Wraps by car

Ford Bronco Sport wrap

This page covers the Ford Bronco Sport wrap and the vinyl wrap options for this SUV. The Ford Bronco Sport has one generation, produced from 2020 to now. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film.

1generations18 mof film for a full wrap

Ford Bronco Sport, first generation, factory photo
Ford Bronco Sport, first generation. Factory color shown.

Ford Bronco Sport wrap colors and ideas

  • Bronco Sport black wrap
  • Bronco Sport white wrap
  • Bronco Sport gray wrap
  • Bronco Sport silver wrap
  • Bronco Sport red wrap
  • Bronco Sport blue wrap
  • Bronco Sport green wrap
  • Bronco Sport yellow wrap
  • Bronco Sport orange wrap
  • Bronco Sport purple wrap
  • Bronco Sport pink wrap
  • Bronco Sport teal wrap
  • Bronco Sport brown wrap
  • Bronco Sport gold wrap
  • Bronco Sport chrome wrap
  • Bronco Sport color shift wrap
  • Bronco Sport carbon fiber wrap
  • Bronco Sport camo and patterned wrap

How much vinyl to wrap a Ford Bronco Sport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)172.7 in (4,386 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Bronco Sport wrap cost factors

A Bronco Sport wrap cost depends on the coverage, the film grade, and the labor for this SUV. Full wraps need about 59 ft (18 m) of 60-inch (1.52 m) cast film, or about 76 ft (23 m) for chrome or patterned film. The 70.2 in (1,783 mm) height means the roof takes more time. The finish and any printed design also change the total work.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (70.2 in (1,783 mm)): the roof is wrapped from a platform.

Bronco Sport wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Bronco Sport, first generation, factory photo
Factory color shown

2020–now Bronco Sport SUV (first generation)

2020–nowSUV (5 doors)172.7 in (4,386 mm)

The first generation Ford Bronco Sport is 70.2 in (1,783 mm) tall. Because of that height, the roof is wrapped from a platform and takes more time. The SUV body is otherwise straightforward, with no major body style changes from 2020 to now.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (70.2 in (1,783 mm)): the roof is wrapped from a platform.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Bronco Sport

A partial wrap on a Ford Bronco Sport can cover the roof, hood, or mirror caps. A Bronco Sport chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Bronco Sport: body, cut-outs and film

A Ford Bronco Sport vinyl wrap follows the body of a five-door SUV. The vehicle is 172.7 in (4,386 mm) long, so the main body panels are straightforward to cover. Because it is an SUV, the roof adds surface area and must be planned into the material estimate.

Bronco Sport wrap ideas should account for the tailgate with rear glass in it. The film ends at the edge of the glass on that panel. The body is 70.2 in (1,783 mm) tall, so wrapping the roof requires a platform.

If you are counting how much vinyl to wrap a Bronco Sport, the single generation keeps the math simple. All 2020 to now models share the same five-door SUV body. Any full wrap uses roughly the same amount of film on every Bronco Sport.

Questions about wrapping a Ford Bronco Sport

How much vinyl does it take to wrap a Ford Bronco Sport?

A full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan about 76 ft (23 m).

Can I wrap only the hood or the roof of a Bronco Sport?

Yes, you can wrap only the hood or the roof of a Bronco Sport. The roof, hood, and mirror caps are all offered as separate partial wrap jobs.

Is a Bronco Sport hard to wrap?

A Bronco Sport has a tall body and a tailgate with glass. The 70.2 in (1,783 mm) height means the roof must be wrapped from a platform. The film on the tailgate ends at the edge of the glass.

How many generations of the Bronco Sport does this page cover?

This page covers one generation of the Ford Bronco Sport, produced from 2020 to now.