Wraps by car

Ford Transit Connect wrap

The Ford Transit Connect wrap page covers all three generations of this compact van. A full wrap of the newest body uses about 76 ft (23 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 85 ft (26 m) on the same body.

3generations23 mof film for a full wrap

Ford Transit Connect, third generation, factory photo
Ford Transit Connect, third generation. Factory color shown.

Ford Transit Connect wrap colors and ideas

  • Transit Connect black wrap
  • Transit Connect white wrap
  • Transit Connect gray wrap
  • Transit Connect silver wrap
  • Transit Connect red wrap
  • Transit Connect blue wrap
  • Transit Connect green wrap
  • Transit Connect yellow wrap
  • Transit Connect orange wrap
  • Transit Connect purple wrap
  • Transit Connect pink wrap
  • Transit Connect teal wrap
  • Transit Connect brown wrap
  • Transit Connect gold wrap
  • Transit Connect chrome wrap
  • Transit Connect color shift wrap
  • Transit Connect carbon fiber wrap
  • Transit Connect camo and patterned wrap

How much vinyl to wrap a Ford Transit Connect

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowvan (5 doors)177.8 in (4,515 mm) to 191.7 in (4,868 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
2012–2018van (4 doors)173.9 in (4,418 mm) to 189.7 in (4,818 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
2001–2009van (4 doors)168.4 in (4,278 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Transit Connect wrap cost factors

Transit Connect wrap cost depends on the size of the body you wrap. The newest van is 177.8 in (4,515 mm) to 191.7 in (4,868 mm) long and needs about 76 ft (23 m) of film. A chrome or patterned film uses about 85 ft (26 m), which adds material to the job.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.
  • A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Transit Connect wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Transit Connect, third generation, factory photo
Factory color shown

2024–now Transit Connect van (third generation)

2024–nowvan (5 doors)177.8 in (4,515 mm) to 191.7 in (4,868 mm)

The third generation Ford Transit Connect has sliding side doors on its five-door van body. The door tracks stay bare, so the film is cut along them. This creates a clean edge that protects the film from the sliding mechanism.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

A tall body (72.2 in (1,835 mm)): the roof is wrapped from a platform.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Ford Transit Connect, second generation, factory photo
Factory color shown

2012–2018 Transit Connect van (second generation)

2012–2018van (4 doors)173.9 in (4,418 mm) to 189.7 in (4,818 mm)

The second generation Ford Transit Connect stands 73.3 in (1,862 mm) tall. The roof is wrapped from a platform, which adds time to the job. The installer works above the van and reaches the center of the roof from that platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (73.3 in (1,862 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

2001–2009 Transit Connect van (first generation)

2001–2009van (4 doors)168.4 in (4,278 mm)

The first generation Ford Transit Connect is a 2001–2009 van that may have original or repainted panels. Paint age matters because old paint can lift when film is removed. A test spot comes before a full wrap to check how the paint holds.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.4 in (1,814 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Transit Connect

A partial wrap on a Ford Transit Connect can cover the roof, hood, or mirror caps. A Transit Connect chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Transit Connect: body, cut-outs and film

A Ford Transit Connect vinyl wrap must follow the tall, slab-sided body of a minivan. The current van runs 177.8 in (4,515 mm) to 191.7 in (4,868 mm) long, so material is cut to the wheelbase you have. Sliding side doors add film around the tracks but the tracks themselves stay bare.

Transit Connect wrap ideas begin with the sliding side doors and their bare tracks. The charge port door on plug-in and electric versions is wrapped as a small piece of its own. The tall body at 72.2 in (1,835 mm) means the roof is wrapped from a platform.

How much vinyl to wrap a Transit Connect changes with the generation. The first generation is 168.4 in (4,278 mm) long and takes about 67 ft (20.5 m) of cast film. The second generation runs 173.9 in (4,418 mm) to 189.7 in (4,818 mm) and takes about 74 ft (22.5 m).

Questions about wrapping a Ford Transit Connect

How much vinyl does it take to wrap a Ford Transit Connect?

A Ford Transit Connect wrap takes about 76 ft (23 m) of 60-inch (1.52 m) cast film for the newest body. That figure covers the full exterior of the van. Chrome or patterned film takes about 85 ft (26 m) because of extra material for matching.

Are the sliding doors of a Transit Connect wrapped?

The sliding doors of a Transit Connect are wrapped, but the tracks stay bare. The film is cut along the door tracks so the doors can slide freely. This leaves the track area unpainted, which is normal for this van.

Can I wrap only the hood or the roof of a Transit Connect?

Yes, you can wrap only the hood or the roof of a Transit Connect. The partial wrap options include the roof, hood, and mirror caps. A chrome delete on this van covers the window trim and badges.

Is a Transit Connect hard to wrap?

A Transit Connect is not the most difficult van to wrap, but its size adds work. The tall body at 72.2 in (1,835 mm) on the current model means the roof is wrapped from a platform. The sliding side doors also need careful cutting along the tracks.