Wraps by car

Hummer H3 wrap

The Hummer H3 wrap page covers this boxy off-roader from 2005 to 2013 in one generation. A vinyl wrap on the SUV body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. The pickup body, which is longer, takes about 69 ft (21 m) for a full color change wrap.

1generations20 mof film for a full wrap

Hummer H3, first generation, factory photo
Hummer H3, first generation. Factory color shown.

Hummer H3 wrap colors and ideas

  • Hummer H3 black wrap
  • Hummer H3 white wrap
  • Hummer H3 gray wrap
  • Hummer H3 silver wrap
  • Hummer H3 red wrap
  • Hummer H3 blue wrap
  • Hummer H3 green wrap
  • Hummer H3 yellow wrap
  • Hummer H3 orange wrap
  • Hummer H3 purple wrap
  • Hummer H3 pink wrap
  • Hummer H3 teal wrap
  • Hummer H3 brown wrap
  • Hummer H3 gold wrap
  • Hummer H3 chrome wrap
  • Hummer H3 color shift wrap
  • Hummer H3 carbon fiber wrap
  • Hummer H3 camo and patterned wrap

How much vinyl to wrap a Hummer H3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2013SUV, pickup (4 or 5 doors)188.3 in (4,782 mm) to 212.7 in (5,403 mm)about 66 ft (20 m) for the SUV to 69 ft (21 m) for the pickup, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m)

Hummer H3 wrap cost factors

A Hummer H3 wrap cost depends on the body style, the film type, and the amount of disassembly. The SUV takes about 66 ft (20 m) of cast film while the pickup takes about 69 ft (21 m). The pickup bed adds a second body section, and the tall roof needs a platform for safe access. Film with a pattern or chrome finish can take up to about 80 ft (24.5 m), which increases the material part of the cost.

  • Film for a full wrap: about 66 ft (20 m) for the SUV to 69 ft (21 m) for the pickup, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).
  • Body: SUV, pickup (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (73.7 in (1,872 mm)): the roof is wrapped from a platform.

Hummer H3 wraps by generation

Swipe sideways. Tap a card for the full description.

Hummer H3, first generation, factory photo
Factory color shown

2005–2013 Hummer H3 SUV, pickup (first generation)

2005–2013SUV, pickup (4 or 5 doors)188.3 in (4,782 mm) to 212.7 in (5,403 mm)

The first generation of the Hummer H3, sold from 2005 to 2013, is the only generation in this catalog. The pickup bed means the cab and the bed are two bodies for the film, and the inside of the bed stays bare. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Fog lamps in the front bumper are on every trim and need cut-outs in the film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (73.7 in (1,872 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) for the SUV to 69 ft (21 m) for the pickup, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Hummer H3

A partial wrap on a Hummer H3 can cover the roof, the hood, or the mirror caps. A Hummer H3 chrome delete can black out the window trim and the badges with a black film. Paint protection film (PPF) is a clear film applied to the front end to guard against rock chips. These jobs use less material than a full body wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Hummer H3: body, cut-outs and film

A Hummer H3 vinyl wrap follows the body shape from 188.3 in (4,782 mm) to 212.7 in (5,403 mm) depending on the style. The SUV body wraps as one closed body with a tall roofline that requires a platform. The pickup body is longer, so the film is planned in two sections: cab and bed. Both body styles have slab sides that take large panels of film with fewer relief cuts.

Common Hummer H3 wrap ideas include a tailgate where the rear glass is set into it, so the film ends at the edge of the glass. The fog lamps in the front bumper on every trim need cut-outs in the bumper film. The pickup bed is not wrapped on the inside, and the cab and bed are treated as separate bodies. The body stands 73.7 in (1,872 mm) tall, so the roof is wrapped from a platform.

To work out how much vinyl to wrap a Hummer H3, note that the SUV and pickup share the same cab but different rear sections. The only generation in the catalog, 2005 to 2013, kept the same body dimensions. The pickup body is longer than the SUV, so the film estimate rises from about 66 ft (20 m) to 69 ft (21 m). A chrome or patterned film on the same body can take up to about 80 ft (24.5 m).

Questions about wrapping a Hummer H3

How much vinyl does it take to wrap a Hummer H3?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap a Hummer H3 SUV. A full wrap of the pickup body takes about 69 ft (21 m). These figures are for a color change wrap without chrome or patterned film.

Is the bed of a Hummer H3 wrapped?

No, the inside of the bed is not wrapped on a Hummer H3. The cab and the bed are wrapped as two separate bodies, with the inside of the bed left bare. The tailgate film ends at the edge of the rear glass.

Which Hummer H3 body takes more film?

The pickup body of the Hummer H3 takes more film than the SUV. The pickup is 212.7 in (5,403 mm) long and needs about 69 ft (21 m), while the SUV at 188.3 in (4,782 mm) needs about 66 ft (20 m).

Can I wrap only the hood or the roof of a Hummer H3?

Yes, you can wrap only the hood or the roof of a Hummer H3. A partial wrap also covers the mirror caps as a smaller job. A chrome delete can be done on the window trim and badges alone.