A Borui GE wrapped in blue starts with choosing a finish that matches how you see the car. Matte and satin films soften reflections and show the body lines clearly, while gloss films add depth and a wet look. A full body color change covers the roof, pillars and door shuts, but door jambs stay in the factory paint unless you ask for them to be done. A blue wrap is also a good base for a chrome delete or partial accents.
The factory paint under a blue wrap should be checked for chips and deep scratches before the film goes on. A wrap hides small marks but every chip can show through as a bump, so a good prep makes the finish cleaner. Seams are needed where the film ends on each panel, and the installer places them along natural edges or body lines. The Borui GE has a smooth body with few sharp creases, so the blue wrap can be laid with clean seams.
A blue wrap on the Borui GE is removable when the film is in good shape and the paint was prepared correctly. Hand washing with a soft mitt and pH-neutral soap keeps the edges down and the finish clean. Avoid automatic brushes and pressure washers aimed at the edges. If you want to remove the wrap later, warm the film with a heat gun and pull slowly at a low angle.