Wraps by car

GMC Hummer EV wrap

The GMC Hummer EV wrap page covers the first generation of this electric SUV and pickup. This generation has one body generation from 2021 to the present. A full wrap of the newest body takes about 76 ft (23 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 85 ft (26 m).

1generations23 mof film for a full wrap

GMC Hummer EV, first generation, factory photo
GMC Hummer EV, first generation. Factory color shown.

GMC Hummer EV wrap colors and ideas

  • Hummer EV black wrap
  • Hummer EV white wrap
  • Hummer EV gray wrap
  • Hummer EV silver wrap
  • Hummer EV red wrap
  • Hummer EV blue wrap
  • Hummer EV green wrap
  • Hummer EV yellow wrap
  • Hummer EV orange wrap
  • Hummer EV purple wrap
  • Hummer EV pink wrap
  • Hummer EV teal wrap
  • Hummer EV brown wrap
  • Hummer EV gold wrap
  • Hummer EV chrome wrap
  • Hummer EV color shift wrap
  • Hummer EV carbon fiber wrap
  • Hummer EV camo and patterned wrap

How much vinyl to wrap a GMC Hummer EV

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV, pickup (4 or 5 doors)216.8 in (5,507 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Hummer EV wrap cost factors

Hummer EV wrap cost depends on body style, film choice, and the amount of disassembly. The 216.8 in (5,507 mm) length and two body styles affect labor time. Chrome or patterned film needs about 85 ft (26 m) instead of 76 ft (23 m). A pickup bed adds a second body to wrap, so the job takes more film and more time.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: SUV, pickup (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Hummer EV wraps by generation

Swipe sideways. Tap a card for the full description.

GMC Hummer EV, first generation, factory photo
Factory color shown

2021–now Hummer EV SUV, pickup (first generation)

2021–nowSUV, pickup (4 or 5 doors)216.8 in (5,507 mm)

The first-generation GMC Hummer EV has a pickup bed that changes the wrap process. The cab and the bed are treated as two bodies for the film. The inside of the bed stays bare, so the installer does not wrap that surface. This generation spans 2021 to the present in SUV and pickup styles.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Hummer EV

A partial wrap on a Hummer EV can cover the roof, hood, and mirror caps. Hummer EV chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs protect key areas without wrapping the whole vehicle.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a GMC Hummer EV: body, cut-outs and film

A GMC Hummer EV vinyl wrap must handle a large 216.8 in (5,507 mm) body. The SUV and pickup styles, each with four or five doors, require careful film planning. The size means installers often split the job into sections. The tailgate glass and pickup bed edges are natural stopping points.

Several Hummer EV wrap ideas start with the tailgate, which has the rear glass set into it. The film ends at the edge of that glass to keep the wrap clean. On the pickup, the cab and the bed are wrapped as two separate bodies. The inside of the bed stays unwrapped, and the charge port door is a small piece of its own.

When counting how much vinyl to wrap a Hummer EV, the pickup bed changes the math. The cab and the bed are treated as two bodies for the film. The extra body seams and the tailgate mean the pickup uses more material than the SUV. Both styles share the same generation, so the film estimate applies to 2021 and newer vehicles.

Questions about wrapping a GMC Hummer EV

How much vinyl does it take to wrap a GMC Hummer EV?

It takes about 76 ft (23 m) of 60-inch (1.52 m) cast film to wrap a GMC Hummer EV. Chrome or patterned film raises the estimate to about 85 ft (26 m). The figure applies to the newest body of the first generation.

Is the bed of a Hummer EV wrapped?

No, the inside of the bed of a Hummer EV is not wrapped. The cab and the bed are wrapped as two bodies, but the inside of the bed stays bare.

Which Hummer EV body takes more film?

The pickup body takes more film than the SUV body of the Hummer EV. The pickup bed adds a second body to wrap, increasing the total film needed.

Can I wrap only the hood or the roof of a Hummer EV?

Yes, you can wrap only the hood or the roof of a Hummer EV. A partial wrap covers the roof, hood, and mirror caps, while chrome delete handles window trim and badges. Paint protection film (PPF) is clear film for the front end.