Wraps by car

Ford Expedition wrap

The Ford Expedition wrap page covers all five generations of this full-size SUV, from the first 1996–2002 model to the current fifth generation that has been produced since 2024. A complete vinyl wrap on the newest Expedition body takes about 84 ft (25.5 m) of 60-inch (1.52 m) cast film, or about 94 ft (28.5 m) if you choose chrome or patterned film. The fifth generation is offered as a five-door SUV with an overall length between 210.0 in (5,334 mm) and 221.7 in (5,631 mm).

5generations25.5 mof film for a full wrap

Ford Expedition, fifth generation, factory photo
Ford Expedition, fifth generation. Factory color shown.

Ford Expedition wrap colors and ideas

  • Expedition black wrap
  • Expedition white wrap
  • Expedition gray wrap
  • Expedition silver wrap
  • Expedition red wrap
  • Expedition blue wrap
  • Expedition green wrap
  • Expedition yellow wrap
  • Expedition orange wrap
  • Expedition purple wrap
  • Expedition pink wrap
  • Expedition teal wrap
  • Expedition brown wrap
  • Expedition gold wrap
  • Expedition chrome wrap
  • Expedition color shift wrap
  • Expedition carbon fiber wrap
  • Expedition camo and patterned wrap

How much vinyl to wrap a Ford Expedition

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2024–nowSUV (5 doors)210.0 in (5,334 mm) to 221.7 in (5,631 mm)about 84 ft (25.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m)
2017–nowSUV (5 doors)210.0 in (5,334 mm)about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
2006–2017SUV (5 doors)205.8 in (5,227 mm) to 206.0 in (5,232 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
2002–2006SUV (5 doors)205.8 in (5,227 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
1996–2002SUV (5 doors)204.6 in (5,197 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Expedition wrap cost factors

Expedition wrap cost depends on the size of the body, the film you pick, and how much of the car you cover. A full wrap on the current body uses about 84 ft (25.5 m) of cast film, so a car from 2024 or later needs a larger film allowance than a 1996–2002 model that uses about 69 ft (21 m). The cost changes with the film type, because a chrome or patterned vinyl needs about 94 ft (28.5 m) for the newest generation. Installing on a vehicle 76.4 in (1,941 mm) tall adds labor time for roof work from a platform, which also affects the final cost.

  • Film for a full wrap: about 84 ft (25.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (76.4 in (1,941 mm)): the roof is wrapped from a platform.

Expedition wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Expedition, fifth generation, factory photo
Factory color shown

2024–now Expedition SUV (fifth generation)

2024–nowSUV (5 doors)210.0 in (5,334 mm) to 221.7 in (5,631 mm)

The fifth generation Ford Expedition is the tallest body in the current catalog at 76.4 in (1,941 mm), so the roof must be wrapped from a platform. Reaching the center of the roof on this 210.0–221.7 in (5,334–5,631 mm) long vehicle means the installer works above shoulder height for an extended period. This height adds time to the full wrap, and you may notice more labor cost for roof-only jobs on this generation. The body is otherwise a conventional five-door SUV with long side panels that need careful squeegeeing.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (76.4 in (1,941 mm)): the roof is wrapped from a platform.

Film: about 84 ft (25.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m).

Ford Expedition, fourth generation, factory photo
Factory color shown

2017–now Expedition SUV (fourth generation)

2017–nowSUV (5 doors)210.0 in (5,334 mm)

The fourth generation Ford Expedition was built from 2017 and continues alongside the new fifth generation that started in 2024, so some owners need to identify which body they have. If your Expedition was made in 2024 or later, check whether it has the newer nose and tail styling, because the two bodies share the same 210.0 in (5,334 mm) length. A full wrap on the fourth generation takes about 79 ft (24 m) of 60-inch film, slightly less than the fifth generation's 84 ft (25.5 m). The car count for film is different enough that you should confirm the generation before ordering material.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (76.4 in (1,941 mm)): the roof is wrapped from a platform.

Film: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Ford Expedition, third generation, factory photo
Factory color shown

2006–2017 Expedition SUV (third generation)

2006–2017SUV (5 doors)205.8 in (5,227 mm) to 206.0 in (5,232 mm)

The third generation Ford Expedition was produced from 2006 to 2017 and received a restyling in 2014 that changed the front and rear ends. Film cut for the pre-2014 bumpers will not fit the post-2014 bumpers because the shapes and lamp openings are different. The body length stayed almost the same at 205.8 in (5,227 mm) to 206.0 in (5,232 mm), so a full wrap still takes about 77 ft (23.5 m) of cast film. When ordering a pre-cut kit for this generation, you need to know whether the car is the early or late version.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (77.2 in (1,961 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Ford Expedition, second generation, factory photo
Factory color shown

2002–2006 Expedition SUV (second generation)

2002–2006SUV (5 doors)205.8 in (5,227 mm)

