Wraps by car

Ford Escape wrap

The Ford Escape wrap page covers four generations of the Escape SUV and the vinyl wrap film a full wrap of the newest body takes. The current fourth generation has been produced since 2019 and was restyled in 2022. A full wrap of this body uses about 62 ft (19 m) of 60-inch (1.52 m) cast film.

4generations19 mof film for a full wrap

Ford Escape, fourth generation, factory photo
Ford Escape, fourth generation. Factory color shown.

Ford Escape wrap colors and ideas

  • Escape black wrap
  • Escape white wrap
  • Escape gray wrap
  • Escape silver wrap
  • Escape red wrap
  • Escape blue wrap
  • Escape green wrap
  • Escape yellow wrap
  • Escape orange wrap
  • Escape purple wrap
  • Escape pink wrap
  • Escape teal wrap
  • Escape brown wrap
  • Escape gold wrap
  • Escape chrome wrap
  • Escape color shift wrap
  • Escape carbon fiber wrap
  • Escape camo and patterned wrap

How much vinyl to wrap a Ford Escape

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)180.5 in (4,585 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2012–2019SUV (5 doors)178.1 in (4,524 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2007–2012SUV (5 doors)176.4 in (4,480 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2000–2006SUV (5 doors)173.0 in (4,394 mm) to 174.9 in (4,442 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Escape wrap cost factors

Escape wrap cost depends on the amount of film, the film type, the condition of the paint and the number of cut-outs. The newest body takes about 62 ft (19 m) of cast film, and chrome or patterned film adds about 7 ft (2 m) more. A wrap on the first generation uses less film but the roof height of 69.7 in (1,770 mm) adds labor. The second generation has fog lamps in every front bumper, so the bumper film needs cut-outs.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2022: bumpers and lights differ between the versions, and so do the film cuts.

Escape wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Escape, fourth generation, factory photo
Factory color shown

2019–now Escape SUV (fourth generation)

2019–nowSUV (5 doors)180.5 in (4,585 mm)

The fourth generation Ford Escape was restyled in 2022 with new bumpers and lights. Film cut for the 2019–2021 version does not fit the 2022–now version. A full wrap of this body uses about 62 ft (19 m) of 60-inch (1.52 m) cast film. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Ford Escape, third generation, factory photo
Factory color shown

2012–2019 Escape SUV (third generation)

2012–2019SUV (5 doors)178.1 in (4,524 mm)

The third generation Ford Escape was made from 2012 to 2019 and restyled in 2015. On a car of these years the paint may be original or repainted, so a test spot comes before a full wrap. The body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The tailgate has the rear glass in it, and the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Ford Escape, second generation, factory photo
Factory color shown

2007–2012 Escape SUV (second generation)

2007–2012SUV (5 doors)176.4 in (4,480 mm)

The second generation Ford Escape is a five-door SUV that measures 176.4 in (4,480 mm) in length. A full wrap takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, and the body has the usual panel count of a five-door SUV. Every trim of this generation has fog lamps in the front bumper, so the bumper film needs cut-outs. Some trims have a sunroof, and the roof film is cut around its opening.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Ford Escape, first generation, factory photo
Factory color shown

2000–2006 Escape SUV (first generation)

2000–2006SUV (5 doors)173.0 in (4,394 mm) to 174.9 in (4,442 mm)

The first generation Ford Escape is the tallest body in the catalog at 69.7 in (1,770 mm). The roof is wrapped from a platform, which adds time to the job. The body length ranges from 173.0 in (4,394 mm) to 174.9 in (4,442 mm), and a full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. The tailgate has the rear glass in it, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on an Escape

A partial wrap on a Ford Escape can cover the roof, hood or mirror caps. Chrome delete (bright trim covered with black film) is often done on the window trim and badges. Paint protection film (PPF) is an option for the front end with clear film. These jobs use less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Escape: body, cut-outs and film

The Ford Escape vinyl wrap is shaped by the five-door SUV body and its length, which ranges from 173.0 in (4,394 mm) on the first generation to 180.5 in (4,585 mm) on the fourth. A full wrap covers the roof, hood, sides, tailgate and bumpers in one job. The vehicle height of the first generation is 69.7 in (1,770 mm), so the roof needs a platform. The newest body has a tailgate with the rear glass in it, and the film ends at the edge of the glass.

Escape wrap ideas start with the parts that need cut-outs or come off during the wrap. Every generation has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Some trims of the second generation have a sunroof, and the roof film is cut around its opening. On the fourth generation, the plug-in and electric versions have a charge port door that is wrapped as a small piece of its own.

How much vinyl to wrap an Escape changes between the generations because the bodies grew from 173.0 in (4,394 mm) to 180.5 in (4,585 mm) in length. The first generation takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, while the fourth takes about 62 ft (19 m). The second and third generations both take about 61 ft (18.5 m) of the same film. Chrome or patterned film adds extra length on every generation because the pattern must be matched on each panel.

Questions about wrapping a Ford Escape

How much vinyl does it take to wrap a Ford Escape?

A full wrap of the newest Ford Escape body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 7 ft (2 m) more. This estimate is for the fourth generation produced from 2019 to now.

Which years of the Escape take the same film cuts?

The Ford Escape generations take different film cuts because of restylings in 2015 and 2022. The fourth generation has one cut for 2019–2021 and another for 2022–now. The third generation has one cut for 2012–2015 and another for 2015–2019. The first and second generations each have their own cuts.

Can I wrap only the hood or the roof of an Escape?

Yes, you can wrap only the hood or the roof of an Escape. A partial wrap can also cover the mirror caps. Chrome delete on the window trim and badges is another smaller job. Paint protection film (PPF) on the front end is also possible.

Is an Escape hard to wrap?

An Escape is not hard to wrap, but some parts add work. The tailgate with the rear glass in it means the film ends at the edge of the glass. The first generation is 69.7 in (1,770 mm) tall, so the roof is wrapped from a platform. Some trims have a sunroof, and the roof film is cut around its opening.