Wraps by car

Ford Fusion (USA) wrap

A Ford Fusion (USA) wrap covers the mid-size sedan's body panels with vinyl film. The Fusion (USA) appears in two generations in this catalog, spanning 2005 to the present. A full vinyl wrap of the newest body uses about 59 ft (18 m) of 60-inch (1.52 m) cast film.

2generations18 mof film for a full wrap

Ford Fusion (USA), second generation, factory photo
Ford Fusion (USA), second generation. Factory color shown.

Ford Fusion (USA) wrap colors and ideas

  • Fusion (USA) black wrap
  • Fusion (USA) white wrap
  • Fusion (USA) gray wrap
  • Fusion (USA) silver wrap
  • Fusion (USA) red wrap
  • Fusion (USA) blue wrap
  • Fusion (USA) green wrap
  • Fusion (USA) yellow wrap
  • Fusion (USA) orange wrap
  • Fusion (USA) purple wrap
  • Fusion (USA) pink wrap
  • Fusion (USA) teal wrap
  • Fusion (USA) brown wrap
  • Fusion (USA) gold wrap
  • Fusion (USA) chrome wrap
  • Fusion (USA) color shift wrap
  • Fusion (USA) carbon fiber wrap
  • Fusion (USA) camo and patterned wrap

How much vinyl to wrap a Ford Fusion (USA)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowsedan (4 doors)191.7 in (4,869 mm) to 191.8 in (4,872 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2005–2011sedan (4 doors)190.2 in (4,831 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Fusion (USA) wrap cost factors

A Fusion (USA) wrap cost depends on film type, coverage, and body condition. The second generation's larger panels need about 59 ft (18 m) of cast film versus 54 ft (16.5 m) for the first generation. Chrome or patterned film adds about 10 ft (3 m) to the material estimate. Labor for a four-door sedan includes bumper removal and door handle cut-outs.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Restyled in 2016, 2019: bumpers and lights differ between the versions, and so do the film cuts.

Fusion (USA) wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Fusion (USA), second generation, factory photo
Factory color shown

2012–now Fusion (USA) sedan (second generation)

2012–nowsedan (4 doors)191.7 in (4,869 mm) to 191.8 in (4,872 mm)

The second generation Fusion (USA) ran from 2012 to the present, with restyling in 2016 and 2019. Bumpers and lights changed in those years, so film cut for one version does not fit the other. Wrappers should confirm the production year before cutting film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Ford Fusion (USA), first generation, factory photo
Factory color shown

2005–2011 Fusion (USA) sedan (first generation)

2005–2011sedan (4 doors)190.2 in (4,831 mm)

The first generation Fusion (USA) covered 2005 to 2011, with a restyling in 2009. Paint age matters on a car of these years, as panels may be original or repainted. A test spot comes before a full wrap to check film adhesion.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Fusion (USA)

A partial wrap on the Fusion (USA) can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear option for the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Fusion (USA): body, cut-outs and film

A Ford Fusion (USA) vinyl wrap follows the four-door sedan body styling. The second generation measures 191.7 in (4,869 mm) to 191.8 in (4,872 mm) long, while the first generation is 190.2 in (4,831 mm). These mid-size dimensions mean a standard roll width of 60 inches (1.52 m) covers most panels without splicing.

Fusion (USA) wrap ideas start with the door handles, mirrors, and badges, which need cut-outs or removal. The front and rear bumpers come off for clean edges, and the door trim panels may be loosened to tuck film. The roof antenna and side moldings also require careful trimming.

How much vinyl to wrap a Fusion (USA) depends on the generation and any restyling. The second generation from 2012 onward needs about 59 ft (18 m) of cast film, while the first generation from 2005 to 2011 needs about 54 ft (16.5 m). Choosing chrome or patterned film adds roughly 10 ft (3 m) to the estimate for either body.

Questions about wrapping a Ford Fusion (USA)

How much vinyl does it take to wrap a Ford Fusion (USA)?

A full wrap of a Ford Fusion (USA) takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for the newest body. Chrome or patterned film increases the estimate to about 69 ft (21 m). The first generation needs about 54 ft (16.5 m) of standard film.

Which years of the Fusion (USA) take the same film cuts?

The 2012–2015, 2016–2018, and 2019–present Fusion (USA) models share film cuts within each period. The restyling in 2016 and 2019 changed bumpers and lights, so film does not interchange across those years. First-generation cars from 2005–2009 and 2010–2011 also have different cuts.

Can I wrap only the hood or the roof of a Fusion (USA)?

Yes, you can wrap only the hood or the roof of a Fusion (USA). A partial wrap on the roof, hood, or mirror caps is a common smaller job. You can also do a chrome delete on window trim and badges. Paint protection film on the front end is another option.

Is a Fusion (USA) hard to wrap?

A Fusion (USA) is not especially hard to wrap, but the bumpers and mirrors add work. The mid-size sedan has large, flat panels that are easy to cover. The front and rear bumpers require removal for clean edges. The four doors with handles and mirror caps need careful cutting.