Wraps by car

Hummer H1 wrap

The Hummer H1 wrap page covers the full body of the 1992–2006 Hummer H1 in SUV and pickup styles. This catalog lists one generation of the H1. A full vinyl wrap of the newest body takes about 69 ft (21 m) for the pickup to 72 ft (22 m) for the SUV. Use 60-inch (1.52 m) cast film for this tall military-derived vehicle.

1generations22 mof film for a full wrap

Hummer H1, first generation, factory photo
Hummer H1, first generation. Factory color shown.

Hummer H1 wrap colors and ideas

  • Hummer H1 black wrap
  • Hummer H1 white wrap
  • Hummer H1 gray wrap
  • Hummer H1 silver wrap
  • Hummer H1 red wrap
  • Hummer H1 blue wrap
  • Hummer H1 green wrap
  • Hummer H1 yellow wrap
  • Hummer H1 orange wrap
  • Hummer H1 purple wrap
  • Hummer H1 pink wrap
  • Hummer H1 teal wrap
  • Hummer H1 brown wrap
  • Hummer H1 gold wrap
  • Hummer H1 chrome wrap
  • Hummer H1 color shift wrap
  • Hummer H1 carbon fiber wrap
  • Hummer H1 camo and patterned wrap

How much vinyl to wrap a Hummer H1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–2006SUV, pickup (2 or 4 or 5 doors)184.5 in (4,686 mm)about 69 ft (21 m) for the pickup to 72 ft (22 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 89 ft (27 m)

Hummer H1 wrap cost factors

Hummer H1 wrap cost depends on the body style, the film choice, and the amount of disassembly the installer does. The SUV needs about 72 ft (22 m) of film and the pickup about 69 ft (21 m), so the SUV is the larger job. A tall body of 77.0 in (1,956 mm) means the roof work needs a platform, which adds labor. Removing the door handles and mirrors gives a cleaner edge but takes more time than cutting around them.

  • Film for a full wrap: about 69 ft (21 m) for the pickup to 72 ft (22 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 89 ft (27 m).
  • Body: SUV, pickup (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (77.0 in (1,956 mm)): the roof is wrapped from a platform.

Hummer H1 wraps by generation

Swipe sideways. Tap a card for the full description.

Hummer H1, first generation, factory photo
Factory color shown

1992–2006 Hummer H1 SUV, pickup (first generation)

1992–2006SUV, pickup (2 or 4 or 5 doors)184.5 in (4,686 mm)

The first generation Hummer H1 from 1992 to 2006 includes SUV and pickup bodies with two, four, or five doors. A pickup bed means the cab and the bed are wrapped as two bodies for the film, and the inside of the bed stays bare. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The body length of 184.5 in (4,686 mm) is the same for the SUV and the pickup.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (77.0 in (1,956 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) for the pickup to 72 ft (22 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 89 ft (27 m).

Roof, hood, chrome delete and PPF on a Hummer H1

A partial wrap on a Hummer H1 is a realistic option when you want to change the look without covering the whole vehicle. You can wrap just the roof, hood, or mirror caps, which uses much less film than a full wrap. A Hummer H1 chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film that can be applied to the front end to protect the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Hummer H1: body, cut-outs and film

A Hummer H1 vinyl wrap has to follow boxy panels, wide fenders, and a tall 77.0 in (1,956 mm) body. The SUV and pickup bodies run 184.5 in (4,686 mm) long, so every panel is large and the wrap uses more film than a passenger car. Pickup and SUV bodies share the same front end, but the bed changes how the film is planned. The roof is high enough that the installer needs a platform to wrap it safely.

Hummer H1 wrap ideas start with the tailgate, because the rear glass is set into it and the film ends at the edge of the glass. The tall roof of the H1 must be wrapped from a platform, which adds time to the job. You can keep the mirrors black, or wrap the mirror caps as a small accent. The wide fender flares take film well, but they need relief cuts so the film does not lift at the edges.

If you ask how much vinyl to wrap a Hummer H1, the body style matters more than the year. The SUV uses about 72 ft (22 m) of 60-inch (1.52 m) cast film, while the pickup uses about 69 ft (21 m). A pickup cab and bed are wrapped as two separate bodies, so the film is planned in two sections. Chrome or patterned film can push the total up to about 89 ft (27 m) because the pattern must be matched.

Questions about wrapping a Hummer H1

How much vinyl does it take to wrap a Hummer H1?

A Hummer H1 takes about 69 ft (21 m) of vinyl for the pickup and about 72 ft (22 m) for the SUV. Those figures are for 60-inch (1.52 m) cast film. A pickup bed means the cab and bed are wrapped as two bodies, so the film is split between them. If you choose chrome or patterned film, you may need up to about 89 ft (27 m) to match the pattern.

Is the bed of a Hummer H1 wrapped?

No, the inside of a Hummer H1 pickup bed is not wrapped. The cab and the outside of the bed are wrapped as two separate bodies, but the inside of the bed stays bare. The tailgate is wrapped, but the film ends at the edge of the rear glass. The bed rails can be wrapped, but the floor and inner sides are left unpainted.

Which Hummer H1 body takes more film?

The SUV body of the Hummer H1 takes more film than the pickup. The SUV uses about 72 ft (22 m) of 60-inch (1.52 m) cast film, while the pickup uses about 69 ft (21 m). The SUV has a full enclosed rear body, so there is more painted surface to cover. The pickup has a bed that is not wrapped on the inside, which reduces the film needed.

Can I wrap only the hood or the roof of a Hummer H1?

Yes, you can wrap only the hood or the roof of a Hummer H1 as a partial wrap. The roof is tall at 77.0 in (1,956 mm), so the installer needs a platform. The hood is a large flat panel that uses less film than a full wrap. Mirror caps can be wrapped alone as a small accent, or paired with the hood and roof.