Wraps by car

Honda S660 wrap

The Honda S660 wrap page covers the first-generation convertible, produced from 2015 to now. The two-door sports car uses about 33 ft (10 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. This page explains film needs, cost factors, and wrap options for the S660.

1generations10 mof film for a full wrap

Honda S660, first generation, factory photo
Honda S660, first generation. Factory color shown.

Honda S660 wrap colors and ideas

  • Honda S660 black wrap
  • Honda S660 white wrap
  • Honda S660 gray wrap
  • Honda S660 silver wrap
  • Honda S660 red wrap
  • Honda S660 blue wrap
  • Honda S660 green wrap
  • Honda S660 yellow wrap
  • Honda S660 orange wrap
  • Honda S660 purple wrap
  • Honda S660 pink wrap
  • Honda S660 teal wrap
  • Honda S660 brown wrap
  • Honda S660 gold wrap
  • Honda S660 chrome wrap
  • Honda S660 color shift wrap
  • Honda S660 carbon fiber wrap
  • Honda S660 camo and patterned wrap

How much vinyl to wrap a Honda S660

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowconvertible (2 doors)133.7 in (3,395 mm)about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)

Honda S660 wrap cost factors

Honda S660 wrap cost depends on the film amount of about 33 ft (10 m) for a full color change. The convertible body has no top to wrap, which lowers material use compared to a hardtop car. Chrome or patterned film takes about 41 ft (12.5 m), increasing the material charge. Shop labor also varies with the small panels and the need to work around the fabric top.

  • Film for a full wrap: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Honda S660 wraps by generation

Swipe sideways. Tap a card for the full description.

Honda S660, first generation, factory photo
Factory color shown

2015–now Honda S660 convertible (first generation)

2015–nowconvertible (2 doors)133.7 in (3,395 mm)

The first-generation Honda S660 convertible top is not wrapped, and the film ends where the fabric top begins. The body is a 2-door convertible with a fabric top, so no vinyl is applied to the roof material. For a folding hard top version, each panel of the top is wrapped as a separate piece. The wrap stops at the top edge of the body to leave the folding mechanism untouched.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 33 ft (10 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Roof, hood, chrome delete and PPF on a Honda S660

A partial wrap on a Honda S660 can cover the hood, mirror caps, or rear deck instead of the full body. Chrome delete on this car covers the window trim and badges with black film to change the brightwork. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and still change the look or protection of the S660.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Honda S660: body, cut-outs and film

The Honda S660 vinyl wrap is shaped by its small convertible body and one generation in production. The car is 133.7 in (3,395 mm) long and has two doors, which reduces the number of large flat panels compared to longer cars. The fabric top is not wrapped, so the film stops where the top begins and the wrap area is smaller than a closed coupe. A full wrap of the S660 takes about 33 ft (10 m) of 60-inch (1.52 m) cast film.

Honda S660 wrap ideas include the convertible top area, which needs no film and creates a clean edge at the body line. The fabric top is left unwrapped and the film ends where it meets the body. For a folding hard top, each panel is wrapped as its own piece. Removing mirrors, door handles, and trim makes the installation cleaner and reduces cut-outs.

How much vinyl to wrap a Honda S660 depends on the body, because only one generation exists from 2015 to now. The convertible body means the top is not wrapped, so the film estimate of 33 ft (10 m) covers the lower body and doors. A chrome or patterned film uses about 41 ft (12.5 m) due to pattern matching and extra trim pieces. The 133.7 in (3,395 mm) length keeps the wrap area compact compared to larger sports cars.

Questions about wrapping a Honda S660

How much vinyl does it take to wrap a Honda S660?

A Honda S660 takes about 33 ft (10 m) of 60-inch (1.52 m) cast film for a full wrap. This figure is for the first-generation convertible body with no top wrap. A chrome or patterned film uses about 41 ft (12.5 m) because of pattern alignment and extra trim.

Is the top of a Honda S660 wrapped?

No, the top of a Honda S660 is not wrapped because it is a fabric convertible top. The film ends where the fabric begins, leaving the top material exposed. A folding hard top would be wrapped as panels of its own.

Can I wrap only the hood or the roof of a Honda S660?

Yes, you can wrap only the hood or the rear deck of a Honda S660. A partial wrap can cover the hood, mirror caps, or rear deck instead of the full body. The roof is not wrapped because the S660 has a fabric top.

Is a Honda S660 hard to wrap?

A Honda S660 is not the hardest car to wrap, but the fabric top adds work because the film must end cleanly where the top begins. The car is small at 133.7 in (3,395 mm), which means many tight panels and curves. A folding hard top, if present, requires wrapping each panel separately. The two-door body reduces the number of large flat areas, so installers spend extra time on edges and cut-outs.