Wraps by car

HiPhi Z wrap

This page covers the HiPhi Z, a single-generation electric liftback produced from 2022 to now. A full HiPhi Z wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl wrap. For chrome or patterned film, plan on about 76 ft (23 m). The guide below explains the wrap process, film amounts, and common questions for this car.

1generations18 mof film for a full wrap

HiPhi Z, first generation, factory photo
HiPhi Z, first generation. Factory color shown.

HiPhi Z wrap colors and ideas

  • HiPhi Z black wrap
  • HiPhi Z white wrap
  • HiPhi Z gray wrap
  • HiPhi Z silver wrap
  • HiPhi Z red wrap
  • HiPhi Z blue wrap
  • HiPhi Z green wrap
  • HiPhi Z yellow wrap
  • HiPhi Z orange wrap
  • HiPhi Z purple wrap
  • HiPhi Z pink wrap
  • HiPhi Z teal wrap
  • HiPhi Z brown wrap
  • HiPhi Z gold wrap
  • HiPhi Z chrome wrap
  • HiPhi Z color shift wrap
  • HiPhi Z carbon fiber wrap
  • HiPhi Z camo and patterned wrap

How much vinyl to wrap a HiPhi Z

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowliftback (5 doors)198.3 in (5,036 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

HiPhi Z wrap cost factors

HiPhi Z wrap cost depends on the film type, the size of the car, and the installer's labor. The car's 198.3 in (5,036 mm) length and five-door liftback body mean a full wrap uses about 59 ft (18 m) of film. Chrome or patterned film increases material to about 76 ft (23 m). The number of cut-outs and the need to remove or work around parts also affect the final cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

HiPhi Z wraps by generation

Swipe sideways. Tap a card for the full description.

HiPhi Z, first generation, factory photo
Factory color shown

2022–now HiPhi Z liftback (first generation)

2022–nowliftback (5 doors)198.3 in (5,036 mm)

The first generation HiPhi Z was introduced in 2022 and is still in production. Its 198.3 in (5,036 mm) length makes it one of the larger sedans on the road, so installers need more film than for a compact car. The five-door liftback has a tailgate with glass that ends the wrap at the glass edge. The charge port door is wrapped separately, which adds a small extra step.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a HiPhi Z

A partial wrap on a HiPhi Z can cover just the roof, hood, and mirror caps. HiPhi Z chrome delete involves covering the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less material and time than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a HiPhi Z: body, cut-outs and film

The HiPhi Z is a large five-door liftback with a length of 198.3 in (5,036 mm). A HiPhi Z vinyl wrap covers the roof, hood, doors, fenders, quarter panels, bumpers, and tailgate. The liftback design includes the rear glass in the tailgate, so the film ends at the edge of the glass. The car's size means more film and more panels than a smaller sedan, but the smooth body lines help with installation.

HiPhi Z wrap ideas often include a full color change or a partial wrap. The tailgate has the rear glass in it, so installers cut the film at the glass edge rather than wrapping over it. The charge port door is wrapped as a small separate piece to allow the door to open freely. Other parts that need cut-outs are the sensors, cameras, and door handles.

To figure how much vinyl to wrap a HiPhi Z, note that this car has only one generation in the catalog. The first generation (2022–now) is the only body style, so film estimates stay the same for all years. A full wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, that figure rises to about 76 ft (23 m) because of the extra material needed for matching patterns.

Questions about wrapping a HiPhi Z

How much vinyl does it take to wrap a HiPhi Z?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl to wrap a HiPhi Z. If you choose chrome or patterned film, the amount goes up to about 76 ft (23 m). These figures are for the only generation in the catalog, which has been produced since 2022.

Can I wrap only the hood or the roof of a HiPhi Z?

Yes, you can wrap only the hood or the roof of a HiPhi Z. A partial wrap often includes the roof, hood, and mirror caps. This is a smaller job than a full wrap and uses less film.

Is a HiPhi Z hard to wrap?

Yes, a HiPhi Z is moderately hard to wrap because of its size and a few specific features. The tailgate has the rear glass in it, so the film must be cut precisely at the glass edge. The charge port door is wrapped as a separate small piece, which adds a step. The car's length, 198.3 in (5,036 mm), means large panels that require careful handling.

How many generations of the HiPhi Z does this page cover?

This page covers one generation of the HiPhi Z. The first generation has been produced from 2022 to now. There are no other generations in the catalog.