Wraps by car

Honda e:Ny1 wrap

This page covers the Honda e:Ny1 wrap, from full vinyl wrap to partial jobs. The e:Ny1 has one generation in this catalog, produced from 2023 onward. A full wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 66 ft (20 m).

1generations17.5 mof film for a full wrap

Honda e:Ny1, first generation, factory photo
Honda e:Ny1, first generation. Factory color shown.

Honda e:Ny1 wrap colors and ideas

  • e:Ny1 black wrap
  • e:Ny1 white wrap
  • e:Ny1 gray wrap
  • e:Ny1 silver wrap
  • e:Ny1 red wrap
  • e:Ny1 blue wrap
  • e:Ny1 green wrap
  • e:Ny1 yellow wrap
  • e:Ny1 orange wrap
  • e:Ny1 purple wrap
  • e:Ny1 pink wrap
  • e:Ny1 teal wrap
  • e:Ny1 brown wrap
  • e:Ny1 gold wrap
  • e:Ny1 chrome wrap
  • e:Ny1 color shift wrap
  • e:Ny1 carbon fiber wrap
  • e:Ny1 camo and patterned wrap

How much vinyl to wrap a Honda e:Ny1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)172.7 in (4,387 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

e:Ny1 wrap cost factors

The e:Ny1 wrap cost depends on the film amount, the film type, and the labor for this car. A full wrap takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film, or about 66 ft (20 m) of chrome film. The charge port door and the tailgate glass add small trim steps. A partial job costs less because it uses less film.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

e:Ny1 wraps by generation

Swipe sideways. Tap a card for the full description.

Honda e:Ny1, first generation, factory photo
Factory color shown

2023–now e:Ny1 SUV (first generation)

2023–nowSUV (5 doors)172.7 in (4,387 mm)

The first-generation e:Ny1 is a five-door SUV with a length of 172.7 in (4,387 mm). That size and body style mean the film is cut into standard panels for the hood, roof, doors, fenders, and tailgate. The tailgate wraps only up to the edge of the rear glass. The charge port door is a small separate piece, so the panel count includes one extra piece.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an e:Ny1

A partial wrap on the e:Ny1 can be the roof, hood, or mirror caps. An e:Ny1 chrome delete covers window trim and badges with black film. Paint protection film (PPF) goes on the front end as a clear layer. Each of these jobs is smaller than a full wrap and uses less film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Honda e:Ny1: body, cut-outs and film

The Honda e:Ny1 vinyl wrap covers a five-door SUV body that is 172.7 in (4,387 mm) long. This size means the film is divided into a standard set of panels. The roof, hood, doors, fenders, and tailgate are wrapped as separate pieces. A full wrap has no unusually large single panel.

The Honda e:Ny1 has two details that shape e:Ny1 wrap ideas. The tailgate includes the rear glass, so the film ends at the edge of the glass. The charge port door is wrapped as a small piece of its own. Nothing else has to come off the car for a full wrap.

How much vinyl to wrap an e:Ny1 depends on the film estimate for the first generation. A full wrap takes about 57 ft (17.5 m) of standard cast film. Chrome or patterned film needs about 66 ft (20 m) because of extra trimming. The size for a partial wrap is lower and depends on the panels you choose.

Questions about wrapping a Honda e:Ny1

How much vinyl does it take to wrap a Honda e:Ny1?

A full wrap of a Honda e:Ny1 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 66 ft (20 m). These figures are for the newest body, the first generation. The number changes if you wrap only some panels.

Can I wrap only the hood or the roof of an e:Ny1?

Yes, you can wrap only the hood or the roof of an e:Ny1. A partial wrap is often done on the roof, hood, or mirror caps. The film for one panel is much less than a full wrap. The exact amount depends on the panel size.

Is an e:Ny1 hard to wrap?

The e:Ny1 is not hard to wrap, but two details add work. The tailgate glass means the film must end at the edge of the glass. The charge port door is wrapped as a small piece of its own. These steps take a little extra care but are normal for a wrap installer.

How many generations of the e:Ny1 does this page cover?

This page covers one generation of the e:Ny1, produced from 2023 to now. There are no older generations in this catalog. All film figures on this page refer to that first generation.