Wraps by car

Honda XR-V wrap

The Honda XR-V wrap page covers two generations of this subcompact SUV and the vinyl wrap needed for a full color change. The newest body, sold since 2022, takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. A chrome or patterned film wrap runs closer to 66 ft (20 m). This guide explains the film amounts, the wrap process, and the options smaller than a full wrap.

2generations18 mof film for a full wrap

Honda XR-V, second generation, factory photo
Honda XR-V, second generation. Factory color shown.

Honda XR-V wrap colors and ideas

  • XR-V black wrap
  • XR-V white wrap
  • XR-V gray wrap
  • XR-V silver wrap
  • XR-V red wrap
  • XR-V blue wrap
  • XR-V green wrap
  • XR-V yellow wrap
  • XR-V orange wrap
  • XR-V purple wrap
  • XR-V pink wrap
  • XR-V teal wrap
  • XR-V brown wrap
  • XR-V gold wrap
  • XR-V chrome wrap
  • XR-V color shift wrap
  • XR-V carbon fiber wrap
  • XR-V camo and patterned wrap

How much vinyl to wrap a Honda XR-V

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)172.4 in (4,380 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2014–2022SUV (5 doors)——

XR-V wrap cost factors

XR-V wrap cost depends on the number of panels, the film type, and the amount of disassembly the body needs. A full wrap of the 2022 body takes about 59 ft (18 m) of 60-inch cast film, and a chrome or patterned film takes about 66 ft (20 m). The bumpers, mirror caps, and door handles should come off, which adds labor. The tailgate glass is part of the tailgate, so the installer trims around it rather than wrapping over it.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

XR-V wraps by generation

Swipe sideways. Tap a card for the full description.

Honda XR-V, second generation, factory photo
Factory color shown

2022–now XR-V SUV (second generation)

2022–nowSUV (5 doors)172.4 in (4,380 mm)

The second-generation Honda XR-V is a five-door SUV that measures 172.4 in (4,380 mm) long, which makes it a straightforward vehicle to wrap. Its boxy shape keeps the roof, hood, and door panels mostly flat, so the film lays down without deep stretch zones. The tailgate with the rear glass means the installer cuts the film at the glass edge and wraps the painted area around it. A full wrap needs about 59 ft (18 m) of 60-inch cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Honda XR-V, first generation, factory photo
Factory color shown

2014–2022 XR-V SUV (first generation)

2014–2022SUV (5 doors)

The first-generation Honda XR-V is a five-door SUV from 2014 to 2022, with a shorter body than the current model. Its panel shapes are still simple, but the front and rear clips are smaller, so the film can be cut more tightly. Like the newer car, the tailgate includes the rear glass, so the film ends at the glass edge. The panel count is the same, which keeps the install time close to the second generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Roof, hood, chrome delete and PPF on an XR-V

A partial wrap on the XR-V can cover the roof, hood, or mirror caps, using much less film than a full color change. An XR-V chrome delete covers the window trim and badges with black film, which changes the look without touching large body panels. Paint protection film (PPF) on the front end is a clear wrap that covers the bumper, hood edge, and mirror caps. These smaller jobs use the same cast film and can be done without removing the bumpers.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Honda XR-V: body, cut-outs and film

A Honda XR-V vinyl wrap has to cover a five-door SUV body with a tall roof, a deep tailgate, and large bumper corners. Both generations share the same two-box profile, so the panel count stays the same, but the 2022 body is longer at 172.4 in (4,380 mm). That extra length adds film on the rear quarter panels and the lower doors. The tailgate includes the rear glass, so the film stops at the edge of the glass instead of wrapping the window frame.

XR-V wrap ideas start with the fact that the tailgate and its rear glass are one unit, so the film ends cleanly at the glass edge. The door handles, mirror caps, and roof rails should be removed for a neat install, while the front and rear bumpers come off to tuck the film. The window trim and badges need cut-outs if you do not plan a chrome delete. A color change wrap lets you cover the factory paint without touching the glass or the lights.

If you are counting how much vinyl to wrap an XR-V, the main change between the two generations is the body length. The second generation is 172.4 in (4,380 mm) long, which pushes the total to about 59 ft (18 m) of 60-inch film. The first generation shares the same five-door SUV shape, but its shorter nose and tail can bring the total down by about 3 ft (1 m). Full wrap estimates assume a plain color film, while chrome or patterned film needs about 66 ft (20 m).

Questions about wrapping a Honda XR-V

How much vinyl does it take to wrap a Honda XR-V?

A full wrap of the current Honda XR-V takes about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl film. That figure covers the five-door SUV body from 2022 onward, including the tailgate up to the glass edge. If you choose a chrome or patterned film, the estimate rises to about 66 ft (20 m). The film is cut from a 60-inch roll, so the length is the number to order.

Can I wrap only the hood or the roof of an XR-V?

Yes, you can wrap only the hood or the roof of an XR-V, and these partial wraps use far less film than a full color change. A hood wrap is a common way to add contrast, while a roof wrap in black can match the glass of the tailgate. Mirror caps are another small job that can be wrapped in under an hour. These panels are available on both generations of the XR-V.

Is an XR-V hard to wrap?

An XR-V is not hard to wrap, but the tailgate with the rear glass adds one extra step: the film must be cut at the edge of the glass. The five-door SUV body has a tall roof and deep tailgate, so two installers make the job safer and faster. The door handles and mirror caps should be removed to avoid visible seams. The body length of 172.4 in (4,380 mm) on the current model means the lower door panels need a long single piece of film.

How many generations of the XR-V does this page cover?

This page covers two generations of the Honda XR-V. The first generation was produced from 2014 to 2022, and the second generation has been produced since 2022. Both are five-door SUVs, but the second generation is longer at 172.4 in (4,380 mm). All the film estimates and wrap notes in this guide apply to both bodies.