Wraps by car

Ford Fiesta ST wrap

The Ford Fiesta ST wrap page covers all three generations of this subcompact hot hatch. A full vinyl wrap of the newest seventh-generation body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 9 ft (2.5 m) to that estimate.

3generations16 mof film for a full wrap

Ford Fiesta ST, seventh generation, factory photo
Ford Fiesta ST, seventh generation. Factory color shown.

Ford Fiesta ST wrap colors and ideas

  • Fiesta ST black wrap
  • Fiesta ST white wrap
  • Fiesta ST gray wrap
  • Fiesta ST silver wrap
  • Fiesta ST red wrap
  • Fiesta ST blue wrap
  • Fiesta ST green wrap
  • Fiesta ST yellow wrap
  • Fiesta ST orange wrap
  • Fiesta ST purple wrap
  • Fiesta ST pink wrap
  • Fiesta ST teal wrap
  • Fiesta ST brown wrap
  • Fiesta ST gold wrap
  • Fiesta ST chrome wrap
  • Fiesta ST color shift wrap
  • Fiesta ST carbon fiber wrap
  • Fiesta ST camo and patterned wrap

How much vinyl to wrap a Ford Fiesta ST

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowhatchback (3 or 5 doors)160.2 in (4,068 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
2013–2018hatchback (3 or 5 doors)156.5 in (3,975 mm) to 159.7 in (4,056 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
2004–2008hatchback (3 doors)154.2 in (3,917 mm) to 154.5 in (3,924 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Fiesta ST wrap cost factors

Fiesta ST wrap cost depends on the generation, the amount of film, and the labor for specific details. The seventh-generation car uses about 52 ft (16 m) of vinyl, while the sixth generation needs 46 ft (14 m). On the sixth generation, every trim has parking sensors and fog lamps, so installers must cut around those parts. A chrome delete or a partial wrap on the roof and hood will use less film than a full color change.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2021: bumpers and lights differ between the versions, and so do the film cuts.

Fiesta ST wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Fiesta ST, seventh generation, factory photo
Factory color shown

2018–now Fiesta ST hatchback (seventh generation)

2018–nowhatchback (3 or 5 doors)160.2 in (4,068 mm)

The 2021 restyling of the seventh-generation Ford Fiesta ST changed the bumpers and lights. Film cut for the pre-restyle 2018–2021 version does not fit the post-restyle 2021–now version. If you order pre-cut pieces, match the production year of your car to the correct pattern.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Ford Fiesta ST, sixth generation, factory photo
Factory color shown

2013–2018 Fiesta ST hatchback (sixth generation)

2013–2018hatchback (3 or 5 doors)156.5 in (3,975 mm) to 159.7 in (4,056 mm)

The sixth-generation Ford Fiesta ST measures 156.5 in (3,975 mm) to 159.7 in (4,056 mm) as a three- or five-door hatchback. Its smaller size means a full wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film, the lowest estimate of the three generations. The body has a tailgate with rear glass, parking sensors, and fog lamps, so the number of separate panels is higher than a plain hatch would suggest.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Ford Fiesta ST, fifth generation, factory photo
Factory color shown

2004–2008 Fiesta ST hatchback (fifth generation)

2004–2008hatchback (3 doors)154.2 in (3,917 mm) to 154.5 in (3,924 mm)

Paint age is a key concern on a fifth-generation Ford Fiesta ST from 2004–2008. Panels may be original or repainted, and adhesion can differ between them. A test spot on each panel comes before a full wrap. The body has two long side doors, so each door is wrapped as one large piece of film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Fiesta ST

A partial wrap on a Ford Fiesta ST can cover the roof, hood, and mirror caps. A Fiesta ST chrome delete means covering window trim and badges with black film. Paint protection film (PPF) is also common as a clear film on the front end. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Fiesta ST: body, cut-outs and film

The Ford Fiesta ST vinyl wrap job is shaped by the car's compact hatchback body. The seventh-generation model is 160.2 in (4,068 mm) long with three or five doors, so a standard color change wrap needs about 52 ft (16 m) of film. The sixth generation is slightly shorter at 156.5 in (3,975 mm) to 159.7 in (4,056 mm), which brings the estimate down to 46 ft (14 m). The fifth generation from 2004–2008 sits at 154.2 in (3,917 mm) to 154.5 in (3,924 mm) and typically takes 51 ft (15.5 m).

Fiesta ST wrap ideas must account for the tailgate, because the rear glass is set into it. On every generation, the film ends at the edge of the glass, so a full tailgate wrap is not a single rectangle. The sixth-generation cars add parking sensors in the bumpers, and the film is cut around each sensor. That generation also has fog lamps in the front bumper, which need cut-outs in the bumper film.

If you are figuring out how much vinyl to wrap a Fiesta ST, the answer changes by generation. The seventh-generation car calls for about 52 ft (16 m), while the sixth generation needs only 46 ft (14 m). The older fifth generation falls in between at 51 ft (15.5 m), even though it has only three doors. For chrome or patterned film, add 5 to 9 ft (1.5 to 2.5 m) depending on the generation.

Questions about wrapping a Ford Fiesta ST

How much vinyl does it take to wrap a Ford Fiesta ST?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a seventh-generation Ford Fiesta ST. The estimate assumes a full color change wrap on the standard hatchback body. Chrome or patterned film raises the amount to about 61 ft (18.5 m).

Which years of the Fiesta ST take the same film cuts?

The 2018–now seventh-generation Fiesta ST has a restyling in 2021, so 2018–2021 cars take different bumper and light cuts than 2021–now cars. The sixth generation runs 2013–2018 with no mid-cycle restyling, so all years share the same cuts. The fifth generation had a restyling in 2005, so 2004 cars differ from 2005–2008 cars.

Can I wrap only the hood or the roof of a Fiesta ST?

Yes, you can wrap only the hood or the roof of a Ford Fiesta ST. A partial wrap typically includes the roof, hood, and mirror caps. It uses less film and labor than a full wrap. A chrome delete on window trim and badges is another smaller job.

Is a Fiesta ST hard to wrap?

A Ford Fiesta ST is not the hardest car to wrap, but a few details add work. The tailgate has rear glass, so the film must end at the glass edge on every generation. The sixth generation has parking sensors and fog lamps that require cut-outs. The fifth generation has two long side doors, each wrapped as one large piece.