Wraps by car

Ford GT wrap

This page covers the Ford GT wrap for both generations, the 2005–2006 coupe and the 2016–now coupe. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If you want chrome or patterned film, plan for about 54 ft (16.5 m). The two generations differ in length and film needs, and each is detailed below.

2generations14.5 mof film for a full wrap

Ford GT, second generation, factory photo
Ford GT, second generation. Factory color shown.

Ford GT wrap colors and ideas

  • Ford GT black wrap
  • Ford GT white wrap
  • Ford GT gray wrap
  • Ford GT silver wrap
  • Ford GT red wrap
  • Ford GT blue wrap
  • Ford GT green wrap
  • Ford GT yellow wrap
  • Ford GT orange wrap
  • Ford GT purple wrap
  • Ford GT pink wrap
  • Ford GT teal wrap
  • Ford GT brown wrap
  • Ford GT gold wrap
  • Ford GT chrome wrap
  • Ford GT color shift wrap
  • Ford GT carbon fiber wrap
  • Ford GT camo and patterned wrap

How much vinyl to wrap a Ford GT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–nowcoupe (2 doors)187.5 in (4,763 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
2005–2006coupe (2 doors)182.8 in (4,643 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Ford GT wrap cost factors

The Ford GT wrap cost depends on film type, coverage and panel count. A full color change wrap needs about 48 ft (14.5 m) of cast film on the newest body, or about 46 ft (14 m) on the first generation. Chrome or patterned film adds material because pattern matching wastes film on this car's many curves. Every job is priced by the shop after the car is measured and the film choice is confirmed.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Ford GT wraps by generation

Swipe sideways. Tap a card for the full description.

Ford GT, second generation, factory photo
Factory color shown

2016–now Ford GT coupe (second generation)

2016–nowcoupe (2 doors)187.5 in (4,763 mm)

The second-generation Ford GT is a 187.5 in (4,763 mm) two-door coupe that wraps with about 48 ft (14.5 m) of 60-inch cast film. The body has long side doors that are each one large panel, so the wrap breaks into fewer pieces than most cars. The low roof and wide haunches need film stretched over compound curves, which takes more working time per panel. A chrome or patterned wrap needs about 54 ft (16.5 m) to match patterns on the doors and quarters.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Ford GT, first generation, factory photo
Factory color shown

2005–2006 Ford GT coupe (first generation)

2005–2006coupe (2 doors)182.8 in (4,643 mm)

The first-generation Ford GT from 2005–2006 is a 182.8 in (4,643 mm) two-door coupe that needs about 46 ft (14 m) of cast film for a full wrap. Chrome or patterned film takes about 57 ft (17.5 m) because the clamshell panels and door shapes force more waste in matching. Paint on these years may be original or repainted, so a test spot of vinyl on each panel checks paint adhesion before a full wrap. The two long doors are each one large piece of film, so they come off for clean edges.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Ford GT

A partial wrap on a Ford GT can cover the roof, hood or mirror caps as separate jobs. A chrome delete covers the window trim and badges with black film for a stealth look. Paint protection film (PPF) as clear film on the front end guards against chips without changing the color. Each of these jobs uses less film than a full wrap and focuses on the highest-wear areas of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford GT: body, cut-outs and film

A Ford GT vinyl wrap means covering a compact two-door coupe with long doors and a low roof. The 2016–now model is 187.5 in (4,763 mm) long, while the 2005–2006 car is 182.8 in (4,643 mm) long. Both bodies are aerodynamic with few flat panels, so every panel must be stretched carefully over curves. The two long side doors are each one large piece of film, which adds install time but gives clean seams.

Ford GT wrap ideas usually start with cut-outs for door handles, mirrors, lights, badges, vents and the fuel filler. The two long side doors come off for a cleaner wrap, because each door is one large piece of film that tucks better with the door removed. The rear wing and front splitter are best wrapped off the car to avoid seams in visible areas. The low nose and wide rockers need extra film overlap for stone chips.

How much vinyl to wrap a Ford GT changes between the two generations. The first generation needs about 46 ft (14 m) of cast film, but chrome or patterned film takes about 57 ft (17.5 m). The second generation needs about 48 ft (14.5 m) of cast film, or about 54 ft (16.5 m) in chrome or patterned film. The older car is shorter, but its clamshell front and rear sections have more surface area to cover, so patterned film uses more material.

Questions about wrapping a Ford GT

How much vinyl does it take to wrap a Ford GT?

A full Ford GT wrap takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl on the newest body. Chrome or patterned film adds about 6 ft (2 m) more for pattern matching. The first generation needs slightly less cast film at 46 ft (14 m) but more patterned film at 57 ft (17.5 m).

Can I wrap only the hood or the roof of a Ford GT?

Yes, you can wrap only the hood or the roof of a Ford GT. A partial wrap can cover the roof, hood, or mirror caps as separate jobs. A chrome delete is another partial option that covers window trim and badges, and paint protection film on the front end is a clear partial wrap. The shop will measure each panel and cut film to fit.

Is a Ford GT hard to wrap?

Yes, a Ford GT is hard to wrap because of its size and door design. The two long side doors are each one large piece of film, so each door must be handled carefully to avoid wrinkles. The body is low and wide with compound curves on the fenders and roof, which makes stretching film slower than on a flat panel. Removing the doors gives cleaner edges but adds labor time.

How many generations of the Ford GT does this page cover?

This page covers two generations of the Ford GT. The first generation is the 2005–2006 coupe, and the second generation is the 2016–now coupe. Both are two-door sports cars, but the newer car is longer and needs a bit more film.