A color change on the Freed starts with picking the finish, then the film line, then whether to wrap the door jambs. The same gray code looks different in matte, satin, gloss, or metallic on the tall sides of this van. Your installer will cut the film along the sliding door tracks so the doors still move freely. The film estimate for a full wrap is about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.
Factory paint has to be cleaned, clayed, and checked for chips before gray film goes on the Freed. Any chip or deep scratch will show through the wrap as a mark in the color. Seams are placed at body lines and around the sliding door tracks, not across large flat areas. A good prep step keeps the new gray finish smooth on this van.
A gray wrap on the Freed is removable, so the factory paint can be brought back. Hand washing is the safest way to clean the film after the wrap is done. Pressure washing too close to edges or the door tracks can lift the film. The wrap does not change the door gaps or the way the sliding doors work.



