Wraps by car

Hawtai Boliger wrap

The Hawtai Boliger wrap page covers the first-generation SUV made from 2011 to 2020. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film.

1generations19 mof film for a full wrap

Hawtai Boliger, first generation, factory photo
Hawtai Boliger, first generation. Factory color shown.

Hawtai Boliger wrap colors and ideas

  • Boliger black wrap
  • Boliger white wrap
  • Boliger gray wrap
  • Boliger silver wrap
  • Boliger red wrap
  • Boliger blue wrap
  • Boliger green wrap
  • Boliger yellow wrap
  • Boliger orange wrap
  • Boliger purple wrap
  • Boliger pink wrap
  • Boliger teal wrap
  • Boliger brown wrap
  • Boliger gold wrap
  • Boliger chrome wrap
  • Boliger color shift wrap
  • Boliger carbon fiber wrap
  • Boliger camo and patterned wrap

How much vinyl to wrap a Hawtai Boliger

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2020SUV (5 doors)181.8 in (4,618 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Boliger wrap cost factors

Boliger wrap cost depends mainly on the film area of 62 ft (19 m) for a full wrap and the amount of detail work. The many cut-outs for sensors, cameras, fog lamps, and the sunroof add labor time. Chrome or patterned film also raises cost because it requires about 72 ft (22 m) of material.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (69.1 in (1,754 mm)): the roof is wrapped from a platform.

Boliger wraps by generation

Swipe sideways. Tap a card for the full description.

Hawtai Boliger, first generation, factory photo
Factory color shown

2011–2020 Boliger SUV (first generation)

2011–2020SUV (5 doors)181.8 in (4,618 mm)

The first-generation Boliger (2011–2020) has roof rails that must be removed before wrapping the roof; otherwise, the film is cut along them. This single generation came only as a five-door SUV with a length of 181.8 in (4,618 mm). Its film estimate is 62 ft (19 m) for a full wrap with standard cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.1 in (1,754 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Boliger

For smaller jobs, a partial wrap on the Boliger can cover the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also available as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Hawtai Boliger: body, cut-outs and film

The Hawtai Boliger vinyl wrap is shaped by its five-door SUV body that measures 181.8 in (4,618 mm) long. This length means a full wrap uses about 62 ft (19 m) of film, which is typical for a mid-size SUV. The tall body of 69.1 in (1,754 mm) also requires a platform to reach the roof safely.

Boliger wrap ideas start with the parts that need cut-outs or removal. Every trim has a sunroof, roof rails, parking sensors, cameras in the body, and fog lamps, so the film must be cut around each of these features. The roof rails come off before the roof is wrapped, or the film is cut along them.

How much vinyl to wrap a Boliger depends on the film type as well as the body. A standard color change wrap uses about 62 ft (19 m) of 60-inch (1.52 m) film. If you choose chrome or patterned film, plan for about 72 ft (22 m) because of extra material needed for pattern matching.

Questions about wrapping a Hawtai Boliger

How much vinyl does it take to wrap a Hawtai Boliger?

A full wrap of a Hawtai Boliger takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. That estimate is for the newest body, the first generation made from 2011 to 2020. If you use chrome or patterned film, you need about 72 ft (22 m).

Can the roof of a Boliger be wrapped?

Yes, the roof of a Boliger can be wrapped, but every trim has a sunroof that requires cutting the film around its opening. You also need a platform because the body is 69.1 in (1,754 mm) tall.

Can I wrap only the hood or the roof of a Boliger?

Yes, you can wrap only the hood or the roof of a Boliger as a partial wrap. A partial wrap typically includes the roof, hood, and mirror caps. This is a good option if you do not want a full color change.

Is a Boliger hard to wrap?

A Boliger is considered moderately hard to wrap because of its many cut-outs and tall body. Every trim has parking sensors, cameras, fog lamps, a sunroof, and roof rails, all of which need careful trimming. The roof also requires a platform due to the height of 69.1 in (1,754 mm).