Wraps by car

GAC Trumpchi E9 wrap

The GAC Trumpchi E9 wrap covers this full-size van in a single generation, the first generation running from 2023 to now. A complete color change wrap on the body takes about 79 ft (24 m) of 60-inch (1.52 m) cast vinyl wrap. A chrome or patterned film needs about 89 ft (27 m) because of extra material for the bright trim and design matching.

1generations24 mof film for a full wrap

GAC Trumpchi E9, first generation, factory photo
GAC Trumpchi E9, first generation. Factory color shown.

GAC Trumpchi E9 wrap colors and ideas

  • Trumpchi E9 black wrap
  • Trumpchi E9 white wrap
  • Trumpchi E9 gray wrap
  • Trumpchi E9 silver wrap
  • Trumpchi E9 red wrap
  • Trumpchi E9 blue wrap
  • Trumpchi E9 green wrap
  • Trumpchi E9 yellow wrap
  • Trumpchi E9 orange wrap
  • Trumpchi E9 purple wrap
  • Trumpchi E9 pink wrap
  • Trumpchi E9 teal wrap
  • Trumpchi E9 brown wrap
  • Trumpchi E9 gold wrap
  • Trumpchi E9 chrome wrap
  • Trumpchi E9 color shift wrap
  • Trumpchi E9 carbon fiber wrap
  • Trumpchi E9 camo and patterned wrap

How much vinyl to wrap a GAC Trumpchi E9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowvan (4 doors)205.2 in (5,212 mm)about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m)

Trumpchi E9 wrap cost factors

A Trumpchi E9 wrap cost depends on how much of the body is covered and which film is used. A full wrap needs about 79 ft (24 m) of cast film, while chrome or patterned film uses about 89 ft (27 m). The tall roof and sliding door cut-outs add labor time, so a wrap on this van is priced higher than on a smaller car.

  • Film for a full wrap: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (71.8 in (1,823 mm)): the roof is wrapped from a platform.

Trumpchi E9 wraps by generation

Swipe sideways. Tap a card for the full description.

GAC Trumpchi E9, first generation, factory photo
Factory color shown

2023–now Trumpchi E9 van (first generation)

2023–nowvan (4 doors)205.2 in (5,212 mm)

The first generation GAC Trumpchi E9 wrap has sliding side doors, and the tracks stay bare to decide where the film is cut. These tracks create a natural stop line for the vinyl on the lower body. Because the door slides into the body, the film cannot wrap around the door edge like on a regular swing door.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.8 in (1,823 mm)): the roof is wrapped from a platform.

Film: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m).

Roof, hood, chrome delete and PPF on a Trumpchi E9

A partial wrap on the Trumpchi E9 can cover the roof, hood, or mirror caps instead of the whole body. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF), a clear film, is often used on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a GAC Trumpchi E9: body, cut-outs and film

A GAC Trumpchi E9 vinyl wrap has to handle a long 205.2 in (5,212 mm) van body with four doors and a tall roof. The large side panels are fairly flat, which helps the film lay down cleanly. The height of 71.8 in (1,823 mm) means the roof area adds a good amount of film, so a full wrap uses more vinyl than a shorter vehicle.

Trumpchi E9 wrap ideas work around the sliding side doors, where the door tracks stay bare and the film is cut along them. The tall body means the roof is wrapped from a platform for safe and even access. Door handles, mirrors, and badges are removed where possible so the film can be tucked for a neat edge.

When counting how much vinyl to wrap a Trumpchi E9, this model has only one generation, the first generation, so the size stays the same for all 2023 and newer vans. The estimate for a full wrap is about 79 ft (24 m) of 60-inch (1.52 m) cast film. A chrome or patterned film takes about 89 ft (27 m) because of extra waste on the trim and pattern alignment.

Questions about wrapping a GAC Trumpchi E9

How much vinyl does it take to wrap a GAC Trumpchi E9?

A full GAC Trumpchi E9 wrap takes about 79 ft (24 m) of 60-inch (1.52 m) cast vinyl wrap. For chrome or patterned film, count on about 89 ft (27 m) to allow for extra trim pieces and pattern matching.

Are the sliding doors of a Trumpchi E9 wrapped?

The sliding doors themselves are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can still slide freely. The track area is a guide for where the vinyl stops on the body.

Can I wrap only the hood or the roof of a Trumpchi E9?

Yes, you can wrap only the hood or the roof of a Trumpchi E9. A partial wrap can cover the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges. A clear paint protection film (PPF) is another option to protect just the front end.

Is a Trumpchi E9 hard to wrap?

A Trumpchi E9 is not the easiest van to wrap because of its tall body and sliding doors. The roof is high enough that it must be wrapped from a platform, which slows the work. The sliding door tracks must be left bare and the film cut precisely along them, and the large body panels require careful handling of the long vinyl sheets.