Wraps by car

Ford Mondeo wrap

The Ford Mondeo wrap page covers five generations of the mid-size Ford Mondeo, from 1992 to the present. A full vinyl wrap of the newest body takes about 59 ft (18 m) for the sedan and up to 67 ft (20.5 m) for the wagon, using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 76 ft (23 m).

5generations18 mof film for a full wrap

Ford Mondeo, fifth generation, factory photo
Ford Mondeo, fifth generation. Factory color shown.

Ford Mondeo wrap colors and ideas

  • Mondeo black wrap
  • Mondeo white wrap
  • Mondeo gray wrap
  • Mondeo silver wrap
  • Mondeo red wrap
  • Mondeo blue wrap
  • Mondeo green wrap
  • Mondeo yellow wrap
  • Mondeo orange wrap
  • Mondeo purple wrap
  • Mondeo pink wrap
  • Mondeo teal wrap
  • Mondeo brown wrap
  • Mondeo gold wrap
  • Mondeo chrome wrap
  • Mondeo color shift wrap
  • Mondeo carbon fiber wrap
  • Mondeo camo and patterned wrap

How much vinyl to wrap a Ford Mondeo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowliftback, sedan, wagon (4 or 5 doors)191.6 in (4,867 mm) to 191.8 in (4,871 mm)about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
2007–2015liftback, sedan, wagon (4 or 5 doors)188.1 in (4,778 mm) to 190.9 in (4,850 mm)about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m)
2000–2007liftback, sedan, wagon (4 or 5 doors)186.3 in (4,731 mm) to 189.1 in (4,804 mm)about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)
1996–2000liftback, sedan, wagon (4 or 5 doors)179.4 in (4,556 mm) to 183.9 in (4,671 mm)about 51 ft (15.5 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)
1992–1996liftback, sedan, wagon (4 or 5 doors)176.4 in (4,481 mm) to 182.3 in (4,630 mm)about 51 ft (15.5 m) for the liftback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m)

Mondeo wrap cost factors

Mondeo wrap cost depends on the body style, the generation, and the film type, not just the size of the car. The newest sedan needs about 59 ft (18 m) of film, while the wagon needs 67 ft (20.5 m), so a wagon wrap costs more in material. Chrome or patterned film can raise the amount to up to 76 ft (23 m). The installer's time also depends on cut-outs for sensors, cameras, and fog lamps on some trims.

  • Film for a full wrap: about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).
  • Body: liftback, sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2019: bumpers and lights differ between the versions, and so do the film cuts.

Mondeo wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Mondeo, fifth generation, factory photo
Factory color shown

2014–now Mondeo liftback, sedan, wagon (fifth generation)

2014–nowliftback, sedan, wagon (4 or 5 doors)191.6 in (4,867 mm) to 191.8 in (4,871 mm)

The fifth generation Ford Mondeo was restyled in 2019, with bumpers and lights changed. Film cut for one version of this body does not fit the other, so you must match the wrap kit to the car's year. This generation runs from 2014 to now, and the restyle splits it into early and late versions. Check the front and rear bumper shape before ordering pre-cut film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Ford Mondeo, fourth generation, factory photo
Factory color shown

2007–2015 Mondeo liftback, sedan, wagon (fourth generation)

2007–2015liftback, sedan, wagon (4 or 5 doors)188.1 in (4,778 mm) to 190.9 in (4,850 mm)

The fourth generation Ford Mondeo covers 2007 to 2015, but its production overlaps with the fifth generation from 2014 to 2015. The owner of a car from those overlapping years should check which body it is, because the panels differ. This generation was restyled in 2010, so early and late cars also differ. Knowing the exact body style and year prevents ordering film for the wrong shape.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 76 ft (23 m).

