Wraps by car

HiPhi X wrap

The HiPhi X wrap guide covers the first generation of the SUV, which has been in production since 2020. A full vinyl wrap of this model needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. The catalog lists one generation for the HiPhi X.

1generations21.5 mof film for a full wrap

HiPhi X, first generation, factory photo
HiPhi X, first generation. Factory color shown.

HiPhi X wrap colors and ideas

  • HiPhi X black wrap
  • HiPhi X white wrap
  • HiPhi X gray wrap
  • HiPhi X silver wrap
  • HiPhi X red wrap
  • HiPhi X blue wrap
  • HiPhi X green wrap
  • HiPhi X yellow wrap
  • HiPhi X orange wrap
  • HiPhi X purple wrap
  • HiPhi X pink wrap
  • HiPhi X teal wrap
  • HiPhi X brown wrap
  • HiPhi X gold wrap
  • HiPhi X chrome wrap
  • HiPhi X color shift wrap
  • HiPhi X carbon fiber wrap
  • HiPhi X camo and patterned wrap

How much vinyl to wrap a HiPhi X

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)204.7 in (5,200 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

HiPhi X wrap cost factors

A HiPhi X wrap cost depends on the size of the vehicle and the film chosen. The car is 204.7 in (5,200 mm) long, so a full wrap takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 80 ft (24.5 m) because of waste and matching. The labor also changes with the number of cut-outs and the pieces that need to be removed.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

HiPhi X wraps by generation

Swipe sideways. Tap a card for the full description.

HiPhi X, first generation, factory photo
Factory color shown

2020–now HiPhi X SUV (first generation)

2020–nowSUV (5 doors)204.7 in (5,200 mm)

The HiPhi X is a five-door SUV with a length of 204.7 in (5,200 mm). A full wrap needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film, or about 80 ft (24.5 m) for chrome or patterned film. The large body has more panels than a small car, so the installer spends more time on each side. The roof, the hood, the four doors and the tailgate are the main areas to wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a HiPhi X

A partial wrap on the HiPhi X can cover the roof and the hood, or just the mirror caps. A chrome delete turns the window trim and the badges black with film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done on their own.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a HiPhi X: body, cut-outs and film

A HiPhi X vinyl wrap covers a large five-door SUV body that is 204.7 in (5,200 mm) long. The high roofline and tall sides add film area compared with a lower car. The single body style means the panel count is the same for every trim. Installers plan the film layout around the long roof and the large side panels.

HiPhi X wrap ideas include cut-outs for the tailgate, where the rear glass sits in the door, so the film ends at the edge of the glass. The charge port door on this electric car is best wrapped as a small separate piece. The door handles and the front sensors are also removed or masked before the film goes on. The badges can stay off and be reapplied after the wrap.

The first generation of the HiPhi X has been built from 2020 to now, so how much vinyl to wrap a HiPhi X is the same for all years. There are no earlier or later bodies to change the panel sizes. The film estimate of about 70 ft (21.5 m) of 60-inch (1.52 m) cast film works for every production year. A wrap installer counts the same panels on a 2020 car and on a current one.

Questions about wrapping a HiPhi X

How much vinyl does it take to wrap a HiPhi X?

A full wrap of a HiPhi X takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 80 ft (24.5 m) because of extra waste. The figure covers the whole body of the first generation SUV.

Can I wrap only the hood or the roof of a HiPhi X?

Yes, a HiPhi X can be wrapped only on the hood or the roof. A partial wrap may also cover the mirror caps. A chrome delete on the window trim and badges is another small job.

Is a HiPhi X hard to wrap?

Yes, the HiPhi X is a difficult wrap because it is a large SUV at 204.7 in (5,200 mm) long. The tailgate has the rear glass in it, so the film must be cut cleanly at the edge of the glass. The charge port door of the electric car is wrapped as a small separate piece, which adds a step.

How many generations of the HiPhi X does this page cover?

This page covers one generation of the HiPhi X, the first generation. It has been produced from 2020 to now. There are no other generations in the catalog.