The second generation Ford Expedition from 2002–2006 is old enough that the paint conditions vary widely, so a good shop always tests film adhesion on a small spot. A car of this age may have original paint, a full repaint, or repaired panels, and a color change wrap sticks differently to each. The body is 205.8 in (5,227 mm) long and about 77.6 in (1,971 mm) tall, so a full wrap needs about 77 ft (23.5 m) of 60-inch film. Any repainted area must be fully cured and smooth, or the film may lift when it is stretched over the tall roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (77.6 in (1,971 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Ford Expedition, first generation, factory photo
Factory color shown

1996–2002 Expedition SUV (first generation)

1996–2002SUV (5 doors)204.6 in (5,197 mm)

The first generation Ford Expedition from 1996–2002 is the smallest of the five bodies, at 204.6 in (5,197 mm) long and 74.3 in (1,887 mm) tall. Its shorter length means a full wrap takes only about 69 ft (21 m) of 60-inch film, the lowest figure in this catalog. The body is still a five-door SUV with four full doors and a liftgate, so the panel count is the same as later generations: around 15 major panels. The rear glass is set into the liftgate, so the tailgate film is trimmed to the edge of the window on this model too.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.3 in (1,887 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on an Expedition

The Ford Expedition handles smaller wrap jobs well, including a partial wrap on the roof, hood, or mirror caps. A roof wrap on this tall SUV is a job that needs a platform, and it is a way to add contrast without covering the whole vehicle. Chrome delete is the black film service that covers bright window trim and badges, and on the Expedition the window trim is a long run that uses about 8–10 ft (2.4–3 m) of film. Paint protection film (PPF) works as clear protection on the front end, and on this large, upright nose it protects the hood, fenders, and the front of the mirrors from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Expedition: body, cut-outs and film

A Ford Expedition vinyl wrap covers a large five-door SUV body, so the main job is managing long, flat side panels and a tall roof. The newest body measures from 210.0 in (5,334 mm) to 221.7 in (5,631 mm) long and 76.4 in (1,941 mm) tall, which means reaching the roof safely requires a platform. Older generations from 2002–2017 are slightly shorter at 205.8 in (5,227 mm), while the first generation is 204.6 in (5,197 mm) long. All generations have a liftgate with glass set into it, so film stops at the edge of the rear window.

Expedition wrap ideas usually begin with the biggest surfaces: the hood, roof, and full side panels from fender to quarter panel. The tailgate wraps as one panel but the film ends at the edge of the rear glass, so no film is applied over the window itself. Installing a color change wrap on this SUV means removing the door handles, mirror caps, roof rails where fitted, and the rear spoiler to tuck film edges cleanly. The tall body makes the roof wrap a two-person job from a platform, and the front bumper needs relief cuts around the grille and fog light openings.

How much vinyl to wrap an Expedition depends on which generation you have, because body sizes changed over the years. The current fifth generation takes about 84 ft (25.5 m) of cast film, while the fourth generation from 2017 takes about 79 ft (24 m). Third and second generation Expeditions from 2002–2017 are similar to each other at about 77 ft (23.5 m), and the first generation from 1996–2002 takes about 69 ft (21 m). All estimates are for 60-inch (1.52 m) film; add about 10 ft (3 m) if the film has a directional pattern or a chrome finish.

Questions about wrapping a Ford Expedition

How much vinyl does it take to wrap a Ford Expedition?

A Ford Expedition takes about 84 ft (25.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. A chrome or patterned film increases that to about 94 ft (28.5 m) because the pattern repeat and the need to orient the film waste more material. The older generations need less: about 79 ft (24 m) for the 2017–2024 body and 69 ft (21 m) for the 1996–2002 body. All figures are for a complete color change excluding the door jambs.

Can I wrap only the hood or the roof of an Expedition?

Yes, you can wrap only the hood or only the roof of an Expedition, and both jobs are smaller than a full wrap. The roof on this SUV is a large, tall panel that needs a platform, and a roof-only wrap is a standard contrast option. The hood is a single large panel that can be removed or wrapped on the car, and many customers choose the hood as a first partial job. Mirror caps are also offered as a small partial wrap, and they are the fastest part to cover.

Is an Expedition hard to wrap?

An Expedition is more work than a small car because the body is very tall, with the roof up to 77.6 in (1,971 mm) high on the second generation. The roof must be wrapped from a platform, which adds setup time and makes full access harder. The tailgate has the rear glass set into it, so the film must be trimmed exactly to the edge of the glass, and the long side panels take careful handling. All generations are five-door SUVs with large flat surfaces, which are straightforward to wrap if the installer can reach them.

How many generations of the Expedition does this page cover?

This page covers five generations of the Ford Expedition, from the first model in 1996 through the current fifth generation that began in 2024. The generations are listed individually with their production years, body lengths, and film estimates. The current fifth generation runs from 2024 to the present, and the fourth generation from 2017 overlaps with it for a couple of years. Together they span the entire production history of this full-size SUV.