Wraps by car

GAC Trumpchi Empow wrap

This GAC Trumpchi Empow wrap page covers the first generation of the sedan produced from 2021 to now. A full vinyl wrap of this car needs about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, plan for about 66 ft (20 m). The page also explains partial wrap options and what affects the cost.

1generations16 mof film for a full wrap

GAC Trumpchi Empow, first generation, factory photo
GAC Trumpchi Empow, first generation. Factory color shown.

GAC Trumpchi Empow wrap colors and ideas

  • Trumpchi Empow black wrap
  • Trumpchi Empow white wrap
  • Trumpchi Empow gray wrap
  • Trumpchi Empow silver wrap
  • Trumpchi Empow red wrap
  • Trumpchi Empow blue wrap
  • Trumpchi Empow green wrap
  • Trumpchi Empow yellow wrap
  • Trumpchi Empow orange wrap
  • Trumpchi Empow purple wrap
  • Trumpchi Empow pink wrap
  • Trumpchi Empow teal wrap
  • Trumpchi Empow brown wrap
  • Trumpchi Empow gold wrap
  • Trumpchi Empow chrome wrap
  • Trumpchi Empow color shift wrap
  • Trumpchi Empow carbon fiber wrap
  • Trumpchi Empow camo and patterned wrap

How much vinyl to wrap a GAC Trumpchi Empow

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowsedan (4 doors)185.0 in (4,700 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Trumpchi Empow wrap cost factors

Trumpchi Empow wrap cost depends on the film type, the number of panels, and the labor needed for cut-outs. A standard color change on this sedan uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds waste because the pattern must be matched, raising the amount to about 66 ft (20 m). The cost also changes with partial jobs like a roof wrap or chrome delete.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

Trumpchi Empow wraps by generation

Swipe sideways. Tap a card for the full description.

GAC Trumpchi Empow, first generation, factory photo
Factory color shown

2021–now Trumpchi Empow sedan (first generation)

2021–nowsedan (4 doors)185.0 in (4,700 mm)

The first generation GAC Trumpchi Empow is a four-door sedan with a total length of 185.0 in (4,700 mm). A full wrap on this body needs about 52 ft (16 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) for chrome or patterned film. The sedan shape means the doors and quarter panels are large, but the trunk and hood are straightforward to cover. The roof is a single panel, so it does not add extra film beyond the standard estimate.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Trumpchi Empow

Partial wrap options for the Trumpchi Empow include the roof, hood, and mirror caps as individual jobs. Chrome delete on this car covers the window trim and badges with black film instead of bright trim. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can change the look without covering the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a GAC Trumpchi Empow: body, cut-outs and film

A GAC Trumpchi Empow vinyl wrap starts with a four-door sedan body that is 185.0 in (4,700 mm) long. The number of panels is standard for a sedan: four doors, two bumpers, hood, trunk, roof, and both fenders. The roofline is smooth, so the roof and pillars do not add extra seams. The rear quarter panels flow into the rear bumper, which helps keep panel joins clean.

Trumpchi Empow wrap ideas include a full color change, a two-tone design, or a satin finish over the original paint. The front grille, door handles, and badges need careful cut-outs, and the mirror caps come off for a cleaner edge. The roof antenna and the trim behind the rear doors also need film trimmed around them. Removing the door handles and tail lights makes the wrap neater, but a good installer can wrap around them without removal.

How much vinyl to wrap a Trumpchi Empow depends mainly on the film pattern and the body length of 185.0 in (4,700 mm). The first generation runs from 2021 to now, so all cars on this page share the same sedan shape. There are no major body changes between years that would change the panel count. Some trim pieces may differ slightly, but the base car is the same size.

Questions about wrapping a GAC Trumpchi Empow

How much vinyl does it take to wrap a GAC Trumpchi Empow?

Yes, a full GAC Trumpchi Empow wrap takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, you will need about 66 ft (20 m) because the pattern must be matched across panels. These figures cover the first generation sedan produced from 2021 to now.

Can I wrap only the hood or the roof of a Trumpchi Empow?

Yes, you can wrap only the hood or the roof of a Trumpchi Empow. The partial wrap options on this page list the roof, hood, and mirror caps as separate jobs. A roof wrap on this sedan covers one large panel and does not need extra film for complex curves.

Is a Trumpchi Empow hard to wrap?

The Trumpchi Empow is not especially hard to wrap, but the front grille and door handles add work for cut-outs. The body is 185.0 in (4,700 mm) long, so a full wrap takes more film than a smaller car. The roof antenna and the trim behind the rear doors also need careful trimming. Removing the mirror caps and door handles makes the job faster and cleaner.

How many generations of the Trumpchi Empow does this page cover?

This page covers one generation of the Trumpchi Empow. The first generation runs from 2021 to now, and all cars share the same four-door sedan body.