Wraps by car

Honda e wrap

The Honda e wrap page covers the first-generation hatchback produced from 2019 to now. A full vinyl wrap of this subcompact car takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that to about 59 ft (18 m). This single-generation catalog makes film planning straightforward.

1generations15.5 mof film for a full wrap

Honda e, first generation, factory photo
Honda e, first generation. Factory color shown.

Honda e wrap colors and ideas

  • e black wrap
  • e white wrap
  • e gray wrap
  • e silver wrap
  • e red wrap
  • e blue wrap
  • e green wrap
  • e yellow wrap
  • e orange wrap
  • e purple wrap
  • e pink wrap
  • e teal wrap
  • e brown wrap
  • e gold wrap
  • e chrome wrap
  • e color shift wrap
  • e carbon fiber wrap
  • e camo and patterned wrap

How much vinyl to wrap a Honda e

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowhatchback (5 doors)153.3 in (3,895 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

e wrap cost factors

An e wrap cost depends on the film type, the amount of surface area, and the labor for the tailgate and charge port details. The car needs about 51 ft (15.5 m) of standard film or 59 ft (18 m) of chrome or patterned film. Installers also quote more for removing trim around the rear glass and wrapping the charge door. A design with printed graphics adds further cost.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

e wraps by generation

Swipe sideways. Tap a card for the full description.

Honda e, first generation, factory photo
Factory color shown

2019–now e hatchback (first generation)

2019–nowhatchback (5 doors)153.3 in (3,895 mm)

The first-generation Honda e presents a small five-door hatchback that is 153.3 in (3,895 mm) long. This compact size keeps the panel count low and the wrap time shorter than on longer cars. The tailgate glass is integrated, so the film ends at the glass edge, and the charge port door is wrapped as a separate piece. The numbers for this generation will stay valid as long as the body remains unchanged.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an e

A partial wrap on the Honda e can cover the roof, hood, and mirror caps for a two-tone look. An e chrome delete covers the window trim and badges with black film to replace the bright finish. Clear paint protection film (PPF) on the front end shields the bumper, hood edge, and mirrors from stone chips. These smaller jobs use much less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Honda e: body, cut-outs and film

A Honda e vinyl wrap follows the simple five-door hatchback body of this 153.3 in (3,895 mm) car. The short length means fewer panels than on longer hatchbacks, and the doors are modest in size. The tailgate includes the rear glass, so the film ends at the edge of the glass. The charge port door is wrapped as its own small piece.

When planning e wrap ideas, note that the tailgate has the rear glass set into it, so the film stops at the glass edge. The electric charge port door is covered as a separate small piece to keep the outline clean. These details mean the installer will cut around the glass and wrap the charge door before final trimming.

When you work out how much vinyl to wrap an e, the single generation keeps the numbers consistent. The hatchback body measures 153.3 in (3,895 mm) and needs about 51 ft (15.5 m) of standard cast film. If you choose a chrome or patterned film, plan for about 59 ft (18 m). Buying a small extra allowance is wise for mistakes on deep bumpers.

Questions about wrapping a Honda e

How much vinyl does it take to wrap a Honda e?

A full wrap of a Honda e takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast vinyl. If you choose chrome or patterned film, the figure rises to about 59 ft (18 m). These numbers cover the first-generation hatchback body with its integrated tailgate glass and charge port door.

Can I wrap only the hood or the roof of an e?

Yes, you can wrap only the hood or the roof of an e. A partial wrap job can include the roof, hood, and mirror caps as separate pieces. This is a good option for a two-tone roof or protecting a high-wear area without a full wrap.

Is an e hard to wrap?

An e is not especially hard to wrap, but it has two details that add work. The tailgate has the rear glass built into it, so the film must be trimmed neatly at the glass edge. The electric charge port door also needs to be wrapped as a separate small piece, which takes extra time.

How many generations of the e does this page cover?

This page covers one generation of the Honda e, the first generation produced from 2019 to now. The body style is a five-door hatchback with a length of 153.3 in (3,895 mm). There are no other generations in the catalog.