Wraps by car

Ford Edge wrap

The Ford Edge wrap section covers both generations of this SUV, the 2015–now second generation and the 2006–2015 first generation. A full vinyl wrap of the newest Edge body uses about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same body takes about 69 ft (21 m).

2generations17 mof film for a full wrap

Ford Edge, second generation, factory photo
Ford Edge, second generation. Factory color shown.

Ford Edge wrap colors and ideas

  • Edge black wrap
  • Edge white wrap
  • Edge gray wrap
  • Edge silver wrap
  • Edge red wrap
  • Edge blue wrap
  • Edge green wrap
  • Edge yellow wrap
  • Edge orange wrap
  • Edge purple wrap
  • Edge pink wrap
  • Edge teal wrap
  • Edge brown wrap
  • Edge gold wrap
  • Edge chrome wrap
  • Edge color shift wrap
  • Edge carbon fiber wrap
  • Edge camo and patterned wrap

How much vinyl to wrap a Ford Edge

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowSUV (5 doors)188.1 in (4,778 mm) to 192.0 in (4,878 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2006–2015SUV (5 doors)184.2 in (4,679 mm) to 185.7 in (4,717 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Edge wrap cost factors

Edge wrap cost depends on the amount of film, the number of cut-outs, and how many parts come off the body. The second generation needs about 56 ft (17 m) of cast film, and the first generation needs about 64 ft (19.5 m). A panoramic glass roof on the second generation reduces the roof film area. Parking sensors, cameras, fog lamps, and a styling kit on some trims add cut-outs and separate pieces.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Edge wraps by generation

Swipe sideways. Tap a card for the full description.

Ford Edge, second generation, factory photo
Factory color shown

2015–now Edge SUV (second generation)

2015–nowSUV (5 doors)188.1 in (4,778 mm) to 192.0 in (4,878 mm)

The second generation Ford Edge, built from 2015 onward, has a panoramic glass roof on every trim, and the glass is not wrapped. This means the roof stays dark whatever the color of the film chosen for the rest of the body. The roof film ends at the roof rails, and a sunroof on some trims is cut around its opening. A restyling in 2018 changed the front and rear styling, but the body length remains from 188.1 in (4,778 mm) to 192.0 in (4,878 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.7 in (1,770 mm)): the roof is wrapped from a platform.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Ford Edge, first generation, factory photo
Factory color shown

2006–2015 Edge SUV (first generation)

2006–2015SUV (5 doors)184.2 in (4,679 mm) to 185.7 in (4,717 mm)

The first generation Ford Edge, built from 2006 to 2015, needs a paint check before a full wrap because panels of these years may be original or repainted. A test spot is the safe way to see how the film sticks to the surface. A restyling in 2010 split the generation into early and late front and rear designs, but the body length stays from 184.2 in (4,679 mm) to 185.7 in (4,717 mm). Some trims have a sunroof or roof rails that affect the roof wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Edge

A partial wrap on a Ford Edge can cover the hood, mirror caps, and tailgate. A chrome delete covers the window trim, decorative moldings, and badges. Clear paint protection film (PPF) on the front end protects the hood, bumper, fenders, and mirror backs from stone chips.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Ford Edge: body, cut-outs and film

A Ford Edge vinyl wrap covers a large five-door SUV body, with a length from 188.1 in (4,778 mm) to 192.0 in (4,878 mm) on the second generation. The tall body of 69.7 in (1,770 mm) means the roof is wrapped from a platform. The first generation is slightly shorter, from 184.2 in (4,679 mm) to 185.7 in (4,717 mm). These sizes put the Edge in the class where a wrap uses the full width of a 60-inch (1.52 m) film roll.

Edge wrap ideas often start with the tailgate, where the film ends at the edge of the rear glass set into the tailgate. Every trim of the second generation has a panoramic glass roof, so the roof film ends at the roof rails. Many trims also have parking sensors, cameras, and fog lamps in the bumpers, and the film is cut around each opening. Some trims have bright decorative moldings that stay bright unless a chrome delete covers them.

How much vinyl to wrap an Edge depends on the generation, because the second generation body is longer than the first. The second generation uses about 56 ft (17 m) of cast film, while the first generation uses about 64 ft (19.5 m). Chrome or patterned film adds about 13 ft (4 m) to the first generation and about 13 ft (4 m) to the second generation. A restyling in 2018 changed the second generation body slightly, and the first generation was restyled in 2010.

Questions about wrapping a Ford Edge

How much vinyl does it take to wrap a Ford Edge?

A full wrap of the newest Ford Edge body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the same body takes about 69 ft (21 m).

Can the roof of an Edge be wrapped?

Yes, the roof of an Edge can be wrapped, but every trim of the second generation has a panoramic glass roof that is not wrapped. The film ends at the roof rails. Some trims of the first generation have a sunroof, and the roof film is cut around its opening.

Which years of the Edge take the same film cuts?

The same film cuts fit the 2015–now Edge from 2015 to 2018 and the restyled body from 2018 onward, but the cuts are not identical across the restyling. The first generation has the same cuts from 2006 to 2010 and the restyled body from 2010 to 2015.

Can I wrap only the hood or the roof of an Edge?

Yes, you can wrap only the hood or the roof of an Edge. A partial wrap can cover the hood, mirror caps, and tailgate. The roof is wrapped alone, and on the second generation the glass roof is left unwrapped.