Mach-E runs from 2020 to now, and it was restyled in 2024. The bumpers and lights changed in the restyling, so film cut for one version does not fit the other. An installer must check the production year of the car before cutting the kit. The body style and the length stayed the same, but the front and rear cuts differ.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Mustang Mach-E

A partial wrap on a Mustang Mach-E covers the roof, the hood or the mirror caps without wrapping the whole body. A chrome delete is another partial job, and it covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end that shields the hood, the bumper and the fenders. Each job uses less film than a full wrap, and the estimate is cut from the same panel shapes.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Mustang Mach-E: body, cut-outs and film

A Ford Mustang Mach-E vinyl wrap follows the five-door SUV shape of the first generation, which measures 185.6 in (4,713 mm) long. The size matters because a full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) film, and every panel is cut to fit that length. The film estimate includes the roof, the hood, the doors and the tailgate up to the edge of the rear glass. Planning the panel layout before cutting reduces waste on the long roof and the tall doors.

Mustang Mach-E wrap ideas begin with the parts that need extra work, like the tailgate where the film ends at the edge of the rear glass. Every trim has parking sensors in the bumpers, so the film is cut around each sensor to keep them working. The charge port door is wrapped as a small piece of its own, which lets the door open without pulling the film. A chrome delete on the window trim and badges is a smaller job that changes the look without covering the whole car.

How much vinyl to wrap a Mustang Mach-E depends on the generation, and the catalog lists one generation from 2020 to now. The first generation was restyled in 2024, so bumpers and lights changed and film cut for one version does not fit the other. For a full wrap of the newest body, the estimate is about 62 ft (19 m) of 60-inch (1.52 m) cast film. An installer counts film from the panel sizes of the body, not from the trim level.

Questions about wrapping a Ford Mustang Mach-E

How much vinyl does it take to wrap a Ford Mustang Mach-E?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Ford Mustang Mach-E. That figure is the estimate for a full wrap of the newest body, with the film ending at the edge of the rear glass. Chrome or patterned film adds about 20 percent and takes about 70 ft (21.5 m). The amount is based on the five-door SUV body length of 185.6 in (4,713 mm).

Which years of the Mustang Mach-E take the same film cuts?

The years 2020 to 2023 take one set of film cuts, and 2024 to now take another set. The first generation was restyled in 2024, so the bumpers and lights changed and the old cuts do not fit the new body. An installer must match the kit to the production year of the car. Between 2020 and 2023 the cuts are the same, and from 2024 onward the cuts are the same.

Can I wrap only the hood or the roof of a Mustang Mach-E?

Yes, you can wrap only the hood or the roof of a Mustang Mach-E as a partial wrap. The partial jobs on this car are the roof, the hood and the mirror caps, and each one is cut from the same panel shapes as a full wrap. A hood wrap covers the front panel up to the edges, and a roof wrap goes from the windshield to the tailgate. The film estimate for a partial job is smaller than the 62 ft (19 m) of a full wrap.

Is a Mustang Mach-E hard to wrap?

A Mustang Mach-E is not hard to wrap, but it has a few parts that add work. The tailgate includes the rear glass, so the film must end at the edge of the glass. Every trim has parking sensors in the bumpers, and the film is cut around each sensor to keep them working. The charge port door is wrapped as a small piece of its own. The body length of 185.6 in (4,713 mm) makes the roof a long panel that needs careful handling.