Wraps by car

Ford EcoSport wrap

The Ford EcoSport wrap page covers both generations of this compact SUV and the vinyl wrap a full color change takes. The second generation has run since 2012 and the first generation from 2003 to 2012. A full wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

2generations17.5 mof film for a full wrap

Ford EcoSport, second generation, factory photo
Ford EcoSport, second generation. Factory color shown.

Ford EcoSport wrap colors and ideas

  • EcoSport black wrap
  • EcoSport white wrap
  • EcoSport gray wrap
  • EcoSport silver wrap
  • EcoSport red wrap
  • EcoSport blue wrap
  • EcoSport green wrap
  • EcoSport yellow wrap
  • EcoSport orange wrap
  • EcoSport purple wrap
  • EcoSport pink wrap
  • EcoSport teal wrap
  • EcoSport brown wrap
  • EcoSport gold wrap
  • EcoSport chrome wrap
  • EcoSport color shift wrap
  • EcoSport carbon fiber wrap
  • EcoSport camo and patterned wrap

How much vinyl to wrap a Ford EcoSport

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowSUV (5 doors)168.2 in (4,273 mm) to 170.3 in (4,325 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2003–2012SUV (5 doors)166.5 in (4,228 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

EcoSport wrap cost factors

An EcoSport wrap cost depends on the size of the body and the film you choose. The second generation needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full color change. Chrome or patterned film takes about 66 ft (20 m) because the pattern must be matched. The number of cut-outs for sensors and cameras on some trims also adds labor.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

EcoSport wraps by generation

Swipe sideways. Tap a card for the full description.

Ford EcoSport, second generation, factory photo
Factory color shown

2012–now EcoSport SUV (second generation)

2012–nowSUV (5 doors)168.2 in (4,273 mm) to 170.3 in (4,325 mm)

The second generation Ford EcoSport was restyled in 2017 with new bumpers and lights. Film cut for one version does not fit the other, so the year matters when you order a kit. The body length varies from 168.2 in (4,273 mm) to 170.3 in (4,325 mm) across these versions. A full wrap of this generation takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Ford EcoSport, first generation, factory photo
Factory color shown

2003–2012 EcoSport SUV (first generation)

2003–2012SUV (5 doors)166.5 in (4,228 mm)

The first generation Ford EcoSport ran from 2003 to 2012 and is shorter at 166.5 in (4,228 mm). Paint age on a car of these years is a real factor because panels may be original or repainted. A test spot comes before a full wrap to check how the paint reacts to the film. This generation takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on an EcoSport

The Ford EcoSport also suits partial wraps and other film jobs. A partial wrap can cover the roof, hood, or mirror caps. An EcoSport chrome delete covers the window trim, decorative moldings, and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford EcoSport: body, cut-outs and film

A Ford EcoSport vinyl wrap follows the body of a five-door SUV that is 168.2 in (4,273 mm) to 170.3 in (4,325 mm) long in the second generation. The first generation is 166.5 in (4,228 mm) long, so the two bodies use different film cuts. The roof, hood and large side panels are the main areas the film covers. The compact size keeps the job manageable for one installer.

EcoSport wrap ideas start with the parts that need extra work on the second generation. A tailgate with the rear glass in it means the film ends at the edge of the glass. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Bright decorative moldings stay bright next to the film unless a chrome delete covers them, and parking sensors or cameras need cut-outs in the film.

How much vinyl to wrap an EcoSport depends on the generation you have. The second generation takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a standard color. The first generation takes about 59 ft (18 m) of the same film. A restyling in 2017 changed the bumpers and lights of the second generation, so film cut before that year does not fit the newer version.

Questions about wrapping a Ford EcoSport

How much vinyl does it take to wrap a Ford EcoSport?

A full wrap of a Ford EcoSport takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for the newest body. That covers a standard color change on the second generation. The first generation takes slightly more at about 59 ft (18 m).

Which years of the EcoSport take the same film cuts?

The 2012 and newer EcoSport models take the same film cuts after the 2017 restyling. The 2003 to 2012 first generation is a different body with its own cuts. Within the second generation, the 2017 bumpers and lights mean earlier and later versions do not share all cuts.

Can I wrap only the hood or the roof of an EcoSport?

Yes, you can wrap only the hood or the roof of an EcoSport. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim, decorative moldings, and badges separately.

Is an EcoSport hard to wrap?

An EcoSport is not hard to wrap, but some details add work. The tailgate with the rear glass in it means the film ends at the edge of the glass. Some trims have roof rails, parking sensors, cameras, or fog lamps that need careful cutting. The compact body size keeps the overall job straightforward.