Wraps by car

Hawtai Laville wrap

This page covers the Hawtai Laville wrap process for the 2017–2020 SUV. The Laville has one generation in the catalog, with a five-door body. A full wrap of the body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast vinyl wrap film.

1generations18.5 mof film for a full wrap

Hawtai Laville, first generation, factory photo
Hawtai Laville, first generation. Factory color shown.

Hawtai Laville wrap colors and ideas

  • Laville black wrap
  • Laville white wrap
  • Laville gray wrap
  • Laville silver wrap
  • Laville red wrap
  • Laville blue wrap
  • Laville green wrap
  • Laville yellow wrap
  • Laville orange wrap
  • Laville purple wrap
  • Laville pink wrap
  • Laville teal wrap
  • Laville brown wrap
  • Laville gold wrap
  • Laville chrome wrap
  • Laville color shift wrap
  • Laville carbon fiber wrap
  • Laville camo and patterned wrap

How much vinyl to wrap a Hawtai Laville

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–2020SUV (5 doors)174.3 in (4,426 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Laville wrap cost factors

The Laville wrap cost depends on the size of the SUV and the film you pick. A full wrap needs about 61 ft (18.5 m) of cast vinyl, or about 67 ft (20.5 m) for chrome or patterned film. The roof rails and parking sensors add labor because they need removal or careful cut-outs. A partial job on the roof, hood, or mirror caps uses less film and time.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Laville wraps by generation

Swipe sideways. Tap a card for the full description.

Hawtai Laville, first generation, factory photo
Factory color shown

2017–2020 Laville SUV (first generation)

2017–2020SUV (5 doors)174.3 in (4,426 mm)

The first generation Laville, sold from 2017 to 2020, has roof rails on every trim. Before wrapping the roof, the installer takes the roof rails off for a clean edge. If you keep them on, the film is cut along each rail with a steady hand. This choice affects the finish but not the total film estimate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Laville

For a smaller job, a partial wrap on a Laville can cover the roof, hood, or mirror caps. A Laville chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These options use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Hawtai Laville: body, cut-outs and film

The Hawtai Laville vinyl wrap covers a five-door SUV measuring 174.3 in (4,426 mm) long. This single body style means one size estimate fits every Laville from 2017–2020. The roof, hood, doors, fenders, bumpers, and tailgate all receive film. Plan for the roof rails and parking sensors before cutting the vinyl.

Laville wrap ideas start with the factory details that need attention. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Every trim has roof rails, fog lamps, and parking sensors that require cut-outs or removal. A chrome delete often covers the window trim and badges in black film.

If you are counting film, how much vinyl to wrap a Laville depends on the generation. Only the 2017–2020 body exists, so the estimate stays consistent for every car. A full color change wrap needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 6 ft (2 m) to that figure.

Questions about wrapping a Hawtai Laville

How much vinyl does it take to wrap a Hawtai Laville?

A Hawtai Laville takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast vinyl wrap film for a full color change. Chrome or patterned film raises the estimate to about 67 ft (20.5 m). This figure fits the 2017–2020 SUV body with five doors.

Can I wrap only the hood or the roof of a Laville?

Yes, you can wrap only the hood or the roof of a Laville. A partial wrap often covers the roof, hood, or mirror caps as separate jobs. A chrome delete on the window trim and badges is another small option. Paint protection film can also be applied just to the front end.

Is a Laville hard to wrap?

A Laville is not the easiest wrap because of its factory details. The roof rails must come off the roof, or the film has to be cut along them. The parking sensors in the bumpers need precise cut-outs, as do the fog lamps. The SUV's 174.3 in (4,426 mm) length adds working time as well.

How many generations of the Laville does this page cover?

This page covers one generation of the Hawtai Laville. The catalog lists the first generation from 2017 to 2020 only. No other body styles or updates are included here.