Wraps by car

Honda Freed wrap

The Honda Freed wrap page covers both generations of this compact minivan, the 2008–2011 first generation and the 2016–2019 second generation. A full vinyl wrap of the newest Freed body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the estimate rises to about 72 ft (22 m) because the material is cut to match the design.

2generations19.5 mof film for a full wrap

Honda Freed, second generation, factory photo
Honda Freed, second generation. Factory color shown.

Honda Freed wrap colors and ideas

  • Freed black wrap
  • Freed white wrap
  • Freed gray wrap
  • Freed silver wrap
  • Freed red wrap
  • Freed blue wrap
  • Freed green wrap
  • Freed yellow wrap
  • Freed orange wrap
  • Freed purple wrap
  • Freed pink wrap
  • Freed teal wrap
  • Freed brown wrap
  • Freed gold wrap
  • Freed chrome wrap
  • Freed color shift wrap
  • Freed carbon fiber wrap
  • Freed camo and patterned wrap

How much vinyl to wrap a Honda Freed

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2019van (5 doors)167.9 in (4,265 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2008–2011van (5 doors)165.7 in (4,210 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Freed wrap cost factors

Freed wrap cost depends on the film type, the condition of the paint, and how many parts are removed. A full print or metallic film on this 167.9 in (4,265 mm) van takes more hours than a simple color change, so labor is the biggest variable. The roof and the tall sides of the Freed also add area that a small car would not have.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Freed wraps by generation

Swipe sideways. Tap a card for the full description.

Honda Freed, second generation, factory photo
Factory color shown

2016–2019 Freed van (second generation)

2016–2019van (5 doors)167.9 in (4,265 mm)

The second generation of the Honda Freed, built from 2016 to 2019, has sliding side doors where the tracks stay bare and decide where the film is cut. The tracks are a wear area, so the film is trimmed along them rather than wrapped inside. That gives the wrap a clean line and keeps the doors sliding the way they did before the wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Honda Freed, first generation, factory photo
Factory color shown

2008–2011 Freed van (first generation)

2008–2011van (5 doors)165.7 in (4,210 mm)

The first generation of the Honda Freed, built from 2008 to 2011, often has paint age issues that affect a wrap. Panels may be original or repainted after years on the road, and a test spot tells the installer whether the old paint will hold the film. A wrap on this body starts with lower expectations for a perfect surface and more time for cleaning and prep.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Freed

A partial wrap on a Honda Freed covers a smaller job like the roof, hood, or mirror caps, or a chrome delete of the window trim and badges. Paint protection film (PPF) is another option as a clear film on the front end. These smaller jobs let you change the look without wrapping the whole 167.9 in (4,265 mm) body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Honda Freed: body, cut-outs and film

The Honda Freed vinyl wrap fits a five-door van body of 167.9 in (4,265 mm) in the second generation or 165.7 in (4,210 mm) in the first. These compact minivan sizes keep the wrap job about the same as other short vans, with the roof and tall sides as the main flat areas. Because the body is mostly straight, the film lays down with fewer relief cuts than on a curved coupe.

Freed wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The mirrors, door handles, and badges are removed or masked so the film can wrap cleanly around each part. Window trim and the rear wiper also need cut-outs, which makes the wrap lines look sharper when they are done well.

How much vinyl to wrap a Freed depends on the generation, because both share the same body style but differ slightly in length. The second generation measures 167.9 in (4,265 mm) and the first 165.7 in (4,210 mm), a difference that does not change the film estimate on its own. Anyone counting film uses about 64 ft (19.5 m) of 60-inch (1.52 m) cast vinyl for either body, plus a margin for mistakes.

Questions about wrapping a Honda Freed

How much vinyl does it take to wrap a Honda Freed?

A full wrap of a Honda Freed takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast vinyl for a standard color. Chrome or patterned film needs about 72 ft (22 m) because the material is cut to match the design. These figures cover the newest body style and a margin for panel cuts.

Are the sliding doors of a Freed wrapped?

Yes, the sliding doors of a Freed are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors keep sliding freely and no vinyl gets pinched. The tracks themselves are not covered because they are a wear and dirt area.

Can I wrap only the hood or the roof of a Freed?

Yes, you can wrap only the hood or the roof of a Freed as a partial wrap. A shop can also do the mirror caps, a chrome delete on the window trim and badges, or paint protection film (PPF) on the front end. These smaller jobs use less film than a full wrap of the 167.9 in (4,265 mm) body.

Is a Freed hard to wrap?

A Freed is not specially hard to wrap, but the sliding doors add work because the film must be cut along the bare tracks. The tall body and roof increase the area that a single installer has to reach and smooth. First-generation cars can also take more prep when old or repainted panels do not give the film a clean surface.