Wraps by car

GMC Terrain wrap

A GMC Terrain wrap covers the SUV in a full sheet of cast vinyl film. The catalog lists two generations of the Terrain: the first from 2009 to 2017 and the second from 2017 to now. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

2generations19 mof film for a full wrap

GMC Terrain, second generation, factory photo
GMC Terrain, second generation. Factory color shown.

GMC Terrain wrap colors and ideas

  • Terrain black wrap
  • Terrain white wrap
  • Terrain gray wrap
  • Terrain silver wrap
  • Terrain red wrap
  • Terrain blue wrap
  • Terrain green wrap
  • Terrain yellow wrap
  • Terrain orange wrap
  • Terrain purple wrap
  • Terrain pink wrap
  • Terrain teal wrap
  • Terrain brown wrap
  • Terrain gold wrap
  • Terrain chrome wrap
  • Terrain color shift wrap
  • Terrain carbon fiber wrap
  • Terrain camo and patterned wrap

How much vinyl to wrap a GMC Terrain

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowSUV (5 doors)182.3 in (4,630 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2009–2017SUV (5 doors)185.3 in (4,707 mm) to 187.8 in (4,771 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Terrain wrap cost factors

Terrain wrap cost depends on the size of the vehicle, the film material, and the labor for cut-outs and disassembly. The second generation is 182.3 in (4,630 mm) long and the first generation is up to 187.8 in (4,771 mm) long, so more film is needed for larger bodies. Some trims have roof rails, parking sensors, and cameras that add time to the wrap process. A full wrap also uses more film than a partial wrap or chrome delete.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Restyled in 2021: bumpers and lights differ between the versions, and so do the film cuts.

Terrain wraps by generation

Swipe sideways. Tap a card for the full description.

GMC Terrain, second generation, factory photo
Factory color shown

2017–now Terrain SUV (second generation)

2017–nowSUV (5 doors)182.3 in (4,630 mm)

The second generation GMC Terrain started in 2017 and continues now, with a restyling in 2021. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. Installers must choose the correct pattern for the 2017–2020 or 2021–now version.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

GMC Terrain, first generation, factory photo
Factory color shown

2009–2017 Terrain SUV (first generation)

2009–2017SUV (5 doors)185.3 in (4,707 mm) to 187.8 in (4,771 mm)

The first generation GMC Terrain was produced from 2009 to 2017, with a restyling in 2015. Paint age is a key factor on a car of these years because panels may be original or repainted. A test spot comes before a full wrap to check that the film adheres properly to the existing paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Terrain

A partial wrap on a GMC Terrain covers selected areas like the roof, hood, or mirror caps. A Terrain chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a GMC Terrain: body, cut-outs and film

A GMC Terrain vinyl wrap follows the five-door SUV silhouette of both generations. The second generation measures 182.3 in (4,630 mm) long, and the first generation ranges from 185.3 in (4,707 mm) to 187.8 in (4,771 mm). These sizes are typical for a midsize SUV, so the film estimate includes large panels like the doors and roof. A wrap installer works from the front bumper to the tailgate to cover every painted surface.

Terrain wrap ideas account for the tailgate with rear glass in it, because the film ends at the edge of the glass. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Some trims have parking sensors in the bumpers, and the film is cut around each sensor. Some trims have cameras in the body, and the film is cut around each lens.

How much vinyl to wrap a Terrain depends on the generation and the film type. The first generation needs about 64 ft (19.5 m) of 60-inch (1.52 m) cast film, while the second generation needs about 62 ft (19 m). Chrome or patterned film increases the amount to about 72 ft (22 m) for the first generation and about 69 ft (21 m) for the second. Counting film before a wrap starts with these figures and then adds waste for cuts and mistakes.

Questions about wrapping a GMC Terrain

How much vinyl does it take to wrap a GMC Terrain?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a GMC Terrain. This figure is for the newest body, the second generation from 2017 to now. Chrome or patterned film requires about 69 ft (21 m) on the same body.

Which years of the Terrain take the same film cuts?

The same film cuts fit within each version of a generation, so from 2009 to 2015 for the first generation and 2015 to 2017 after its restyling. For the second generation, 2017 to 2020 and 2021 to now use the same cuts within each period. The restyling years 2015 and 2021 changed the body panels, so cuts differ between the periods.

Can I wrap only the hood or the roof of a Terrain?

Yes, you can wrap only the hood or the roof of a Terrain as a partial wrap. A partial wrap also includes options like mirror caps. A chrome delete covers only the window trim and badges.

Is a Terrain hard to wrap?

A Terrain is not hard to wrap for an experienced installer, but some parts add work. The tailgate has rear glass in it, so the film ends at the edge of the glass. Some trims have roof rails, parking sensors, and cameras that require cut-outs or removal.