Ford Mondeo, third generation, factory photo
Factory color shown

2000–2007 Mondeo liftback, sedan, wagon (third generation)

2000–2007liftback, sedan, wagon (4 or 5 doors)186.3 in (4,731 mm) to 189.1 in (4,804 mm)

The third generation Ford Mondeo offers liftback, sedan, and wagon body styles, and the style decides the panel plan and film amount. The sedan starts at about 52 ft (16 m) of film, while the wagon takes up to 57 ft (17.5 m). This generation was restyled in 2003, so pre- and post-facelift cars have different bumper and light shapes. Every trim has fog lamps in the front bumper, so cut-outs are always needed in the bumper film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Ford Mondeo, second generation, factory photo
Factory color shown

1996–2000 Mondeo liftback, sedan, wagon (second generation)

1996–2000liftback, sedan, wagon (4 or 5 doors)179.4 in (4,556 mm) to 183.9 in (4,671 mm)

The second generation Ford Mondeo was produced from 1996 to 2000, and paint age affects how a wrap is applied on these cars. Panels may be original or repainted, so a test spot comes before a full wrap to check adhesion. This generation has a tailgate with the rear glass, so the film ends at the edge of the glass. The car ranges from 179.4 in (4,556 mm) to 183.9 in (4,671 mm), and film need is about 51 ft (15.5 m) to 56 ft (17 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the sedan to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Ford Mondeo, first generation, factory photo
Factory color shown

1992–1996 Mondeo liftback, sedan, wagon (first generation)

1992–1996liftback, sedan, wagon (4 or 5 doors)176.4 in (4,481 mm) to 182.3 in (4,630 mm)

The first generation Ford Mondeo, from 1992 to 1996, is the smallest of all generations at 176.4 in (4,481 mm) to 182.3 in (4,630 mm). Its liftback needs about 51 ft (15.5 m) of film, while the wagon needs up to 56 ft (17 m). The number of panels is the same for liftback and sedan, but the wagon adds a larger rear area. Chrome or patterned film can require up to 70 ft (21.5 m) on this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) for the liftback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Mondeo

A partial wrap on a Ford Mondeo can cover the roof, hood, or mirror caps, and it uses much less film than a full wrap. Mondeo chrome delete replaces bright trim with black film on window trim and badges. Paint protection film (PPF) is a clear film that can be applied to the front end for protection. These jobs are shorter and can be done without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Mondeo: body, cut-outs and film

A Ford Mondeo vinyl wrap must fit liftback, sedan, and wagon bodies, so the panel plan changes with the body style. The fifth generation measures from 191.6 in (4,867 mm) to 191.8 in (4,871 mm) long, which is a typical mid-size car for wrapping. A tailgate with the rear glass in it means the film ends at the edge of the glass. The wagon uses more film than the sedan, about 67 ft (20.5 m) compared to 59 ft (18 m).

Mondeo wrap ideas include planning cut-outs for sensors, cameras, and fog lamps, depending on the trim. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Some trims have cameras in the body, and the film is cut around each lens. Some trims have fog lamps in the front bumper, which need cut-outs in the bumper film. A tailgate with the rear glass in it requires the film to end at the edge of the glass.

How much vinyl to wrap a Mondeo changes between generations, starting with about 51 ft (15.5 m) for the first and second generations. The third generation needs about 52 ft (16 m) for the sedan to 57 ft (17.5 m) for the wagon. The fourth and fifth generations both take about 59 ft (18 m) for the sedan to 67 ft (20.5 m) for the wagon. Chrome or patterned film adds up to about 70 ft (21.5 m) on early generations and up to 76 ft (23 m) on later ones.

Questions about wrapping a Ford Mondeo

How much vinyl does it take to wrap a Ford Mondeo?

A full wrap of a Ford Mondeo takes about 59 ft (18 m) for the sedan and 67 ft (20.5 m) for the wagon, using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 76 ft (23 m).

Which years of the Mondeo take the same film cuts?

The same film cuts fit within each generation: first generation 1992–1996, second 1996–2000, third 2000–2007 with a restyle in 2003, fourth 2007–2015 with a restyle in 2010, and fifth 2014–now with a restyle in 2019. Restyled models have different bumpers and lights, so early and late cars within a generation do not share all cuts.

Which Mondeo body takes more film?

The wagon takes more film than the liftback and sedan in every Mondeo generation. For the newest body, the wagon needs about 67 ft (20.5 m) compared to 59 ft (18 m) for the sedan.

Can I wrap only the hood or the roof of a Mondeo?

Yes, you can wrap only the hood or the roof of a Ford Mondeo. A partial wrap can cover the roof, hood, or mirror caps, and it uses much less film than a full wrap. Chrome delete is another option that covers window trim and badges. Paint protection film can be applied to the front end for clear protection.